CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    18 Motor Grader
    View Product Remove
    150 Motor Grader
    View Product Remove
    140 GC Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - - -
    Net Power - ISO 9249/SAE J1349 250 HP - - -
    Standard Capability 109 °F - 109 °F 109 °F
    Engine RPM 2,000 - - 2,200
    Engine Model Cat C9.3 Cat® C13 Cat® C9.3 Cat 7.1
    Bore 4.5 in 5.1 in 4.5 in 4.1 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Displacement 567.5 in³ 763 in³ 567.5 in³ 427.8 in³
    Stroke 5.9 in 6.2 in 5.9 in 5.3 in
    Number of Cylinders 6 6 6 6
    Torque Rise - ISO 9294 44% - - 40%
    Base Power (1st Gear) - Net - 304 HP - -
    Speed at Rated Power - 2,000 rpm 2,000 rpm -
    Standard - Ambient Capability - 122 °F - -
    Base Power (1st Gear) - Net - Metric - 309 HP 202 HP -
    VHP Range - Net - 227-266 kW (304-357 hp) - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft - -
    Standard - Fan Speed - Minimum - 550 rpm - -
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 40% - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 1306 lb/ft - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 12500 ft - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 38% - -
    Standard - Fan Speed - Maximum - 1,450 rpm - -
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 38% - -
    VHP Range - Net - Metric - 227-266 kW (309-362 hp) - -
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - -
    Optimized VHP Range - Net - 227-266 kW (304-357 hp) - -
    Net Power Range (Tier 4) - - 200 HP -
    Maximum Torque - VHP Plus - - 920 lb/ft -
    High Ambient - Fan Speed - Standard - - 1,400 rpm -
    VHP Plus Range - Net - Metric - - 149-188 kW (202-255 hp) -
    VHP Plus Range - Net - - 149-188 kW (200-252 hp) -
    Torque Rise - - 39% -
    VHP Plus - Gear - Net Power - Reverse 1st - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 1st - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 8th - - 252 HP -
    VHP Plus - Gear - Net Power - Forward 6th - - 241 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - - 210 HP -
    VHP Plus - Gear - Net Power - Forward 7th - - 247 HP -
    VHP Plus - Gear - Net Power - Forward 5th - - 236 HP -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 220 HP -
    VHP Plus - Gear - Net Power - Forward 4th - - 231 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd - - 210 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - - 220 HP -
    Derating Altitude - - 10000 ft 9842 ft
    High Ambient - Fan Speed - Maximum - - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - - 500 rpm -
    High - Ambient Capability - - 122 °F 122 °F
    Engine Power (ISO 14396) - - - 196 HP
    Maximum Torque - ISO 9249 - - - 616 lb/ft
    Note (1) - - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
    Note (2) - - - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (3) - - - Power as declared per ISO 14396
    Engine Power AWD (ISO 14396) - - - 196 HP

    Weights
    Operating Weight - Typically Equipped 20236 lb 74324 lb 43950 lb 38912 lb
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle - - 12549 lb -
    Operating Weight - Typically Equipped - Rear Axle - - 31401 lb -
    Gross Vehicle Weight - Base - Front Axle - - 9601 lb -
    Gross Vehicle Weight - Base - Rear Axle - - 28590 lb -
    Gross Vehicle Weight - Maximum - Total - - 55144 lb -
    Operating Weight - Typically Equipped - Total - - 43950 lb -
    Gross Vehicle Weight - Base - Total - - 38191 lb -
    Note - - - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

    Moldboard
    Blade Width 12 ft 18 ft 12 ft 12 ft
    Cutting Edge 6 in - - -
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 5 in 6.5 in 4.4 in
    End Bit 6 in - - 6 in
    Down Force - Maximum GVW - 43861 lb - -
    Blade Pull* - Base GVW - 47216 lb - -
    Blade Pull* - Maximum GVW - 52878 lb - -
    End Bit - Width - 6 in 6 in -
    Down Force - Base GVW - 34008 lb - -
    Cutting Edge Thickness - 1.4 in 0.6 in -
    Thickness - 1 in - -
    Width - 18 ft - -
    Cutting Edge Width - 10 in 6 in 6 in
    End Bit - Thickness - 0.75 in 0.6 in -
    Height - 31 in - -
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - -
    Moldboard - Height - - 24 in -
    Moldboard - Thickness - - 0.87 in -
    Blade Pull - Base GVW - - 25732 lb -
    Blade Pull - Maximum GVW - - 34262 lb -
    Blade Down Pressure - Base GVW - - 16480 lb -
    Blade Down Pressure - Maximum GVW - - 29308 lb -
    Moldboard - Blade Width - - 12 ft -
    Blade Height - - - 24 in

    Dimensions
    Basic Blade Width 140 in - - -
    Length of Machine* 397.6 in - - 406.7 in
    Width 97.6 in - - 95.6 in
    Note *Typically equipped with push block and ripper. - - *Typically equipped with push block and ripper.
    Maximum Height 132 in - - 132.4 in
    Height - Top of Cab - - 130 in -
    Length - Counterweight to Ripper - - 399 in -
    Width - Outside Front Tires - - 98.9 in -
    Length - Front Axle to Mid Tandem - - 241 in -
    Length - Front Tire to Rear of Machine - - 351 in -
    Length - Front Axle to Moldboard - - 100 in -
    Length - Between Tandem Axles - - 60 in -
    Width - Outside Rear Tires - - 98.9 in -
    Width - Tire Center Lines - - 84.3 in -
    Height - Front Axle Center - - 23.5 in -
    Height - Exhaust Stack - - 128 in -
    Height - Top of Cylinders - - 120 in -
    Ground Clearance - Rear Axle - - 13.3 in -
    Width All Wheel Drive (AWD) - - - 99.3 in

    Service Refill
    Hydraulic System 14.5 gal (US) - - -
    Engine Crankcase 7.9 gal (US) - - -
    Circle Drive 1.8 gal (US) - - -
    Fuel Tank 100 gal (US) - - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - - -
    Fuel Capacity - 131 gal (US) 104 gal (US) -
    Cooling System - 18.5 gal (US) 15 gal (US) -
    Hydraulic System - Tank - 18.5 gal (US) 16.9 gal (US) -
    Hydraulic System - Total - 38.6 gal (US) 26.4 gal (US) -
    DEF Tank - 4.2 gal (US) - -
    Engine Oil - 9.5 gal (US) 7.9 gal (US) -
    Transmission - Differential - Final Drives - 26 gal (US) 18.5 gal (US) -
    Tandem Housing - Each - 34 gal (US) 20 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.24 gal (US) 0.13 gal (US) -
    Circle Drive Housing - 2.6 gal (US) 1.8 gal (US) -
    Diesel Exhaust Fluid - - 5.8 gal (US) -

    Machine Weight
    Note *Typically equipped with push block and ripper. - - -
    All-Wheel Drive (AWD) Weight 44613 lb - - -
    Weight* 42325 lb - - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 15.7 in 18.9 in 18.7 in
    Maximum Depth of Cut 28.9 in 18.5 in 28.1 in 28.1 in
    Maximum Blade Position Angle - 65° 90° -
    Maximum Shoulder Reach Outside of Tires - Right - 103 in 77.9 in -
    Circle Centershift - Right - 22 in 28.7 in -
    Maximum Shoulder Reach Outside of Tires - Left - 103 in 70.5 in -
    Moldboard Sideshift - Right - 31.1 in 26 in -
    Blade Tip Range - Backward - 5° 5° -
    Moldboard Sideshift - Left - 29.1 in 20.1 in -
    Circle Centershift - Left - 27.2 in 27.4 in -
    Blade Tip Range - Forward - 40° 40° -
    Circle Center Shift Left - - - 29.6 in
    Circle Center Shift Right - - - 28.7 in
    Maximum Shoulder Reach Left - - - 74.3 in
    Maximum Shoulder Reach Right - - - 71.3 in
    Moldboard Side Shift Left - - - 25.6 in
    Moldboard Side Shift Right - - - 20.7 in
    Blade Tip Range Backward - - - 5
    Blade Tip Range Forward - - - 40

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse 8 Forward/6 Reverse -
    Transmission - Direct drive, power shift, countershaft APECS, Direct Drive, Powershift -
    Brakes - Parking - Spring applied, hydraulically released Multiple Oil Disc -
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft - -
    Brakes - Service - Oil-actuated, oil disc Multiple Oil Disc -
    Brakes - Secondary - Oil-actuated, oil-disc Dual Circuit -
    Brakes - Service - Surface Area - - 3565 in² -

    Hydraulic System
    Circuit Type - Electro-hydraulic load sensing, closed center Parallel -
    Pump Type - Variable piston Variable Piston -
    Maximum System Pressure - 3590 psi 3500 psi -
    Standby Pressure - 856 psi 885 psi -
    Pump Output* - 74 gal/min - -
    Note - *Pump output measured at 2,150 rpm. - -
    Pump Output - - 55.7 gal/min -
    Reservoir Tank Capacity - - 16.9 gal (US) -

    Operating Specifications
    Forward - 6th - 16 mile/h 14.5 mile/h -
    Forward - 2nd - 3.8 mile/h 3.4 mile/h -
    Forward - 8th - 32.1 mile/h 29 mile/h -
    Forward - 5th - 11.8 mile/h 10.6 mile/h -
    Reverse - 3rd - 6 mile/h 5.4 mile/h -
    Turning Radius - Outside Front Tires - 30.5 ft 25.59 ft -
    Forward - 4th - 7.6 mile/h 6.9 mile/h -
    Top Speed - Reverse - 25.3 mile/h 23 mile/h -
    Forward - 7th - 22 mile/h 19.9 mile/h -
    Articulation Angle - Left/Right - 20° 20° -
    Reverse - 1st - 2.2 mile/h 2 mile/h -
    Forward - 3rd - 5.5 mile/h 5 mile/h -
    Reverse - 4th - 9.3 mile/h 8.4 mile/h -
    Forward - 1st - 2.8 mile/h 2.5 mile/h -
    Top Speed - Forward - 32.1 mile/h 29 mile/h -
    Reverse - 6th - 25.3 mile/h 23 mile/h -
    Steering Range - Left/Right - 47.5° 50° -
    Reverse - 2nd - 4.1 mile/h 3.7 mile/h -
    Reverse - 5th - 17.4 mile/h 15.7 mile/h -
    Note - Calculated with no slip and 23.5R25 L-3 tires. - -

    Frame
    Front Frame Structure - Width - 14 in 12 in -
    Front Axle - Height to Center - 26.4 in 23.5 in -
    Circle - Diameter - 71.7 in 60.2 in -
    Front Frame Structure - Thickness - 0.6 in - -
    Front Frame Structure - Height - 18.1 in 12.6 in -
    Circle - Blade Beam Thickness - 2 in 1.6 in -
    Drawbar - Width - 3 in 3 in -
    Front Axle - Wheel Lean - 18° Left/17° Right - -
    Front Axle - Total Oscillation per Side - 35° 32° -
    Drawbar - Height - 8 in 6 in -
    Circle - Height - - 5.4 in -
    Drawbar - Thickness - - 0.5 in -
    Front-Top/Bottom Plate - Width - - 12 in -
    Front-Top/Bottom Plate - Thickness - - 0.87 in -
    Front Axle - Wheel Lean - Left/Right - - 18° -

    Tandems
    Sidewall Thickness - Outer - 0.9 in 0.71 in -
    Sidewall Thickness - Inner - 0.9 in 0.63 in -
    Tandem Oscillation - Front Up - 15° 15° -
    Tandem Oscillation - Front Down - 25° 25° -
    Height - 25.5 in 19.9 in -
    Width - 9.3 in 7.9 in -
    Drive Chain Pitch - 2.5 in 2 in -
    Wheel Axle Spacing - 72.5 in 60 in -

    Ripper
    Shank Holder Spacing - Minimum - 17.5 in - -
    Ripping Depth - Maximum - 17.8 in 16.8 in -
    Shank Holder Spacing - Maximum - 20 in - -
    Ripper Shank Holders - 7 5 -
    Penetration Force - 30311 lb 20812 lb -
    Pry-Out Force - 43700 lb 27794 lb -
    Machine Length Increase, Beam Raised - 63.4 in 40.6 in -
    Ripper Shank Holder Spacing - - 21 in -

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 53830 lb - -
    Gross Vehicle Weight - Base** - Total - 72298 lb - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb - -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 20494 lb - -
    Gross Vehicle Weight - Base** - Front Axle - 19837 lb - -
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb - -
    Gross Vehicle Weight - Typically Equipped - Total - 74324 lb - -
    Gross Vehicle Weight - Base** - Rear Axle - 52461 lb - -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab. - -
    Note (1) - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt. - -

    Dimensions (Approximate)
    Height - Top of Cylinders - 122.6 in - -
    Width - Outside Rear Tires - 134.3 in - -
    Height - Exhaust Stack - 141.1 in - -
    Length - Between Tandem Axles - 72.5 in - -
    Length - Front Axle to Mid Tandem - 290 in - -
    Width - Tire Center Lines - 106.4 in - -
    Length - Front Axle to Moldboard - 120.7 in - -
    Length - Counterweight to Ripper - 474.4 in - -
    Height - Front Axle Center - 29.9 in - -
    Width - Outside Front Tires - 134.3 in - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in - -
    Height - Top of Cab - 147.5 in - -
    Ground Clearance - Rear Axle - 16.7 in - -

    Standards
    Sound - ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008 ISO 6394; ISO 6395 -
    ROPS/FOPS - ISO 3471: 2008/ISO 3449: 2005 ISO 3471/ISO 3449 -
    Brakes - ISO 3450: 2011 ISO 3450 -
    Steering - ISO 5010: 2007 ISO 5010 -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 1st - 309 HP - -
    Gear - Forward 2nd - 309 HP - -
    Gear - Reverse 2nd - 309 HP - -
    Gear - Forward 4th - 325 HP - -
    Gear - Forward 6th - 341 HP - -
    Gear - Forward 5th - 332 HP - -
    Gear - Forward 8th - 362 HP - -
    Gear - Reverse 1st - 309 HP - -
    Gear - Forward 3rd - 315 HP - -
    Gear - Forward 7th - 347 HP - -
    Gear - Reverse 3rd-6th - 315 HP - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star - -
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star - -
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star - -
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star - -
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
    Gear - Forward 4th - 321 HP - -
    Gear - Reverse 2nd - 304 HP - -
    Gear - Forward 1st - 304 HP - -
    Gear - Reverse 3rd-6th - 311 HP - -
    Gear - Forward 3rd - 311 HP - -
    Gear - Forward 5th - 327 HP - -
    Gear - Forward 7th - 342 HP - -
    Gear - Forward 2nd - 304 HP - -
    Gear - Reverse 1st - 304 HP - -
    Gear - Forward 6th - 337 HP - -
    Gear - Forward 8th - 357 HP - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in -
    Rear - Scarifying Depth, Maximum - - 16.8 in -
    Mid, V-Type - Working Width - - 46.6 in -
    Front, V-Type - Working Width - - 47.4 in -
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in -
    Mid, V-Type - Scarifier Shank Holders - - 11 -
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in -
    Rear - Working Width - - 84 in -
    Rear - Scarifier Shank Holders - - 9 -
    Rear - Scarifier Shank Holder Spacing - - 10.5 in -

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -
    Note - - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

    Service Refill Capacities
    Fuel Tank - - - 78 gal (US)
    Circle Drive with Slip Clutch - - - 2 gal (US)
    Circle Drive without Slip Clutch - - - 0.5 gal (US)
    Cooling System - - - 40 l
    Engine Crankcase - - - 5.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - - 4.2 gal (US)
    Hydraulic System - - - 11.9 gal (US)
    Transmission - - - 4.8 gal (US)

    Weight
    Weight (Tier 4 Final)** - - - 40488 lb
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - - - 42119 lb
    All-Wheel Drive Weight (AWD) (Stage V)* - - - 40543 lb
    Weight (Stage V)* - - - 38912 lb
    Add a Similar Product: