CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    140/140 AWD Motor Grader
    View Product Remove
    160 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP - -
    Bore 5.4 in 4.5 in 4.5 in
    Stroke 6 in 5.9 in 5.9 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - -
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Note (2) Optimized VHP Plus is standard for the 24. - -
    Standard Capability 122 °F 109 °F 109 °F
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - -
    Engine Model Cat C27 Cat® C9.3 Cat® C9.3
    Displacement 1648 in³ 567.5 in³ 567.5 in³
    Number of Cylinders 12 6 6
    Net Power Range (Tier 4) - 179 HP -
    Speed at Rated Power - 2,000 rpm 2,000 rpm
    Maximum Torque - VHP Plus - 840 lb/ft 1000 lb/ft
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 200 HP 241 HP
    VHP Plus - Gear - Net Power - Forward 2nd - 189 HP 231 HP
    VHP Plus - Gear - Net Power - Forward 5th - 215 HP 257 HP
    VHP Plus - Gear - Net Power - Forward 3rd - 200 HP 241 HP
    VHP Plus - Gear - Net Power - Forward 8th - 231 HP 272 HP
    Torque Rise - 38% 39%
    VHP Plus - Gear - Net Power - Reverse 2nd - 189 HP 231 HP
    VHP Plus - Gear - Net Power - Forward 1st - 179 HP 221 HP
    VHP Plus - Gear - Net Power - Forward 6th - 220 HP 262 HP
    VHP Plus - Gear - Net Power - Reverse 1st - 179 HP 221 HP
    VHP Plus Range - Net - 133-172 kW (179-231 hp) 165-203 kW (221-272 hp)
    VHP Plus - Gear - Net Power - Forward 7th - 225 HP 267 HP
    VHP Plus Range - Net - Metric - 133-172 kW (181-234 hp) 165-203 kW (224-276 hp)
    VHP Plus - Gear - Net Power - Forward 4th - 210 HP 252 HP
    Base Power (1st Gear) - Net - Metric - 181 HP 224 HP
    High Ambient - Fan Speed - Standard - 1,400 rpm 1,400 rpm
    Derating Altitude - 10000 ft 10000 ft
    High Ambient - Fan Speed - Maximum - 1,550 rpm 1,550 rpm
    High Ambient - Fan Speed - Minimum - 500 rpm 500 rpm
    High - Ambient Capability - 122 °F 122 °F
    Base Power (1st Gear) - Net - - 221 HP

    Weights
    Operating Weight - Typically Equipped 165314 lb 42647 lb 45547 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb 38069 lb
    Operating Weight - Typically Equipped - Front Axle - 12055 lb 13237 lb
    Operating Weight - Typically Equipped - Rear Axle - 30592 lb 32310 lb
    Gross Vehicle Weight - Base - Front Axle - 9343 lb 9907 lb
    Gross Vehicle Weight - Base - Rear Axle - 28077 lb 28812 lb
    Gross Vehicle Weight - Maximum - Total - 55144 lb 55144 lb
    Gross Vehicle Weight - Base - Total - 37420 lb 38719 lb
    Operating Weight - Typically Equipped - Total - 42647 lb 45547 lb

    Moldboard
    Blade Width 24 ft 12 ft 14 ft
    Blade Height 40 in - -
    Moldboard - Height - 24 in 24 in
    Moldboard - Thickness - 0.87 in 0.87 in
    Arc Radius - 16.3 in 16.3 in
    Throat Clearance - 6.5 in 6.5 in
    Cutting Edge Width - 6 in 6 in
    Cutting Edge Thickness - 0.6 in 0.6 in
    End Bit - Width - 6 in 6 in
    End Bit - Thickness - 0.6 in 0.6 in
    Blade Pull - Base GVW - 25269 lb 25931 lb
    Blade Pull - Maximum GVW - 34262 lb 34262 lb
    Blade Down Pressure - Base GVW - 16038 lb 17004 lb
    Blade Down Pressure - Maximum GVW - 29309 lb 29308 lb
    Moldboard - Blade Width - 12 ft 14 ft

    Blade Range
    Maximum Depth of Cut 21.7 in 28.1 in 29.5 in
    Maximum Lift Above Ground 16.1 in 18.9 in 17.8 in
    Circle Centershift - Right - 28.7 in 28.7 in
    Circle Centershift - Left - 27.4 in 27.4 in
    Moldboard Sideshift - Right - 26 in 26 in
    Moldboard Sideshift - Left - 20.1 in 20.1 in
    Maximum Blade Position Angle - 90° 90°
    Blade Tip Range - Forward - 40° 40°
    Blade Tip Range - Backward - 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right - 77.9 in 89.7 in
    Maximum Shoulder Reach Outside of Tires - Left - 70.5 in 82.3 in

    Machine Weight
    Weight* 161695 lb - -

    Operating Specifications
    Top Speed - Forward - 29 mile/h 29.5 mile/h
    Top Speed - Reverse - 23 mile/h 23.3 mile/h
    Turning Radius - Outside Front Tires - 25.59 ft 25.59 ft
    Steering Range - Left/Right - 50° 50°
    Articulation Angle - Left/Right - 20° 20°
    Forward - 1st - 2.5 mile/h 2.6 mile/h
    Forward - 2nd - 3.4 mile/h 3.5 mile/h
    Forward - 3rd - 5 mile/h 5.1 mile/h
    Forward - 4th - 6.9 mile/h 7 mile/h
    Forward - 5th - 10.6 mile/h 10.8 mile/h
    Forward - 6th - 14.5 mile/h 14.7 mile/h
    Forward - 7th - 19.9 mile/h 20.3 mile/h
    Forward - 8th - 29 mile/h 29.5 mile/h
    Reverse - 1st - 2 mile/h 2 mile/h
    Reverse - 2nd - 3.7 mile/h 3.8 mile/h
    Reverse - 3rd - 5.4 mile/h 5.5 mile/h
    Reverse - 4th - 8.4 mile/h 8.5 mile/h
    Reverse - 5th - 15.7 mile/h 16 mile/h
    Reverse - 6th - 23 mile/h 23.3 mile/h

    Service Refill
    Fuel Capacity - 104 gal (US) 104 gal (US)
    Cooling System - 15 gal (US) 15 gal (US)
    Hydraulic System - Total - 26.4 gal (US) 26.4 gal (US)
    Hydraulic System - Tank - 16.9 gal (US) 16.9 gal (US)
    Diesel Exhaust Fluid - 5.8 gal (US) 5.8 gal (US)
    Transmission - Differential - Final Drives - 18.5 gal (US) 18.5 gal (US)
    Engine Oil - 7.9 gal (US) 7.9 gal (US)
    Tandem Housing - Each - 20 gal (US) 22.9 gal (US)
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) 0.13 gal (US)
    Circle Drive Housing - 1.8 gal (US) 1.8 gal (US)

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse 8 Forward/6 Reverse
    Transmission - APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift
    Brakes - Service - Multiple Oil Disc Multiple Oil Disc
    Brakes - Service - Surface Area - 3565 in² 3565 in²
    Brakes - Parking - Multiple Oil Disc Multiple Oil Disc
    Brakes - Secondary - Dual Circuit Dual Circuit Control

    Hydraulic System
    Circuit Type - Parallel Parallel
    Pump Type - Variable Piston Variable Piston
    Pump Output - 55.7 gal/min 55.5 gal/min
    Maximum System Pressure - 3500 psi 3503 psi
    Reservoir Tank Capacity - 16.9 gal (US) 16.9 gal (US)
    Standby Pressure - 885 psi 885 psi

    Frame
    Drawbar - Width - 3 in 3 in
    Circle - Diameter - 60.2 in 61.1 in
    Circle - Blade Beam Thickness - 1.6 in 1.6 in
    Drawbar - Height - 6 in 6 in
    Front Frame Structure - Height - 12.6 in 12.6 in
    Circle - Height - 5.4 in 6.3 in
    Front Frame Structure - Width - 12 in 12 in
    Drawbar - Thickness - 0.5 in 0.5 in
    Front-Top/Bottom Plate - Width - 12 in 12 in
    Front-Top/Bottom Plate - Thickness - 0.87 in 0.87 in
    Front Axle - Height to Center - 23.5 in 23.5 in
    Front Axle - Wheel Lean - Left/Right - 18° 18°
    Front Axle - Total Oscillation per Side - 32° 32°

    Ripper
    Ripping Depth - Maximum - 16.8 in 16.8 in
    Ripper Shank Holder Spacing - 21 in 21 in
    Ripper Shank Holders - 5 5
    Penetration Force - 20812 lb 20812 lb
    Pry-Out Force - 27794 lb 28493 lb
    Machine Length Increase, Beam Raised - 40.6 in 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in 18.4 in
    Mid, V-Type - Scarifier Shank Holders - 11 11
    Rear - Scarifying Depth, Maximum - 16.8 in 16.8 in
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in 40.6 in
    Front, V-Type - Working Width - 47.4 in 47.4 in
    Mid, V-Type - Working Width - 46.6 in 46.6 in
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in 11.5 in
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May 5/11
    Rear - Working Width - 84 in 84 in
    Rear - Scarifier Shank Holders - 9 9
    Rear - Scarifier Shank Holder Spacing - 10.5 in 10.5 in

    Standards
    Brakes - ISO 3450 ISO 3450
    Sound - ISO 6394; ISO 6395 ISO 6394; ISO 6395
    Steering - ISO 5010 ISO 5010
    ROPS/FOPS - ISO 3471/ISO 3449 ISO 3471; ISO 3449

    Tandems
    Height - 19.9 in 22.5 in
    Width - 7.9 in 8 in
    Sidewall Thickness - Inner - 0.63 in 0.69 in
    Sidewall Thickness - Outer - 0.71 in 0.71 in
    Drive Chain Pitch - 2 in 2 in
    Wheel Axle Spacing - 60 in 60 in
    Tandem Oscillation - Front Up - 15° 15°
    Tandem Oscillation - Front Down - 25° 25°

    Dimensions
    Height - Top of Cab - 130 in 130 in
    Length - Counterweight to Ripper - 399 in 399 in
    Width - Outside Front Tires - 98.9 in 98.9 in
    Length - Front Axle to Mid Tandem - 241 in 241 in
    Length - Front Tire to Rear of Machine - 351 in 351 in
    Length - Front Axle to Moldboard - 100 in 100 in
    Length - Between Tandem Axles - 60 in 60 in
    Width - Outside Rear Tires - 98.9 in 98.9 in
    Width - Tire Center Lines - 84.3 in 84.3 in
    Height - Front Axle Center - 23.5 in 23.5 in
    Height - Exhaust Stack - 128 in 128 in
    Height - Top of Cylinders - 120 in 120 in
    Ground Clearance - Rear Axle - 13.3 in 13.3 in

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
    Add a Similar Product: