CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 GC Motor Grader
    View Product
    140 Motor Grader LVR
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Engine Power (ISO 14396) 196 HP - -
    Bore 4.1 in 4.5 in 4.5 in
    Derating Altitude 9842 ft - 10000 ft
    Displacement 427.8 in³ 567.5 in³ 567.5 in³
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat 7.1 Cat C9.3 Cat® C9.3
    Engine RPM 2,200 2,000 -
    Standard Capability 109 °F 109 °F 109 °F
    High - Ambient Capability 122 °F - 122 °F
    Maximum Torque - ISO 9249 616 lb/ft - -
    Stroke 5.3 in 5.9 in 5.9 in
    Torque Rise - ISO 9294 40% 44% -
    Number of Cylinders 6 6 6
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. - -
    Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Note (3) Power as declared per ISO 14396 - -
    Engine Power AWD (ISO 14396) 196 HP - -
    Net Power - EEC 80/1269 - 250 HP -
    Net Power - ISO 9249/SAE J1349 - 250 HP -
    Net Power Range (Tier 4) - - 200 HP
    Speed at Rated Power - - 2,000 rpm
    Maximum Torque - VHP Plus - - 920 lb/ft
    High Ambient - Fan Speed - Standard - - 1,400 rpm
    VHP Plus Range - Net - Metric - - 149-188 kW (202-255 hp)
    VHP Plus Range - Net - - 149-188 kW (200-252 hp)
    Torque Rise - - 39%
    VHP Plus - Gear - Net Power - Reverse 1st - - 200 HP
    VHP Plus - Gear - Net Power - Forward 1st - - 200 HP
    VHP Plus - Gear - Net Power - Forward 8th - - 252 HP
    VHP Plus - Gear - Net Power - Forward 6th - - 241 HP
    VHP Plus - Gear - Net Power - Forward 2nd - - 210 HP
    VHP Plus - Gear - Net Power - Forward 7th - - 247 HP
    VHP Plus - Gear - Net Power - Forward 5th - - 236 HP
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 220 HP
    VHP Plus - Gear - Net Power - Forward 4th - - 231 HP
    Base Power (1st Gear) - Net - Metric - - 202 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - - 210 HP
    VHP Plus - Gear - Net Power - Forward 3rd - - 220 HP
    High Ambient - Fan Speed - Maximum - - 1,550 rpm
    High Ambient - Fan Speed - Minimum - - 500 rpm

    Weights
    Operating Weight - Typically Equipped 38912 lb 20236 lb 43950 lb
    Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb
    Operating Weight - Typically Equipped - Front Axle - - 12549 lb
    Operating Weight - Typically Equipped - Rear Axle - - 31401 lb
    Gross Vehicle Weight - Base - Front Axle - - 9601 lb
    Gross Vehicle Weight - Base - Rear Axle - - 28590 lb
    Gross Vehicle Weight - Maximum - Total - - 55144 lb
    Operating Weight - Typically Equipped - Total - - 43950 lb
    Gross Vehicle Weight - Base - Total - - 38191 lb

    Moldboard
    Blade Width 12 ft 12 ft 12 ft
    Arc Radius 16.3 in 16.3 in 16.3 in
    Blade Height 24 in - -
    Cutting Edge Width 6 in - 6 in
    End Bit 6 in 6 in -
    Throat Clearance 4.4 in 6.5 in 6.5 in
    Cutting Edge - 6 in -
    Moldboard - Height - - 24 in
    Moldboard - Thickness - - 0.87 in
    Cutting Edge Thickness - - 0.6 in
    End Bit - Width - - 6 in
    End Bit - Thickness - - 0.6 in
    Blade Pull - Base GVW - - 25732 lb
    Blade Pull - Maximum GVW - - 34262 lb
    Blade Down Pressure - Base GVW - - 16480 lb
    Blade Down Pressure - Maximum GVW - - 29308 lb
    Moldboard - Blade Width - - 12 ft

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. - -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions
    Width All Wheel Drive (AWD) 99.3 in - -
    Length of Machine* 406.7 in 397.6 in -
    Maximum Height 132.4 in 132 in -
    Width 95.6 in 97.6 in -
    Note *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
    Basic Blade Width - 140 in -
    Height - Top of Cab - - 130 in
    Length - Counterweight to Ripper - - 399 in
    Width - Outside Front Tires - - 98.9 in
    Length - Front Axle to Mid Tandem - - 241 in
    Length - Front Tire to Rear of Machine - - 351 in
    Length - Front Axle to Moldboard - - 100 in
    Length - Between Tandem Axles - - 60 in
    Width - Outside Rear Tires - - 98.9 in
    Width - Tire Center Lines - - 84.3 in
    Height - Front Axle Center - - 23.5 in
    Height - Exhaust Stack - - 128 in
    Height - Top of Cylinders - - 120 in
    Ground Clearance - Rear Axle - - 13.3 in

    Blade Range
    Circle Center Shift Left 29.6 in - -
    Circle Center Shift Right 28.7 in - -
    Maximum Depth of Cut 28.1 in 28.9 in 28.1 in
    Maximum Lift Above Ground 18.7 in 18.9 in 18.9 in
    Maximum Shoulder Reach Left 74.3 in - -
    Maximum Shoulder Reach Right 71.3 in - -
    Moldboard Side Shift Left 25.6 in - -
    Moldboard Side Shift Right 20.7 in - -
    Blade Tip Range Backward 5 - -
    Blade Tip Range Forward 40 - -
    Circle Centershift - Right - - 28.7 in
    Circle Centershift - Left - - 27.4 in
    Moldboard Sideshift - Right - - 26 in
    Moldboard Sideshift - Left - - 20.1 in
    Maximum Blade Position Angle - - 90°
    Blade Tip Range - Forward - - 40°
    Blade Tip Range - Backward - - 5°
    Maximum Shoulder Reach Outside of Tires - Right - - 77.9 in
    Maximum Shoulder Reach Outside of Tires - Left - - 70.5 in

    Service Refill Capacities
    Fuel Tank 78 gal (US) - -
    Circle Drive with Slip Clutch 2 gal (US) - -
    Circle Drive without Slip Clutch 0.5 gal (US) - -
    Cooling System 40 l - -
    Engine Crankcase 5.5 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) - -
    Hydraulic System 11.9 gal (US) - -
    Transmission 4.8 gal (US) - -

    Weight
    Weight (Tier 4 Final)** 40488 lb - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - -
    All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - -
    Weight (Stage V)* 38912 lb - -

    Service Refill
    Hydraulic System - 14.5 gal (US) -
    Engine Crankcase - 7.9 gal (US) -
    Circle Drive - 1.8 gal (US) -
    Fuel Tank - 100 gal (US) -
    Front Wheel Spindle Bearing - Each - 0.13 gal (US) -
    Fuel Capacity - - 104 gal (US)
    Cooling System - - 15 gal (US)
    Hydraulic System - Total - - 26.4 gal (US)
    Hydraulic System - Tank - - 16.9 gal (US)
    Transmission - Differential - Final Drives - - 18.5 gal (US)
    Diesel Exhaust Fluid - - 5.8 gal (US)
    Engine Oil - - 7.9 gal (US)
    Tandem Housing - Each - - 20 gal (US)
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US)
    Circle Drive Housing - - 1.8 gal (US)

    Machine Weight
    Note - *Typically equipped with push block and ripper. -
    All-Wheel Drive (AWD) Weight - 44613 lb -
    Weight* - 42325 lb -

    Operating Specifications
    Top Speed - Forward - - 29 mile/h
    Top Speed - Reverse - - 23 mile/h
    Turning Radius - Outside Front Tires - - 25.59 ft
    Steering Range - Left/Right - - 50°
    Articulation Angle - Left/Right - - 20°
    Forward - 1st - - 2.5 mile/h
    Forward - 2nd - - 3.4 mile/h
    Forward - 3rd - - 5 mile/h
    Forward - 4th - - 6.9 mile/h
    Forward - 5th - - 10.6 mile/h
    Forward - 6th - - 14.5 mile/h
    Forward - 7th - - 19.9 mile/h
    Forward - 8th - - 29 mile/h
    Reverse - 1st - - 2 mile/h
    Reverse - 2nd - - 3.7 mile/h
    Reverse - 3rd - - 5.4 mile/h
    Reverse - 4th - - 8.4 mile/h
    Reverse - 5th - - 15.7 mile/h
    Reverse - 6th - - 23 mile/h

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse
    Transmission - - APECS, Direct Drive, Powershift
    Brakes - Service - - Multiple Oil Disc
    Brakes - Service - Surface Area - - 3565 in²
    Brakes - Parking - - Multiple Oil Disc
    Brakes - Secondary - - Dual Circuit

    Hydraulic System
    Circuit Type - - Parallel
    Pump Type - - Variable Piston
    Pump Output - - 55.7 gal/min
    Maximum System Pressure - - 3500 psi
    Reservoir Tank Capacity - - 16.9 gal (US)
    Standby Pressure - - 885 psi

    Frame
    Drawbar - Width - - 3 in
    Circle - Diameter - - 60.2 in
    Circle - Blade Beam Thickness - - 1.6 in
    Drawbar - Height - - 6 in
    Front Frame Structure - Width - - 12 in
    Front Frame Structure - Height - - 12.6 in
    Circle - Height - - 5.4 in
    Drawbar - Thickness - - 0.5 in
    Front-Top/Bottom Plate - Width - - 12 in
    Front-Top/Bottom Plate - Thickness - - 0.87 in
    Front Axle - Height to Center - - 23.5 in
    Front Axle - Wheel Lean - Left/Right - - 18°
    Front Axle - Total Oscillation per Side - - 32°

    Ripper
    Ripper Shank Holder Spacing - - 21 in
    Ripping Depth - Maximum - - 16.8 in
    Ripper Shank Holders - - 5
    Penetration Force - - 20812 lb
    Pry-Out Force - - 27794 lb
    Machine Length Increase, Beam Raised - - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in
    Rear - Scarifying Depth, Maximum - - 16.8 in
    Mid, V-Type - Working Width - - 46.6 in
    Front, V-Type - Working Width - - 47.4 in
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in
    Mid, V-Type - Scarifier Shank Holders - - 11
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in
    Rear - Working Width - - 84 in
    Rear - Scarifier Shank Holders - - 9
    Rear - Scarifier Shank Holder Spacing - - 10.5 in

    Standards
    Steering - - ISO 5010
    ROPS/FOPS - - ISO 3471/ISO 3449
    Brakes - - ISO 3450
    Sound - - ISO 6394; ISO 6395

    Tandems
    Height - - 19.9 in
    Width - - 7.9 in
    Sidewall Thickness - Inner - - 0.63 in
    Sidewall Thickness - Outer - - 0.71 in
    Drive Chain Pitch - - 2 in
    Wheel Axle Spacing - - 60 in
    Tandem Oscillation - Front Up - - 15°
    Tandem Oscillation - Front Down - - 25°
    Add a Similar Product: