CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    150 Motor Grader
    View Product
    140 Motor Grader LVR
    View Product Remove
    18 Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 200 HP - -
    Engine Model Cat® C9.3 Cat C9.3 Cat® C13
    Bore 4.5 in 4.5 in 5.1 in
    Stroke 5.9 in 5.9 in 6.2 in
    Speed at Rated Power 2,000 rpm - 2,000 rpm
    Maximum Torque - VHP Plus 920 lb/ft - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V -
    High Ambient - Fan Speed - Standard 1,400 rpm - -
    VHP Plus Range - Net - Metric 149-188 kW (202-255 hp) - -
    Standard Capability 109 °F 109 °F -
    VHP Plus Range - Net 149-188 kW (200-252 hp) - -
    Torque Rise 39% - -
    VHP Plus - Gear - Net Power - Reverse 1st 200 HP - -
    VHP Plus - Gear - Net Power - Forward 1st 200 HP - -
    VHP Plus - Gear - Net Power - Forward 8th 252 HP - -
    VHP Plus - Gear - Net Power - Forward 6th 241 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd 210 HP - -
    VHP Plus - Gear - Net Power - Forward 7th 247 HP - -
    VHP Plus - Gear - Net Power - Forward 5th 236 HP - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 220 HP - -
    VHP Plus - Gear - Net Power - Forward 4th 231 HP - -
    Base Power (1st Gear) - Net - Metric 202 HP - 309 HP
    VHP Plus - Gear - Net Power - Reverse 2nd 210 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd 220 HP - -
    Displacement 567.5 in³ 567.5 in³ 763 in³
    Number of Cylinders 6 6 6
    Derating Altitude 10000 ft - -
    High Ambient - Fan Speed - Maximum 1,550 rpm - -
    High Ambient - Fan Speed - Minimum 500 rpm - -
    High - Ambient Capability 122 °F - -
    Net Power - EEC 80/1269 - 250 HP -
    Net Power - ISO 9249/SAE J1349 - 250 HP -
    Engine RPM - 2,000 -
    Torque Rise - ISO 9294 - 44% -
    Base Power (1st Gear) - Net - - 304 HP
    Standard - Ambient Capability - - 122 °F
    VHP Range - Net - - 227-266 kW (304-357 hp)
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 1270 lb/ft
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 12176 ft
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 12973 ft
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 1270 lb/ft
    Standard - Fan Speed - Minimum - - 550 rpm
    Emissions (1) - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 40%
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 1306 lb/ft
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 12500 ft
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 38%
    Standard - Fan Speed - Maximum - - 1,450 rpm
    Emissions (2) - - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 38%
    VHP Range - Net - Metric - - 227-266 kW (309-362 hp)
    Emissions (3) - - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards
    Optimized VHP Range - Net - - 227-266 kW (304-357 hp)

    Weights
    Operating Weight - Typically Equipped 43950 lb 20236 lb 74324 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - -
    Operating Weight - Typically Equipped - Front Axle 12549 lb - -
    Operating Weight - Typically Equipped - Rear Axle 31401 lb - -
    Gross Vehicle Weight - Base - Front Axle 9601 lb - -
    Gross Vehicle Weight - Base - Rear Axle 28590 lb - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - -
    Operating Weight - Typically Equipped - Total 43950 lb - -
    Gross Vehicle Weight - Base - Total 38191 lb - -

    Moldboard
    Blade Width 12 ft 12 ft 18 ft
    Moldboard - Height 24 in - -
    Moldboard - Thickness 0.87 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 5 in
    Cutting Edge Width 6 in - 10 in
    Cutting Edge Thickness 0.6 in - 1.4 in
    End Bit - Width 6 in - 6 in
    End Bit - Thickness 0.6 in - 0.75 in
    Blade Pull - Base GVW 25732 lb - -
    Blade Pull - Maximum GVW 34262 lb - -
    Blade Down Pressure - Base GVW 16480 lb - -
    Blade Down Pressure - Maximum GVW 29308 lb - -
    Moldboard - Blade Width 12 ft - -
    Cutting Edge - 6 in -
    End Bit - 6 in -
    Down Force - Maximum GVW - - 43861 lb
    Blade Pull* - Base GVW - - 47216 lb
    Blade Pull* - Maximum GVW - - 52878 lb
    Down Force - Base GVW - - 34008 lb
    Thickness - - 1 in
    Width - - 18 ft
    Height - - 31 in
    Note - - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

    Operating Specifications
    Top Speed - Forward 29 mile/h - 32.1 mile/h
    Top Speed - Reverse 23 mile/h - 25.3 mile/h
    Turning Radius - Outside Front Tires 25.59 ft - 30.5 ft
    Steering Range - Left/Right 50° - 47.5°
    Articulation Angle - Left/Right 20° - 20°
    Forward - 1st 2.5 mile/h - 2.8 mile/h
    Forward - 2nd 3.4 mile/h - 3.8 mile/h
    Forward - 3rd 5 mile/h - 5.5 mile/h
    Forward - 4th 6.9 mile/h - 7.6 mile/h
    Forward - 5th 10.6 mile/h - 11.8 mile/h
    Forward - 6th 14.5 mile/h - 16 mile/h
    Forward - 7th 19.9 mile/h - 22 mile/h
    Forward - 8th 29 mile/h - 32.1 mile/h
    Reverse - 1st 2 mile/h - 2.2 mile/h
    Reverse - 2nd 3.7 mile/h - 4.1 mile/h
    Reverse - 3rd 5.4 mile/h - 6 mile/h
    Reverse - 4th 8.4 mile/h - 9.3 mile/h
    Reverse - 5th 15.7 mile/h - 17.4 mile/h
    Reverse - 6th 23 mile/h - 25.3 mile/h
    Note - - Calculated with no slip and 23.5R25 L-3 tires.

    Service Refill
    Fuel Capacity 104 gal (US) - 131 gal (US)
    Cooling System 15 gal (US) - 18.5 gal (US)
    Hydraulic System - Total 26.4 gal (US) - 38.6 gal (US)
    Hydraulic System - Tank 16.9 gal (US) - 18.5 gal (US)
    Transmission - Differential - Final Drives 18.5 gal (US) - 26 gal (US)
    Diesel Exhaust Fluid 5.8 gal (US) - -
    Engine Oil 7.9 gal (US) - 9.5 gal (US)
    Tandem Housing - Each 20 gal (US) - 34 gal (US)
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - 0.24 gal (US)
    Circle Drive Housing 1.8 gal (US) - 2.6 gal (US)
    Hydraulic System - 14.5 gal (US) -
    Engine Crankcase - 7.9 gal (US) -
    Circle Drive - 1.8 gal (US) -
    Fuel Tank - 100 gal (US) -
    Front Wheel Spindle Bearing - Each - 0.13 gal (US) -
    DEF Tank - - 4.2 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - 8 Forward/6 Reverse
    Transmission APECS, Direct Drive, Powershift - Direct drive, power shift, countershaft
    Brakes - Service Multiple Oil Disc - Oil-actuated, oil disc
    Brakes - Service - Surface Area 3565 in² - -
    Brakes - Parking Multiple Oil Disc - Spring applied, hydraulically released
    Brakes - Secondary Dual Circuit - Oil-actuated, oil-disc
    Brakes - Dynamic Brake Torque per Wheel - - 27069.27 lb/ft

    Hydraulic System
    Circuit Type Parallel - Electro-hydraulic load sensing, closed center
    Pump Type Variable Piston - Variable piston
    Pump Output 55.7 gal/min - -
    Maximum System Pressure 3500 psi - 3590 psi
    Reservoir Tank Capacity 16.9 gal (US) - -
    Standby Pressure 885 psi - 856 psi
    Pump Output* - - 74 gal/min
    Note - - *Pump output measured at 2,150 rpm.

    Frame
    Drawbar - Width 3 in - 3 in
    Circle - Diameter 60.2 in - 71.7 in
    Circle - Blade Beam Thickness 1.6 in - 2 in
    Drawbar - Height 6 in - 8 in
    Front Frame Structure - Width 12 in - 14 in
    Front Frame Structure - Height 12.6 in - 18.1 in
    Circle - Height 5.4 in - -
    Drawbar - Thickness 0.5 in - -
    Front-Top/Bottom Plate - Width 12 in - -
    Front-Top/Bottom Plate - Thickness 0.87 in - -
    Front Axle - Height to Center 23.5 in - 26.4 in
    Front Axle - Wheel Lean - Left/Right 18° - -
    Front Axle - Total Oscillation per Side 32° - 35°
    Front Frame Structure - Thickness - - 0.6 in
    Front Axle - Wheel Lean - - 18° Left/17° Right

    Blade Range
    Circle Centershift - Right 28.7 in - 22 in
    Circle Centershift - Left 27.4 in - 27.2 in
    Moldboard Sideshift - Right 26 in - 31.1 in
    Moldboard Sideshift - Left 20.1 in - 29.1 in
    Maximum Blade Position Angle 90° - 65°
    Blade Tip Range - Forward 40° - 40°
    Blade Tip Range - Backward 5° - 5°
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in - 103 in
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in - 103 in
    Maximum Lift Above Ground 18.9 in 18.9 in 15.7 in
    Maximum Depth of Cut 28.1 in 28.9 in 18.5 in

    Ripper
    Ripper Shank Holder Spacing 21 in - -
    Ripping Depth - Maximum 16.8 in - 17.8 in
    Ripper Shank Holders 5 - 7
    Penetration Force 20812 lb - 30311 lb
    Pry-Out Force 27794 lb - 43700 lb
    Machine Length Increase, Beam Raised 40.6 in - 63.4 in
    Shank Holder Spacing - Minimum - - 17.5 in
    Shank Holder Spacing - Maximum - - 20 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - -
    Rear - Scarifying Depth, Maximum 16.8 in - -
    Mid, V-Type - Working Width 46.6 in - -
    Front, V-Type - Working Width 47.4 in - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - -
    Mid, V-Type - Scarifier Shank Holders 11 - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - -
    Rear - Working Width 84 in - -
    Rear - Scarifier Shank Holders 9 - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - -

    Standards
    Steering ISO 5010 - ISO 5010: 2007
    ROPS/FOPS ISO 3471/ISO 3449 - ISO 3471: 2008/ISO 3449: 2005
    Brakes ISO 3450 - ISO 3450: 2011
    Sound ISO 6394; ISO 6395 - ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -

    Tandems
    Height 19.9 in - 25.5 in
    Width 7.9 in - 9.3 in
    Sidewall Thickness - Inner 0.63 in - 0.9 in
    Sidewall Thickness - Outer 0.71 in - 0.9 in
    Drive Chain Pitch 2 in - 2.5 in
    Wheel Axle Spacing 60 in - 72.5 in
    Tandem Oscillation - Front Up 15° - 15°
    Tandem Oscillation - Front Down 25° - 25°

    Dimensions
    Height - Top of Cab 130 in - -
    Length - Counterweight to Ripper 399 in - -
    Width - Outside Front Tires 98.9 in - -
    Length - Front Axle to Mid Tandem 241 in - -
    Length - Front Tire to Rear of Machine 351 in - -
    Length - Front Axle to Moldboard 100 in - -
    Length - Between Tandem Axles 60 in - -
    Width - Outside Rear Tires 98.9 in - -
    Width - Tire Center Lines 84.3 in - -
    Height - Front Axle Center 23.5 in - -
    Height - Exhaust Stack 128 in - -
    Height - Top of Cylinders 120 in - -
    Ground Clearance - Rear Axle 13.3 in - -
    Basic Blade Width - 140 in -
    Length of Machine* - 397.6 in -
    Width - 97.6 in -
    Note - *Typically equipped with push block and ripper. -
    Maximum Height - 132 in -

    Machine Weight
    Note - *Typically equipped with push block and ripper. -
    All-Wheel Drive (AWD) Weight - 44613 lb -
    Weight* - 42325 lb -

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 53830 lb
    Gross Vehicle Weight - Base** - Total - - 72298 lb
    Gross Vehicle Weight - Maximum Tested - Rear Axle - - 58753 lb
    Gross Vehicle Weight - Maximum Tested - Front Axle - - 26125 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 20494 lb
    Gross Vehicle Weight - Base** - Front Axle - - 19837 lb
    Gross Vehicle Weight - Maximum Tested - Total - - 84877 lb
    Gross Vehicle Weight - Typically Equipped - Total - - 74324 lb
    Gross Vehicle Weight - Base** - Rear Axle - - 52461 lb
    Note (2) - - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab.
    Note (1) - - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt.

    Dimensions (Approximate)
    Height - Top of Cylinders - - 122.6 in
    Width - Outside Rear Tires - - 134.3 in
    Height - Exhaust Stack - - 141.1 in
    Length - Between Tandem Axles - - 72.5 in
    Length - Front Axle to Mid Tandem - - 290 in
    Width - Tire Center Lines - - 106.4 in
    Length - Front Axle to Moldboard - - 120.7 in
    Length - Counterweight to Ripper - - 474.4 in
    Height - Front Axle Center - - 29.9 in
    Width - Outside Front Tires - - 134.3 in
    Length - Front Tire to Rear of Machine - Including Tow Hitch - - 417 in
    Height - Top of Cab - - 147.5 in
    Ground Clearance - Rear Axle - - 16.7 in

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 1st - - 309 HP
    Gear - Forward 2nd - - 309 HP
    Gear - Reverse 2nd - - 309 HP
    Gear - Forward 4th - - 325 HP
    Gear - Forward 6th - - 341 HP
    Gear - Forward 5th - - 332 HP
    Gear - Forward 8th - - 362 HP
    Gear - Reverse 1st - - 309 HP
    Gear - Forward 3rd - - 315 HP
    Gear - Forward 7th - - 347 HP
    Gear - Reverse 3rd-6th - - 315 HP

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - - Tires: 23.5R25 Bridgestone VKT 1 Star
    Wheel Group - 19.5×25 MP (1) - - Tires: 23.5R25 Bridgestone VKT 2 Star
    Wheel Group - 19.5×25 MP (3) - - Tires: 23.5R25 Bridgestone VJT 1 Star
    Wheel Group - 19.5×25 MP (4) - - Tires: 23.5R25 Michelin XHA 2 Star
    Wheel Group - 19.5×25 MP (5) - - Tires: 23.5R25 Michelin XLDD 2 Star L5

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
    Gear - Forward 4th - - 321 HP
    Gear - Reverse 2nd - - 304 HP
    Gear - Forward 1st - - 304 HP
    Gear - Reverse 3rd-6th - - 311 HP
    Gear - Forward 3rd - - 311 HP
    Gear - Forward 5th - - 327 HP
    Gear - Forward 7th - - 342 HP
    Gear - Forward 2nd - - 304 HP
    Gear - Reverse 1st - - 304 HP
    Gear - Forward 6th - - 337 HP
    Gear - Forward 8th - - 357 HP
    Add a Similar Product: