Compare Equipment Go Back
 725 Bare Chassis Articulated Truck |
 740 GC Bare Chassis Articulated Truck |
 730 EJ Articulated Truck |
|
Wheel Base Length |
|||
|---|---|---|---|
| Standard Wheel Base | 156.7 in | 162.4 in | - |
Weights |
|||
| Rated Payload | 30.4 ton (US) | 49.2 ton (US) | 30 ton (US) |
Engine |
|||
| Engine Model | Cat® C9.3 | Cat® C15 | Cat® C13 |
| Gross Power - SAE J1995 | 342 HP | 452 HP | 375 HP |
| Net Power - SAE J1349 | 334 HP | 439 HP | 367 HP |
| Net Power - ISO 14396 | 338 HP | 447 HP | 370 HP |
| Bore | 4.5 in | 5.4 in | 5.1 in |
| Stroke | 45.2 in | 6.75 in | 6.2 in |
| Displacement | 567.5 in³ | 926 in³ | 763 in³ |
| Peak Engine Torque Speed | 1200 r/min | 1200 r/min | 1200 r/min |
| Peak Engine Torque Gross (SAE J1995) | 1275 lb/ft | 1711 lb/ft | 1579 ft·lbf |
| Peak Engine Torque Net (SAE J1349) | 1263 ft·lbf | 1670 lb/ft | - |
| No Engine De-rating Required Below | 3000 ft | 10000 ft | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat® C9.3 | - | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | - | Cat® C15 | - |
| Emissions | - | - | The 730 EJ meets Tier 4 Final and Stage V emission standards. |
| Note (4) | - | - | Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions. |
| Note (3) | - | - | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (2) | - | - | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
| Note (1) | - | - | The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. |
| Note (5) | - | - | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
| Peak Engine Torque Net (ISO 14396) | - | - | 1564 ft·lbf |
| No Engine De-rating Below | - | - | 12500 ft |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage V | - | - | Cat C13 |
Steering |
|||
| Lock to Lock | 4.75 seconds at 60 rpm | 4.75 seconds at 60 rpm | 4.75 seconds @ 60 rpm |
Transmission |
|||
| Forward - 1 | 5 mile/h | 4 mile/h | 5 mile/h |
| Forward - 2 | 9.4 mile/h | 5.3 mile/h | 9 mile/h |
| Forward - 3 | 14.4 mile/h | 7.3 mile/h | 14 mile/h |
| Forward - 4 | 22.1 mile/h | 9.2 mile/h | 21 mile/h |
| Forward - 5 | 30.7 mile/h | 12.2 mile/h | 29 mile/h |
| Forward - 6 | 36.3 mile/h | 14.9 mile/h | 34 mile/h |
| Reverse - 1 | 5.5 mile/h | 4.2 mile/h | 6 mile/h |
| Forward - 7 | - | 20.6 mile/h | - |
| Forward - 8 | - | 24.7 mile/h | - |
| Forward - 9 | - | 35.7 mile/h | - |
| Reverse - 2 | - | 9.8 mile/h | - |
Service Refill Capacities |
|||
| Fuel Tank | 91 gal (US) | 143.5 gal (US) | 108.8 gal (US) |
| Cooling System | 18 gal (US) | 23.7 gal (US) | 21.9 gal (US) |
| Hydraulic System | 24 gal (US) | - | 29.1 gal (US) |
| Engine Crankcase | 8 gal (US) | 13.7 gal (US) | 10 gal (US) |
| Transmission | 10 gal (US) | - | 12.4 gal (US) |
| Output Transfer Gear Box | 5 gal (US) | - | 6.3 gal (US) |
| Final Drives/Differential | 33 gal (US) | - | 33 gal (US) |
| Final Drive - Each | 1.6 gal (US) | 1.3 gal (US) | - |
| DEF Tank | 4 gal (US) | 25 gal (US) | 5.3 gal (US) |
| Brake Cooling Tank | - | 17.7 gal (US) | - |
| Steering/Hoist Hydraulic System | - | 36.9 gal (US) | - |
| Transmission - OTG | - | 19.8 gal (US) | - |
| Axles - Each | - | 15.8 gal (US) | - |
Standards |
|||
| Brakes | ISO 3450:2011 | ISO 3450:2011 | ISO 3450 – 2011 |
| Cab - FOPS | ISO 3449:2005 Level II | ISO 3449:2005 Level II | ISO 3449 Level II – 2005 |
| Cab - ROPS | ISO 3471:2008 | ISO 3471:2008 | ISO 3471 – 2008 |
| Steering | ISO 5010:2019 | ISO 5010:2019 | ISO 5010 – 2007 |
Turning Circle |
|||
| Turning Dimensions - SAE Turning Radius | 294 in | 303 in | 294 in |
| Turning Dimensions - Inside Radius | 153 in | 156 in | 152 in |
| Turning Dimensions - Clearance Radius | 318 in | 330 in | 318 in |
| Turning Dimensions - Aisle Width | 210 in | 220 in | 214 in |
| Turning Dimensions - Steer Angle - Left/Right | 45 ° | 45° | 45° |
| Note | Dimensions are for machines equipped with 23.5R25 tires. | Dimensions are for machines equipped with 29.5 R25 tires. | Dimensions are for machines equipped with 750/65 R25 tires. |
Sound Levels |
|||
| Interior Cab | - | 72 dB(A) | 72 dB(A) |
| Note (2) | - | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Note (1) | - | - | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
Body Capacities |
|||
| Heaped (SAE 2:1) | - | - | 22.1 yd³ |
| Struck | - | - | 17.7 yd³ |
Operating Weights |
|||
| Front Axle - Rated Load | - | - | 1433 lb |
| Total - Loaded | - | - | 117528 lb |
| Center Axle - Loaded | - | - | 41502 lb |
| Rear Axle - Empty | - | - | 11707 lb |
| Rear Axle - Rated Load | - | - | 29156 lb |
| Front Axle - Loaded | - | - | 35009 lb |
| Center Axle - Empty | - | - | 12214 lb |
| Total - Rated Load | - | - | 59745 lb |
| Front Axle - Empty | - | - | 34723 lb |
| Total - Empty | - | - | 58643 lb |
| Rear Axle - Loaded | - | - | 41017 lb |
| Center Axle - Rated Load | - | - | 29156 lb |
Body Plate |
|||
| Type | - | - | High strength Brinell HB450 wear resistant steel |
Optimal Loader/Truck Pass Matching |
|||
| Hydraulic Excavators: 336F/336F XE - Passes | - | - | 5–6 |
| Note | - | - | An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increas |
| Hydraulic Excavators: 349F/349F XE - Passes | - | - | 4–5 |
| Wheel Loaders: 966M/966M XE - Passes | - | - | 4 |
| Wheel Loaders: 972M/972M XE - Passes | - | - | 3–4 |
| Wheel Loader: 962M - Passes | - | - | 4–5 |
| Wheel Loader: 950M - Passes | - | - | 5 |
Eject/Retract Times |
|||
| Retract Time | - | - | 15 s |
| Eject Time | - | - | 12 s |
Add a Similar Product:
