CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    150 Motor Grader
    View Product Remove
    120 GC
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - -
    Net Power - ISO 9249/SAE J1349 250 HP - 171 HP
    Standard Capability 109 °F 109 °F -
    Engine RPM 2,000 - -
    Engine Model Cat C9.3 Cat® C9.3 Cat® C4.4
    Bore 4.5 in 4.5 in 4.1 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards
    Displacement 567.5 in³ 567.5 in³ 268.5 in³
    Stroke 5.9 in 5.9 in 5 in
    Number of Cylinders 6 6 -
    Torque Rise - ISO 9294 44% - 21%
    Net Power Range (Tier 4) - 200 HP -
    Speed at Rated Power - 2,000 rpm -
    Maximum Torque - VHP Plus - 920 lb/ft -
    High Ambient - Fan Speed - Standard - 1,400 rpm -
    VHP Plus Range - Net - Metric - 149-188 kW (202-255 hp) -
    VHP Plus Range - Net - 149-188 kW (200-252 hp) -
    Torque Rise - 39% -
    VHP Plus - Gear - Net Power - Reverse 1st - 200 HP -
    VHP Plus - Gear - Net Power - Forward 1st - 200 HP -
    VHP Plus - Gear - Net Power - Forward 8th - 252 HP -
    VHP Plus - Gear - Net Power - Forward 6th - 241 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - 210 HP -
    VHP Plus - Gear - Net Power - Forward 7th - 247 HP -
    VHP Plus - Gear - Net Power - Forward 5th - 236 HP -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 220 HP -
    VHP Plus - Gear - Net Power - Forward 4th - 231 HP -
    Base Power (1st Gear) - Net - Metric - 202 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd - 210 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - 220 HP -
    Derating Altitude - 10000 ft 9842 ft
    High Ambient - Fan Speed - Maximum - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - 500 rpm -
    High - Ambient Capability - 122 °F -
    Maximum Torque - - 544 lb/ft
    Engine Power AWD (ISO 14396) - - 128 kW
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner,

    Weights
    Operating Weight - Typically Equipped 20236 lb 43950 lb 14496 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle - 12549 lb -
    Operating Weight - Typically Equipped - Rear Axle - 31401 lb -
    Gross Vehicle Weight - Base - Front Axle - 9601 lb -
    Gross Vehicle Weight - Base - Rear Axle - 28590 lb -
    Gross Vehicle Weight - Maximum - Total - 55144 lb -
    Operating Weight - Typically Equipped - Total - 43950 lb -
    Gross Vehicle Weight - Base - Total - 38191 lb -

    Moldboard
    Blade Width 12 ft 12 ft 12 ft
    Cutting Edge 6 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 4.7 in
    End Bit 6 in - -
    Moldboard - Height - 24 in -
    Moldboard - Thickness - 0.87 in -
    Cutting Edge Width - 6 in 6 in
    Cutting Edge Thickness - 0.6 in -
    End Bit - Width - 6 in 152 in
    End Bit - Thickness - 0.6 in -
    Blade Pull - Base GVW - 25732 lb -
    Blade Pull - Maximum GVW - 34262 lb -
    Blade Down Pressure - Base GVW - 16480 lb -
    Blade Down Pressure - Maximum GVW - 29308 lb -
    Moldboard - Blade Width - 12 ft -
    Blade Height - - 20 in

    Dimensions
    Basic Blade Width 140 in - -
    Length of Machine* 397.6 in - 391.4 in
    Width 97.6 in - 94.6 in
    Note *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper.
    Maximum Height 132 in - 149.1 in
    Height - Top of Cab - 130 in -
    Length - Counterweight to Ripper - 399 in -
    Width - Outside Front Tires - 98.9 in -
    Length - Front Axle to Mid Tandem - 241 in -
    Length - Front Tire to Rear of Machine - 351 in -
    Length - Front Axle to Moldboard - 100 in -
    Length - Between Tandem Axles - 60 in -
    Width - Outside Rear Tires - 98.9 in -
    Width - Tire Center Lines - 84.3 in -
    Height - Front Axle Center - 23.5 in -
    Height - Exhaust Stack - 128 in -
    Height - Top of Cylinders - 120 in -
    Ground Clearance - Rear Axle - 13.3 in -

    Service Refill
    Hydraulic System 14.5 gal (US) - -
    Engine Crankcase 7.9 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Fuel Tank 100 gal (US) - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - -
    Fuel Capacity - 104 gal (US) -
    Cooling System - 15 gal (US) -
    Hydraulic System - Total - 26.4 gal (US) -
    Hydraulic System - Tank - 16.9 gal (US) -
    Transmission - Differential - Final Drives - 18.5 gal (US) -
    Diesel Exhaust Fluid - 5.8 gal (US) -
    Engine Oil - 7.9 gal (US) -
    Tandem Housing - Each - 20 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) -
    Circle Drive Housing - 1.8 gal (US) -

    Machine Weight
    Note *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight 44613 lb - 36376 lb
    Weight* 42325 lb - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 18.9 in 16.1 in
    Maximum Depth of Cut 28.9 in 28.1 in 30.5 in
    Circle Centershift - Right - 28.7 in 25.8 in
    Circle Centershift - Left - 27.4 in 25.8 in
    Moldboard Sideshift - Right - 26 in 26.1 in
    Moldboard Sideshift - Left - 20.1 in 20.2 in
    Maximum Blade Position Angle - 90° -
    Blade Tip Range - Forward - 40° 40°
    Blade Tip Range - Backward - 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right - 77.9 in -
    Maximum Shoulder Reach Outside of Tires - Left - 70.5 in -

    Operating Specifications
    Top Speed - Forward - 29 mile/h -
    Top Speed - Reverse - 23 mile/h -
    Turning Radius - Outside Front Tires - 25.59 ft -
    Steering Range - Left/Right - 50° -
    Articulation Angle - Left/Right - 20° -
    Forward - 1st - 2.5 mile/h -
    Forward - 2nd - 3.4 mile/h -
    Forward - 3rd - 5 mile/h -
    Forward - 4th - 6.9 mile/h -
    Forward - 5th - 10.6 mile/h -
    Forward - 6th - 14.5 mile/h -
    Forward - 7th - 19.9 mile/h -
    Forward - 8th - 29 mile/h -
    Reverse - 1st - 2 mile/h -
    Reverse - 2nd - 3.7 mile/h -
    Reverse - 3rd - 5.4 mile/h -
    Reverse - 4th - 8.4 mile/h -
    Reverse - 5th - 15.7 mile/h -
    Reverse - 6th - 23 mile/h -

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse -
    Transmission - APECS, Direct Drive, Powershift -
    Brakes - Service - Multiple Oil Disc -
    Brakes - Service - Surface Area - 3565 in² -
    Brakes - Parking - Multiple Oil Disc -
    Brakes - Secondary - Dual Circuit -

    Hydraulic System
    Circuit Type - Parallel -
    Pump Type - Variable Piston -
    Pump Output - 55.7 gal/min -
    Maximum System Pressure - 3500 psi -
    Reservoir Tank Capacity - 16.9 gal (US) -
    Standby Pressure - 885 psi -

    Frame
    Drawbar - Width - 3 in -
    Circle - Diameter - 60.2 in -
    Circle - Blade Beam Thickness - 1.6 in -
    Drawbar - Height - 6 in -
    Front Frame Structure - Width - 12 in -
    Front Frame Structure - Height - 12.6 in -
    Circle - Height - 5.4 in -
    Drawbar - Thickness - 0.5 in -
    Front-Top/Bottom Plate - Width - 12 in -
    Front-Top/Bottom Plate - Thickness - 0.87 in -
    Front Axle - Height to Center - 23.5 in -
    Front Axle - Wheel Lean - Left/Right - 18° -
    Front Axle - Total Oscillation per Side - 32° -

    Ripper
    Ripper Shank Holder Spacing - 21 in -
    Ripping Depth - Maximum - 16.8 in -
    Ripper Shank Holders - 5 -
    Penetration Force - 20812 lb -
    Pry-Out Force - 27794 lb -
    Machine Length Increase, Beam Raised - 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in -
    Rear - Scarifying Depth, Maximum - 16.8 in -
    Mid, V-Type - Working Width - 46.6 in -
    Front, V-Type - Working Width - 47.4 in -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in -
    Mid, V-Type - Scarifier Shank Holders - 11 -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in -
    Rear - Working Width - 84 in -
    Rear - Scarifier Shank Holders - 9 -
    Rear - Scarifier Shank Holder Spacing - 10.5 in -

    Standards
    Steering - ISO 5010 -
    ROPS/FOPS - ISO 3471/ISO 3449 -
    Brakes - ISO 3450 -
    Sound - ISO 6394; ISO 6395 -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Tandems
    Height - 19.9 in -
    Width - 7.9 in -
    Sidewall Thickness - Inner - 0.63 in -
    Sidewall Thickness - Outer - 0.71 in -
    Drive Chain Pitch - 2 in -
    Wheel Axle Spacing - 60 in -
    Tandem Oscillation - Front Up - 15° -
    Tandem Oscillation - Front Down - 25° -

    Service Refill Capacities
    Cooling System - - 10.3 gal (US)
    Circle Drive without Slip Clutch - - 0.4 gal (US)
    Hydraulic System - - 14.5 gal (US)
    Circle Drive with Slip Clutch - - 1.8 gal (US)
    Transmission - - 4.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 3.2 gal (US)
    Fuel Tank - - 71 gal (US)
    Engine Crankcase - - 2 gal (US)

    Sustainability
    Recyclability - - 92%
    Add a Similar Product: