CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    160 Motor Grader
    View Product Remove
    24 Motor Grader
    View Product Remove
    140/140 AWD Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - 535 HP -
    Net Power - ISO 9249/SAE J1349 250 HP - - -
    Standard Capability 109 °F 109 °F 122 °F 109 °F
    Engine RPM 2,000 - - -
    Engine Model Cat C9.3 Cat® C9.3 Cat C27 Cat® C9.3
    Bore 4.5 in 4.5 in 5.4 in 4.5 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V
    Displacement 567.5 in³ 567.5 in³ 1648 in³ 567.5 in³
    Stroke 5.9 in 5.9 in 6 in 5.9 in
    Number of Cylinders 6 6 12 6
    Torque Rise - ISO 9294 44% - - -
    Base Power (1st Gear) - Net - 221 HP - -
    Speed at Rated Power - 2,000 rpm - 2,000 rpm
    VHP Plus - Gear - Net Power - Forward 1st - 221 HP - 179 HP
    Torque Rise - 39% - 38%
    VHP Plus - Gear - Net Power - Forward 8th - 272 HP - 231 HP
    VHP Plus - Gear - Net Power - Forward 3rd - 241 HP - 200 HP
    VHP Plus - Gear - Net Power - Forward 4th - 252 HP - 210 HP
    VHP Plus - Gear - Net Power - Forward 2nd - 231 HP - 189 HP
    VHP Plus - Gear - Net Power - Forward 6th - 262 HP - 220 HP
    Maximum Torque - VHP Plus - 1000 lb/ft - 840 lb/ft
    VHP Plus Range - Net - 165-203 kW (221-272 hp) - 133-172 kW (179-231 hp)
    VHP Plus - Gear - Net Power - Forward 7th - 267 HP - 225 HP
    VHP Plus - Gear - Net Power - Reverse 1st - 221 HP - 179 HP
    Base Power (1st Gear) - Net - Metric - 224 HP - 181 HP
    High Ambient - Fan Speed - Standard - 1,400 rpm - 1,400 rpm
    VHP Plus - Gear - Net Power - Forward 5th - 257 HP - 215 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - 231 HP - 189 HP
    VHP Plus Range - Net - Metric - 165-203 kW (224-276 hp) - 133-172 kW (181-234 hp)
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 241 HP - 200 HP
    Derating Altitude - 10000 ft - 10000 ft
    High Ambient - Fan Speed - Maximum - 1,550 rpm - 1,550 rpm
    High Ambient - Fan Speed - Minimum - 500 rpm - 500 rpm
    High - Ambient Capability - 122 °F - 122 °F
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Note (3) - - Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) - - Optimized VHP Plus is standard for the 24. -
    Note (4) - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) -
    Net Power Range (Tier 4) - - - 179 HP

    Weights
    Operating Weight - Typically Equipped 20236 lb 45547 lb 165314 lb 42647 lb
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb - 38069 lb
    Gross Vehicle Weight - Base - Front Axle - 9907 lb - 9343 lb
    Gross Vehicle Weight - Base - Rear Axle - 28812 lb - 28077 lb
    Gross Vehicle Weight - Maximum - Total - 55144 lb - 55144 lb
    Operating Weight - Typically Equipped - Front Axle - 13237 lb - 12055 lb
    Gross Vehicle Weight - Base - Total - 38719 lb - 37420 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb - 17075 lb
    Operating Weight - Typically Equipped - Total - 45547 lb - 42647 lb
    Operating Weight - Typically Equipped - Rear Axle - 32310 lb - 30592 lb

    Moldboard
    Blade Width 12 ft 14 ft 24 ft 12 ft
    Cutting Edge 6 in - - -
    Arc Radius 16.3 in 16.3 in - 16.3 in
    Throat Clearance 6.5 in 6.5 in - 6.5 in
    End Bit 6 in - - -
    Moldboard - Height - 24 in - 24 in
    Moldboard - Thickness - 0.87 in - 0.87 in
    Cutting Edge Width - 6 in - 6 in
    Cutting Edge Thickness - 0.6 in - 0.6 in
    End Bit - Width - 6 in - 6 in
    End Bit - Thickness - 0.6 in - 0.6 in
    Blade Pull - Base GVW - 25931 lb - 25269 lb
    Blade Pull - Maximum GVW - 34262 lb - 34262 lb
    Blade Down Pressure - Base GVW - 17004 lb - 16038 lb
    Blade Down Pressure - Maximum GVW - 29308 lb - 29309 lb
    Moldboard - Blade Width - 14 ft - 12 ft
    Blade Height - - 40 in -

    Dimensions
    Basic Blade Width 140 in - - -
    Length of Machine* 397.6 in - - -
    Width 97.6 in - - -
    Note *Typically equipped with push block and ripper. - - -
    Maximum Height 132 in - - -
    Height - Top of Cab - 130 in - 130 in
    Length - Counterweight to Ripper - 399 in - 399 in
    Width - Outside Front Tires - 98.9 in - 98.9 in
    Length - Front Axle to Mid Tandem - 241 in - 241 in
    Length - Front Tire to Rear of Machine - 351 in - 351 in
    Length - Front Axle to Moldboard - 100 in - 100 in
    Length - Between Tandem Axles - 60 in - 60 in
    Width - Outside Rear Tires - 98.9 in - 98.9 in
    Width - Tire Center Lines - 84.3 in - 84.3 in
    Height - Front Axle Center - 23.5 in - 23.5 in
    Height - Exhaust Stack - 128 in - 128 in
    Height - Top of Cylinders - 120 in - 120 in
    Ground Clearance - Rear Axle - 13.3 in - 13.3 in

    Service Refill
    Hydraulic System 14.5 gal (US) - - -
    Engine Crankcase 7.9 gal (US) - - -
    Circle Drive 1.8 gal (US) - - -
    Fuel Tank 100 gal (US) - - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - - -
    Fuel Capacity - 104 gal (US) - 104 gal (US)
    Cooling System - 15 gal (US) - 15 gal (US)
    Hydraulic System - Total - 26.4 gal (US) - 26.4 gal (US)
    Hydraulic System - Tank - 16.9 gal (US) - 16.9 gal (US)
    Transmission - Differential - Final Drives - 18.5 gal (US) - 18.5 gal (US)
    Diesel Exhaust Fluid - 5.8 gal (US) - 5.8 gal (US)
    Engine Oil - 7.9 gal (US) - 7.9 gal (US)
    Tandem Housing - Each - 22.9 gal (US) - 20 gal (US)
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) - 0.13 gal (US)
    Circle Drive Housing - 1.8 gal (US) - 1.8 gal (US)

    Machine Weight
    Note *Typically equipped with push block and ripper. - - -
    All-Wheel Drive (AWD) Weight 44613 lb - - -
    Weight* 42325 lb - 161695 lb -

    Blade Range
    Maximum Lift Above Ground 18.9 in 17.8 in 16.1 in 18.9 in
    Maximum Depth of Cut 28.9 in 29.5 in 21.7 in 28.1 in
    Circle Centershift - Right - 28.7 in - 28.7 in
    Circle Centershift - Left - 27.4 in - 27.4 in
    Moldboard Sideshift - Right - 26 in - 26 in
    Moldboard Sideshift - Left - 20.1 in - 20.1 in
    Maximum Blade Position Angle - 90° - 90°
    Blade Tip Range - Forward - 40° - 40°
    Blade Tip Range - Backward - 5° - 5°
    Maximum Shoulder Reach Outside of Tires - Left - 82.3 in - 70.5 in
    Maximum Shoulder Reach Outside of Tires - Right - 89.7 in - 77.9 in

    Operating Specifications
    Top Speed - Forward - 29.5 mile/h - 29 mile/h
    Top Speed - Reverse - 23.3 mile/h - 23 mile/h
    Turning Radius - Outside Front Tires - 25.59 ft - 25.59 ft
    Steering Range - Left/Right - 50° - 50°
    Articulation Angle - Left/Right - 20° - 20°
    Forward - 1st - 2.6 mile/h - 2.5 mile/h
    Forward - 2nd - 3.5 mile/h - 3.4 mile/h
    Forward - 3rd - 5.1 mile/h - 5 mile/h
    Forward - 4th - 7 mile/h - 6.9 mile/h
    Forward - 5th - 10.8 mile/h - 10.6 mile/h
    Forward - 6th - 14.7 mile/h - 14.5 mile/h
    Forward - 7th - 20.3 mile/h - 19.9 mile/h
    Forward - 8th - 29.5 mile/h - 29 mile/h
    Reverse - 1st - 2 mile/h - 2 mile/h
    Reverse - 2nd - 3.8 mile/h - 3.7 mile/h
    Reverse - 3rd - 5.5 mile/h - 5.4 mile/h
    Reverse - 4th - 8.5 mile/h - 8.4 mile/h
    Reverse - 5th - 16 mile/h - 15.7 mile/h
    Reverse - 6th - 23.3 mile/h - 23 mile/h

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse - 8 Forward/6 Reverse
    Transmission - APECS, Direct Drive, Powershift - APECS, Direct Drive, Powershift
    Brakes - Service - Multiple Oil Disc - Multiple Oil Disc
    Brakes - Service - Surface Area - 3565 in² - 3565 in²
    Brakes - Parking - Multiple Oil Disc - Multiple Oil Disc
    Brakes - Secondary - Dual Circuit Control - Dual Circuit

    Hydraulic System
    Circuit Type - Parallel - Parallel
    Pump Type - Variable Piston - Variable Piston
    Pump Output - 55.5 gal/min - 55.7 gal/min
    Maximum System Pressure - 3503 psi - 3500 psi
    Reservoir Tank Capacity - 16.9 gal (US) - 16.9 gal (US)
    Standby Pressure - 885 psi - 885 psi

    Frame
    Drawbar - Width - 3 in - 3 in
    Circle - Diameter - 61.1 in - 60.2 in
    Circle - Blade Beam Thickness - 1.6 in - 1.6 in
    Drawbar - Height - 6 in - 6 in
    Front Frame Structure - Width - 12 in - 12 in
    Circle - Height - 6.3 in - 5.4 in
    Front Frame Structure - Height - 12.6 in - 12.6 in
    Drawbar - Thickness - 0.5 in - 0.5 in
    Front-Top/Bottom Plate - Width - 12 in - 12 in
    Front-Top/Bottom Plate - Thickness - 0.87 in - 0.87 in
    Front Axle - Height to Center - 23.5 in - 23.5 in
    Front Axle - Wheel Lean - Left/Right - 18° - 18°
    Front Axle - Total Oscillation per Side - 32° - 32°

    Ripper
    Ripping Depth - Maximum - 16.8 in - 16.8 in
    Ripper Shank Holder Spacing - 21 in - 21 in
    Ripper Shank Holders - 5 - 5
    Penetration Force - 20812 lb - 20812 lb
    Pry-Out Force - 28493 lb - 27794 lb
    Machine Length Increase, Beam Raised - 40.6 in - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in - 18.4 in
    Mid, V-Type - Working Width - 46.6 in - 46.6 in
    Rear - Scarifying Depth, Maximum - 16.8 in - 16.8 in
    Front, V-Type - Working Width - 47.4 in - 47.4 in
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in - 4.6 in
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in - 11.5 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 5/11 - 11-May
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in - 40.6 in
    Mid, V-Type - Scarifier Shank Holders - 11 - 11
    Rear - Working Width - 84 in - 84 in
    Rear - Scarifier Shank Holders - 9 - 9
    Rear - Scarifier Shank Holder Spacing - 10.5 in - 10.5 in

    Standards
    Brakes - ISO 3450 - ISO 3450
    ROPS/FOPS - ISO 3471; ISO 3449 - ISO 3471/ISO 3449
    Steering - ISO 5010 - ISO 5010
    Sound - ISO 6394; ISO 6395 - ISO 6394; ISO 6395

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -

    Tandems
    Height - 22.5 in - 19.9 in
    Width - 8 in - 7.9 in
    Sidewall Thickness - Inner - 0.69 in - 0.63 in
    Sidewall Thickness - Outer - 0.71 in - 0.71 in
    Drive Chain Pitch - 2 in - 2 in
    Wheel Axle Spacing - 60 in - 60 in
    Tandem Oscillation - Front Up - 15° - 15°
    Tandem Oscillation - Front Down - 25° - 25°
    Add a Similar Product: