CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 GC Motor Grader
    View Product
    160 Motor Grader
    View Product Remove
    24 Motor Grader
    View Product Remove
    140 Motor Grader LVR
    View Product Remove

    Engine
    Engine Power (ISO 14396) 196 HP - - -
    Bore 4.1 in 4.5 in 5.4 in 4.5 in
    Derating Altitude 9842 ft 10000 ft - -
    Displacement 427.8 in³ 567.5 in³ 1648 in³ 567.5 in³
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat 7.1 Cat® C9.3 Cat C27 Cat C9.3
    Engine RPM 2,200 - - 2,000
    Standard Capability 109 °F 109 °F 122 °F 109 °F
    High - Ambient Capability 122 °F 122 °F - -
    Maximum Torque - ISO 9249 616 lb/ft - - -
    Stroke 5.3 in 5.9 in 6 in 5.9 in
    Torque Rise - ISO 9294 40% - - 44%
    Number of Cylinders 6 6 12 6
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Optimized VHP Plus is standard for the 24. -
    Note (3) Power as declared per ISO 14396 - Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Engine Power AWD (ISO 14396) 196 HP - - -
    Base Power (1st Gear) - Net - 221 HP - -
    Speed at Rated Power - 2,000 rpm - -
    VHP Plus - Gear - Net Power - Forward 1st - 221 HP - -
    Torque Rise - 39% - -
    VHP Plus - Gear - Net Power - Forward 8th - 272 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd - 241 HP - -
    VHP Plus - Gear - Net Power - Forward 4th - 252 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd - 231 HP - -
    VHP Plus - Gear - Net Power - Forward 6th - 262 HP - -
    Maximum Torque - VHP Plus - 1000 lb/ft - -
    VHP Plus Range - Net - 165-203 kW (221-272 hp) - -
    VHP Plus - Gear - Net Power - Forward 7th - 267 HP - -
    VHP Plus - Gear - Net Power - Reverse 1st - 221 HP - -
    Base Power (1st Gear) - Net - Metric - 224 HP - -
    High Ambient - Fan Speed - Standard - 1,400 rpm - -
    VHP Plus - Gear - Net Power - Forward 5th - 257 HP - -
    VHP Plus - Gear - Net Power - Reverse 2nd - 231 HP - -
    VHP Plus Range - Net - Metric - 165-203 kW (224-276 hp) - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 241 HP - -
    High Ambient - Fan Speed - Maximum - 1,550 rpm - -
    High Ambient - Fan Speed - Minimum - 500 rpm - -
    Net Power - EEC 80/1269 - - 535 HP 250 HP
    Note (4) - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) -
    Net Power - ISO 9249/SAE J1349 - - - 250 HP

    Weights
    Operating Weight - Typically Equipped 38912 lb 45547 lb 165314 lb 20236 lb
    Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - - -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb - -
    Gross Vehicle Weight - Base - Front Axle - 9907 lb - -
    Gross Vehicle Weight - Base - Rear Axle - 28812 lb - -
    Gross Vehicle Weight - Maximum - Total - 55144 lb - -
    Operating Weight - Typically Equipped - Front Axle - 13237 lb - -
    Gross Vehicle Weight - Base - Total - 38719 lb - -
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb - -
    Operating Weight - Typically Equipped - Total - 45547 lb - -
    Operating Weight - Typically Equipped - Rear Axle - 32310 lb - -

    Moldboard
    Blade Width 12 ft 14 ft 24 ft 12 ft
    Arc Radius 16.3 in 16.3 in - 16.3 in
    Blade Height 24 in - 40 in -
    Cutting Edge Width 6 in 6 in - -
    End Bit 6 in - - 6 in
    Throat Clearance 4.4 in 6.5 in - 6.5 in
    Moldboard - Height - 24 in - -
    Moldboard - Thickness - 0.87 in - -
    Cutting Edge Thickness - 0.6 in - -
    End Bit - Width - 6 in - -
    End Bit - Thickness - 0.6 in - -
    Blade Pull - Base GVW - 25931 lb - -
    Blade Pull - Maximum GVW - 34262 lb - -
    Blade Down Pressure - Base GVW - 17004 lb - -
    Blade Down Pressure - Maximum GVW - 29308 lb - -
    Moldboard - Blade Width - 14 ft - -
    Cutting Edge - - - 6 in

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. - - -
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -

    Dimensions
    Width All Wheel Drive (AWD) 99.3 in - - -
    Length of Machine* 406.7 in - - 397.6 in
    Maximum Height 132.4 in - - 132 in
    Width 95.6 in - - 97.6 in
    Note *Typically equipped with push block and ripper. - - *Typically equipped with push block and ripper.
    Height - Top of Cab - 130 in - -
    Length - Counterweight to Ripper - 399 in - -
    Width - Outside Front Tires - 98.9 in - -
    Length - Front Axle to Mid Tandem - 241 in - -
    Length - Front Tire to Rear of Machine - 351 in - -
    Length - Front Axle to Moldboard - 100 in - -
    Length - Between Tandem Axles - 60 in - -
    Width - Outside Rear Tires - 98.9 in - -
    Width - Tire Center Lines - 84.3 in - -
    Height - Front Axle Center - 23.5 in - -
    Height - Exhaust Stack - 128 in - -
    Height - Top of Cylinders - 120 in - -
    Ground Clearance - Rear Axle - 13.3 in - -
    Basic Blade Width - - - 140 in

    Blade Range
    Circle Center Shift Left 29.6 in - - -
    Circle Center Shift Right 28.7 in - - -
    Maximum Depth of Cut 28.1 in 29.5 in 21.7 in 28.9 in
    Maximum Lift Above Ground 18.7 in 17.8 in 16.1 in 18.9 in
    Maximum Shoulder Reach Left 74.3 in - - -
    Maximum Shoulder Reach Right 71.3 in - - -
    Moldboard Side Shift Left 25.6 in - - -
    Moldboard Side Shift Right 20.7 in - - -
    Blade Tip Range Backward 5 - - -
    Blade Tip Range Forward 40 - - -
    Circle Centershift - Right - 28.7 in - -
    Circle Centershift - Left - 27.4 in - -
    Moldboard Sideshift - Right - 26 in - -
    Moldboard Sideshift - Left - 20.1 in - -
    Maximum Blade Position Angle - 90° - -
    Blade Tip Range - Forward - 40° - -
    Blade Tip Range - Backward - 5° - -
    Maximum Shoulder Reach Outside of Tires - Left - 82.3 in - -
    Maximum Shoulder Reach Outside of Tires - Right - 89.7 in - -

    Service Refill Capacities
    Fuel Tank 78 gal (US) - - -
    Circle Drive with Slip Clutch 2 gal (US) - - -
    Circle Drive without Slip Clutch 0.5 gal (US) - - -
    Cooling System 40 l - - -
    Engine Crankcase 5.5 gal (US) - - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) - - -
    Hydraulic System 11.9 gal (US) - - -
    Transmission 4.8 gal (US) - - -

    Weight
    Weight (Tier 4 Final)** 40488 lb - - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - - -
    All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - - -
    Weight (Stage V)* 38912 lb - - -

    Operating Specifications
    Top Speed - Forward - 29.5 mile/h - -
    Top Speed - Reverse - 23.3 mile/h - -
    Turning Radius - Outside Front Tires - 25.59 ft - -
    Steering Range - Left/Right - 50° - -
    Articulation Angle - Left/Right - 20° - -
    Forward - 1st - 2.6 mile/h - -
    Forward - 2nd - 3.5 mile/h - -
    Forward - 3rd - 5.1 mile/h - -
    Forward - 4th - 7 mile/h - -
    Forward - 5th - 10.8 mile/h - -
    Forward - 6th - 14.7 mile/h - -
    Forward - 7th - 20.3 mile/h - -
    Forward - 8th - 29.5 mile/h - -
    Reverse - 1st - 2 mile/h - -
    Reverse - 2nd - 3.8 mile/h - -
    Reverse - 3rd - 5.5 mile/h - -
    Reverse - 4th - 8.5 mile/h - -
    Reverse - 5th - 16 mile/h - -
    Reverse - 6th - 23.3 mile/h - -

    Service Refill
    Fuel Capacity - 104 gal (US) - -
    Cooling System - 15 gal (US) - -
    Hydraulic System - Total - 26.4 gal (US) - -
    Hydraulic System - Tank - 16.9 gal (US) - -
    Transmission - Differential - Final Drives - 18.5 gal (US) - -
    Diesel Exhaust Fluid - 5.8 gal (US) - -
    Engine Oil - 7.9 gal (US) - -
    Tandem Housing - Each - 22.9 gal (US) - -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) - -
    Circle Drive Housing - 1.8 gal (US) - -
    Hydraulic System - - - 14.5 gal (US)
    Engine Crankcase - - - 7.9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 100 gal (US)
    Front Wheel Spindle Bearing - Each - - - 0.13 gal (US)

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse - -
    Transmission - APECS, Direct Drive, Powershift - -
    Brakes - Service - Multiple Oil Disc - -
    Brakes - Service - Surface Area - 3565 in² - -
    Brakes - Parking - Multiple Oil Disc - -
    Brakes - Secondary - Dual Circuit Control - -

    Hydraulic System
    Circuit Type - Parallel - -
    Pump Type - Variable Piston - -
    Pump Output - 55.5 gal/min - -
    Maximum System Pressure - 3503 psi - -
    Reservoir Tank Capacity - 16.9 gal (US) - -
    Standby Pressure - 885 psi - -

    Frame
    Drawbar - Width - 3 in - -
    Circle - Diameter - 61.1 in - -
    Circle - Blade Beam Thickness - 1.6 in - -
    Drawbar - Height - 6 in - -
    Front Frame Structure - Width - 12 in - -
    Circle - Height - 6.3 in - -
    Front Frame Structure - Height - 12.6 in - -
    Drawbar - Thickness - 0.5 in - -
    Front-Top/Bottom Plate - Width - 12 in - -
    Front-Top/Bottom Plate - Thickness - 0.87 in - -
    Front Axle - Height to Center - 23.5 in - -
    Front Axle - Wheel Lean - Left/Right - 18° - -
    Front Axle - Total Oscillation per Side - 32° - -

    Ripper
    Ripping Depth - Maximum - 16.8 in - -
    Ripper Shank Holder Spacing - 21 in - -
    Ripper Shank Holders - 5 - -
    Penetration Force - 20812 lb - -
    Pry-Out Force - 28493 lb - -
    Machine Length Increase, Beam Raised - 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in - -
    Mid, V-Type - Working Width - 46.6 in - -
    Rear - Scarifying Depth, Maximum - 16.8 in - -
    Front, V-Type - Working Width - 47.4 in - -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 5/11 - -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in - -
    Mid, V-Type - Scarifier Shank Holders - 11 - -
    Rear - Working Width - 84 in - -
    Rear - Scarifier Shank Holders - 9 - -
    Rear - Scarifier Shank Holder Spacing - 10.5 in - -

    Standards
    Brakes - ISO 3450 - -
    ROPS/FOPS - ISO 3471; ISO 3449 - -
    Steering - ISO 5010 - -
    Sound - ISO 6394; ISO 6395 - -

    Tandems
    Height - 22.5 in - -
    Width - 8 in - -
    Sidewall Thickness - Inner - 0.69 in - -
    Sidewall Thickness - Outer - 0.71 in - -
    Drive Chain Pitch - 2 in - -
    Wheel Axle Spacing - 60 in - -
    Tandem Oscillation - Front Up - 15° - -
    Tandem Oscillation - Front Down - 25° - -

    Machine Weight
    Weight* - - 161695 lb 42325 lb
    Note - - - *Typically equipped with push block and ripper.
    All-Wheel Drive (AWD) Weight - - - 44613 lb
    Add a Similar Product: