CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 GC Motor Grader
    View Product
    160 Motor Grader
    View Product Remove

    Engine
    Engine Power (ISO 14396) 196 HP - -
    Bore 4.1 in 4.5 in -
    Derating Altitude 9842 ft 10000 ft -
    Displacement 427.8 in³ 567.5 in³ -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V -
    Engine Model Cat 7.1 Cat® C9.3 -
    Engine RPM 2,200 - -
    Standard Capability 109 °F 109 °F -
    High - Ambient Capability 122 °F 122 °F -
    Maximum Torque - ISO 9249 616 lb/ft - -
    Stroke 5.3 in 5.9 in -
    Torque Rise - ISO 9294 40% - -
    Number of Cylinders 6 6 -
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. - -
    Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Note (3) Power as declared per ISO 14396 - -
    Engine Power AWD (ISO 14396) 196 HP - -
    Base Power (1st Gear) - Net - 221 HP -
    Speed at Rated Power - 2,000 rpm -
    VHP Plus - Gear - Net Power - Forward 1st - 221 HP -
    Torque Rise - 39% -
    VHP Plus - Gear - Net Power - Forward 8th - 272 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - 241 HP -
    VHP Plus - Gear - Net Power - Forward 4th - 252 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - 231 HP -
    VHP Plus - Gear - Net Power - Forward 6th - 262 HP -
    Maximum Torque - VHP Plus - 1000 lb/ft -
    VHP Plus Range - Net - 165-203 kW (221-272 hp) -
    VHP Plus - Gear - Net Power - Forward 7th - 267 HP -
    VHP Plus - Gear - Net Power - Reverse 1st - 221 HP -
    Base Power (1st Gear) - Net - Metric - 224 HP -
    High Ambient - Fan Speed - Standard - 1,400 rpm -
    VHP Plus - Gear - Net Power - Forward 5th - 257 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd - 231 HP -
    VHP Plus Range - Net - Metric - 165-203 kW (224-276 hp) -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 241 HP -
    High Ambient - Fan Speed - Maximum - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - 500 rpm -

    Weights
    Operating Weight - Typically Equipped 38912 lb 45547 lb -
    Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb -
    Gross Vehicle Weight - Base - Front Axle - 9907 lb -
    Gross Vehicle Weight - Base - Rear Axle - 28812 lb -
    Gross Vehicle Weight - Maximum - Total - 55144 lb -
    Operating Weight - Typically Equipped - Front Axle - 13237 lb -
    Gross Vehicle Weight - Base - Total - 38719 lb -
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb -
    Operating Weight - Typically Equipped - Total - 45547 lb -
    Operating Weight - Typically Equipped - Rear Axle - 32310 lb -

    Moldboard
    Blade Width 12 ft 14 ft -
    Arc Radius 16.3 in 16.3 in -
    Blade Height 24 in - -
    Cutting Edge Width 6 in 6 in -
    End Bit 6 in - -
    Throat Clearance 4.4 in 6.5 in -
    Moldboard - Height - 24 in -
    Moldboard - Thickness - 0.87 in -
    Cutting Edge Thickness - 0.6 in -
    End Bit - Width - 6 in -
    End Bit - Thickness - 0.6 in -
    Blade Pull - Base GVW - 25931 lb -
    Blade Pull - Maximum GVW - 34262 lb -
    Blade Down Pressure - Base GVW - 17004 lb -
    Blade Down Pressure - Maximum GVW - 29308 lb -
    Moldboard - Blade Width - 14 ft -

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. - -
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Dimensions
    Width All Wheel Drive (AWD) 99.3 in - -
    Length of Machine* 406.7 in - -
    Maximum Height 132.4 in - -
    Width 95.6 in - -
    Note *Typically equipped with push block and ripper. - -
    Height - Top of Cab - 130 in -
    Length - Counterweight to Ripper - 399 in -
    Width - Outside Front Tires - 98.9 in -
    Length - Front Axle to Mid Tandem - 241 in -
    Length - Front Tire to Rear of Machine - 351 in -
    Length - Front Axle to Moldboard - 100 in -
    Length - Between Tandem Axles - 60 in -
    Width - Outside Rear Tires - 98.9 in -
    Width - Tire Center Lines - 84.3 in -
    Height - Front Axle Center - 23.5 in -
    Height - Exhaust Stack - 128 in -
    Height - Top of Cylinders - 120 in -
    Ground Clearance - Rear Axle - 13.3 in -

    Blade Range
    Circle Center Shift Left 29.6 in - -
    Circle Center Shift Right 28.7 in - -
    Maximum Depth of Cut 28.1 in 29.5 in -
    Maximum Lift Above Ground 18.7 in 17.8 in -
    Maximum Shoulder Reach Left 74.3 in - -
    Maximum Shoulder Reach Right 71.3 in - -
    Moldboard Side Shift Left 25.6 in - -
    Moldboard Side Shift Right 20.7 in - -
    Blade Tip Range Backward 5 - -
    Blade Tip Range Forward 40 - -
    Circle Centershift - Right - 28.7 in -
    Circle Centershift - Left - 27.4 in -
    Moldboard Sideshift - Right - 26 in -
    Moldboard Sideshift - Left - 20.1 in -
    Maximum Blade Position Angle - 90° -
    Blade Tip Range - Forward - 40° -
    Blade Tip Range - Backward - 5° -
    Maximum Shoulder Reach Outside of Tires - Left - 82.3 in -
    Maximum Shoulder Reach Outside of Tires - Right - 89.7 in -

    Service Refill Capacities
    Fuel Tank 78 gal (US) - -
    Circle Drive with Slip Clutch 2 gal (US) - -
    Circle Drive without Slip Clutch 0.5 gal (US) - -
    Cooling System 40 l - -
    Engine Crankcase 5.5 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) - -
    Hydraulic System 11.9 gal (US) - -
    Transmission 4.8 gal (US) - -

    Weight
    Weight (Tier 4 Final)** 40488 lb - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - -
    All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - -
    Weight (Stage V)* 38912 lb - -

    Operating Specifications
    Top Speed - Forward - 29.5 mile/h -
    Top Speed - Reverse - 23.3 mile/h -
    Turning Radius - Outside Front Tires - 25.59 ft -
    Steering Range - Left/Right - 50° -
    Articulation Angle - Left/Right - 20° -
    Forward - 1st - 2.6 mile/h -
    Forward - 2nd - 3.5 mile/h -
    Forward - 3rd - 5.1 mile/h -
    Forward - 4th - 7 mile/h -
    Forward - 5th - 10.8 mile/h -
    Forward - 6th - 14.7 mile/h -
    Forward - 7th - 20.3 mile/h -
    Forward - 8th - 29.5 mile/h -
    Reverse - 1st - 2 mile/h -
    Reverse - 2nd - 3.8 mile/h -
    Reverse - 3rd - 5.5 mile/h -
    Reverse - 4th - 8.5 mile/h -
    Reverse - 5th - 16 mile/h -
    Reverse - 6th - 23.3 mile/h -

    Service Refill
    Fuel Capacity - 104 gal (US) -
    Cooling System - 15 gal (US) -
    Hydraulic System - Total - 26.4 gal (US) -
    Hydraulic System - Tank - 16.9 gal (US) -
    Transmission - Differential - Final Drives - 18.5 gal (US) -
    Diesel Exhaust Fluid - 5.8 gal (US) -
    Engine Oil - 7.9 gal (US) -
    Tandem Housing - Each - 22.9 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) -
    Circle Drive Housing - 1.8 gal (US) -

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse -
    Transmission - APECS, Direct Drive, Powershift -
    Brakes - Service - Multiple Oil Disc -
    Brakes - Service - Surface Area - 3565 in² -
    Brakes - Parking - Multiple Oil Disc -
    Brakes - Secondary - Dual Circuit Control -

    Hydraulic System
    Circuit Type - Parallel -
    Pump Type - Variable Piston -
    Pump Output - 55.5 gal/min -
    Maximum System Pressure - 3503 psi -
    Reservoir Tank Capacity - 16.9 gal (US) -
    Standby Pressure - 885 psi -

    Frame
    Drawbar - Width - 3 in -
    Circle - Diameter - 61.1 in -
    Circle - Blade Beam Thickness - 1.6 in -
    Drawbar - Height - 6 in -
    Front Frame Structure - Width - 12 in -
    Circle - Height - 6.3 in -
    Front Frame Structure - Height - 12.6 in -
    Drawbar - Thickness - 0.5 in -
    Front-Top/Bottom Plate - Width - 12 in -
    Front-Top/Bottom Plate - Thickness - 0.87 in -
    Front Axle - Height to Center - 23.5 in -
    Front Axle - Wheel Lean - Left/Right - 18° -
    Front Axle - Total Oscillation per Side - 32° -

    Ripper
    Ripping Depth - Maximum - 16.8 in -
    Ripper Shank Holder Spacing - 21 in -
    Ripper Shank Holders - 5 -
    Penetration Force - 20812 lb -
    Pry-Out Force - 28493 lb -
    Machine Length Increase, Beam Raised - 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in -
    Mid, V-Type - Working Width - 46.6 in -
    Rear - Scarifying Depth, Maximum - 16.8 in -
    Front, V-Type - Working Width - 47.4 in -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 5/11 -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in -
    Mid, V-Type - Scarifier Shank Holders - 11 -
    Rear - Working Width - 84 in -
    Rear - Scarifier Shank Holders - 9 -
    Rear - Scarifier Shank Holder Spacing - 10.5 in -

    Standards
    Brakes - ISO 3450 -
    ROPS/FOPS - ISO 3471; ISO 3449 -
    Steering - ISO 5010 -
    Sound - ISO 6394; ISO 6395 -

    Tandems
    Height - 22.5 in -
    Width - 8 in -
    Sidewall Thickness - Inner - 0.69 in -
    Sidewall Thickness - Outer - 0.71 in -
    Drive Chain Pitch - 2 in -
    Wheel Axle Spacing - 60 in -
    Tandem Oscillation - Front Up - 15° -
    Tandem Oscillation - Front Down - 25° -
    Add a Similar Product: