Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
-
Note (3)
-
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (2)
-
Optimized VHP Plus is standard for the 24.
-
Standard Capability
-
122 °F
-
Emissions
-
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
-
Note (4)
-
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
-
Weights
Operating Weight - Typically Equipped
74324 lb
165314 lb
-
Moldboard
Blade Width
18 ft
24 ft
-
Arc Radius
16.3 in
-
-
Throat Clearance
5 in
-
-
Down Force - Maximum GVW
43861 lb
-
-
Blade Pull* - Base GVW
47216 lb
-
-
Blade Pull* - Maximum GVW
52878 lb
-
-
End Bit - Width
6 in
-
-
Down Force - Base GVW
34008 lb
-
-
Cutting Edge Thickness
1.4 in
-
-
Thickness
1 in
-
-
Width
18 ft
-
-
Cutting Edge Width
10 in
-
-
End Bit - Thickness
0.75 in
-
-
Height
31 in
-
-
Note
*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
-
-
Blade Height
-
40 in
-
Service Refill
Fuel Capacity
131 gal (US)
-
-
Cooling System
18.5 gal (US)
-
-
Hydraulic System - Tank
18.5 gal (US)
-
-
Hydraulic System - Total
38.6 gal (US)
-
-
DEF Tank
4.2 gal (US)
-
-
Engine Oil
9.5 gal (US)
-
-
Transmission - Differential - Final Drives
26 gal (US)
-
-
Tandem Housing - Each
34 gal (US)
-
-
Front Wheel Spindle Bearing Housing
0.24 gal (US)
-
-
Circle Drive Housing
2.6 gal (US)
-
-
Power Train
Forward/Reverse Gears
8 Forward/6 Reverse
-
-
Transmission
Direct drive, power shift, countershaft
-
-
Brakes - Parking
Spring applied, hydraulically released
-
-
Brakes - Dynamic Brake Torque per Wheel
27069.27 lb/ft
-
-
Brakes - Service
Oil-actuated, oil disc
-
-
Brakes - Secondary
Oil-actuated, oil-disc
-
-
Hydraulic System
Circuit Type
Electro-hydraulic load sensing, closed center
-
-
Pump Type
Variable piston
-
-
Maximum System Pressure
3590 psi
-
-
Standby Pressure
856 psi
-
-
Pump Output*
74 gal/min
-
-
Note
*Pump output measured at 2,150 rpm.
-
-
Blade Range
Maximum Blade Position Angle
65°
-
-
Maximum Lift Above Ground
15.7 in
16.1 in
-
Maximum Depth of Cut
18.5 in
21.7 in
-
Maximum Shoulder Reach Outside of Tires - Right
103 in
-
-
Circle Centershift - Right
22 in
-
-
Maximum Shoulder Reach Outside of Tires - Left
103 in
-
-
Moldboard Sideshift - Right
31.1 in
-
-
Blade Tip Range - Backward
5°
-
-
Moldboard Sideshift - Left
29.1 in
-
-
Circle Centershift - Left
27.2 in
-
-
Blade Tip Range - Forward
40°
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
