CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    725 Bare Chassis Articulated Truck
    View Product
    745 Articulated Truck
    View Product Remove

    Wheel Base Length
    Standard Wheel Base 156.7 in - -

    Weights
    Rated Payload 30.4 ton (US) 45.2 t -

    Engine
    Engine Model Cat® C9.3 Cat C18 -
    Gross Power - SAE J1995 342 HP 511 HP -
    Net Power - SAE J1349 334 HP 496 HP -
    Net Power - ISO 14396 338 HP 504 HP -
    Bore 4.5 in 5.7 in -
    Stroke 45.2 in 7.2 in -
    Displacement 567.5 in³ 1106 in³ -
    Peak Engine Torque Speed 1200 r/min 1200 r/min -
    Peak Engine Torque Gross (SAE J1995) 1275 lb/ft 1931 ft·lbf -
    Peak Engine Torque Net (SAE J1349) 1263 ft·lbf 1887 ft·lbf -
    No Engine De-rating Required Below 3000 ft 10000 ft -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C9.3 - -
    Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final - Cat® C18 -
    Note (4) - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio -
    Note (1) - The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. -
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. -
    Note (3) - Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. -
    Emissions - The 745 meets Tier 4 Final and Stage V emission standards. -

    Steering
    Lock to Lock 4.75 seconds at 60 rpm 4.8 seconds @ 60 rpm -

    Transmission
    Forward - 1 5 mile/h 3.8 mile/h -
    Forward - 2 9.4 mile/h 5 mile/h -
    Forward - 3 14.4 mile/h 7 mile/h -
    Forward - 4 22.1 mile/h 8.8 mile/h -
    Forward - 5 30.7 mile/h 11.6 mile/h -
    Forward - 6 36.3 mile/h 14.2 mile/h -
    Reverse - 1 5.5 mile/h 4 mile/h -
    Forward - 7 - 19.6 mile/h -
    Forward - 8 - 23.5 mile/h -
    Reverse - 2 - 9.1 mile/h -
    Forward - 9 - 34 mile/h -

    Service Refill Capacities
    Fuel Tank 91 gal (US) 145.3 gal (US) -
    Cooling System 18 gal (US) 23.7 gal (US) -
    Hydraulic System 24 gal (US) - -
    Engine Crankcase 8 gal (US) 13.7 gal (US) -
    Transmission 10 gal (US) - -
    Output Transfer Gear Box 5 gal (US) - -
    Final Drives/Differential 33 gal (US) - -
    Final Drive - Each 1.6 gal (US) 1.3 gal (US) -
    DEF Tank 4 gal (US) 5.3 gal (US) -
    Steering/Hoist Hydraulic System - 36.9 gal (US) -
    Transmission - OTG - 19.8 gal (US) -
    Axles - Each - 15.8 gal (US) -
    Brake Cooling Tank - 17.69 gal (US) -

    Standards
    Brakes ISO 3450:2011 ISO 3450 – 2011 -
    Cab - FOPS ISO 3449:2005 Level II ISO 3449 Level II – 2005 -
    Cab - ROPS ISO 3471:2008 ISO 3471 – 2008 -
    Steering ISO 5010:2019 ISO 5010 – 2007 -

    Turning Circle
    Turning Dimensions - SAE Turning Radius 294 in 340 in -
    Turning Dimensions - Inside Radius 153 in 174 in -
    Turning Dimensions - Clearance Radius 318 in 356 in -
    Turning Dimensions - Aisle Width 210 in 233 in -
    Turning Dimensions - Steer Angle - Left/Right 45 ° 45 deg -
    Note Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 29.5R25 tires. -

    Body Capacities
    Heaped (SAE 2:1) - 32.7 yd³ -
    Struck - 24.2 yd³ -
    Tailgate Heaped SAE 2:1 - 34.7 yd³ -
    Tailgate Struck - 25.5 yd³ -

    Sound Levels
    Interior Cab - 72 dB(A) -
    Note (1) - The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the -
    Note (2) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. -

    Operating Weights
    Rear Axle - Rated Load - 38691 lb -
    Front Axle - Empty - 43515 lb -
    Total - Loaded - 163942 lb -
    Rear Axle - Empty - 14731 lb -
    Rear Axle - Loaded - 53422 lb -
    Total - Rated Load - 90390 lb -
    Front Axle - Rated Load - 13007 lb -
    Center Axle - Rated Load - 38691 lb -
    Total - Empty - 73553 lb -
    Front Axle - Loaded - 56522 lb -
    Center Axle - Loaded - 54000 lb -
    Center Axle - Empty - 15309 lb -

    Body Plate
    Type - High Strength Brinell HB450 Wear Resistant Steel -
    Base - 0.55 in -
    Chute - 0.55 in -
    Side - 0.43 in -
    Front - 0.28 in -

    Body Hoist
    Raise (automatic) - 13 s -
    Raise (manual) - 12 s -
    Lower (automatic) - 10 s -
    Lower (manual) - 10 s -

    Optimal Loader/Truck Pass Matching
    Hydraulic Excavator: 390 - Passes - 4 -
    Wheel Loader: 982 - Passes - 4 -
    Wheel Loader: 972 - Passes - 43926 -
    Hydraulic Excavator: 374 - Passes - 5 -
    Note - An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. -
    Wheel Loader: 980 - Passes - 43926 -
    Add a Similar Product:
    • 740 EJ Articulated Truck Add
    • 740 GC Articulated Truck Add
    • 730 Articulated Truck Add
    • 730 EJ Articulated Truck Add
    • 735 Articulated Truck Add
    • 725 Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 730 Bare Chassis Articulated Truck Add