CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    150 Motor Grader
    View Product Remove
    120 GC
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 HP 200 HP -
    Engine Model Cat® C9.3 Cat® C9.3 Cat® C4.4
    Bore 4.5 in 4.5 in 4.1 in
    Stroke 5.9 in 5.9 in 5 in
    Speed at Rated Power 2,000 rpm 2,000 rpm -
    Standard Capability 109 °F 109 °F -
    Maximum Torque - VHP Plus 840 lb/ft 920 lb/ft -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 HP 220 HP -
    VHP Plus - Gear - Net Power - Forward 2nd 189 HP 210 HP -
    VHP Plus - Gear - Net Power - Forward 5th 215 HP 236 HP -
    VHP Plus - Gear - Net Power - Forward 3rd 200 HP 220 HP -
    VHP Plus - Gear - Net Power - Forward 8th 231 HP 252 HP -
    Torque Rise 38% 39% -
    VHP Plus - Gear - Net Power - Reverse 2nd 189 HP 210 HP -
    VHP Plus - Gear - Net Power - Forward 1st 179 HP 200 HP -
    VHP Plus - Gear - Net Power - Forward 6th 220 HP 241 HP -
    VHP Plus - Gear - Net Power - Reverse 1st 179 HP 200 HP -
    VHP Plus Range - Net 133-172 kW (179-231 hp) 149-188 kW (200-252 hp) -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards
    VHP Plus - Gear - Net Power - Forward 7th 225 HP 247 HP -
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) 149-188 kW (202-255 hp) -
    VHP Plus - Gear - Net Power - Forward 4th 210 HP 231 HP -
    Base Power (1st Gear) - Net - Metric 181 HP 202 HP -
    High Ambient - Fan Speed - Standard 1,400 rpm 1,400 rpm -
    Displacement 567.5 in³ 567.5 in³ 268.5 in³
    Number of Cylinders 6 6 -
    Derating Altitude 10000 ft 10000 ft 9842 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm 1,550 rpm -
    High Ambient - Fan Speed - Minimum 500 rpm 500 rpm -
    High - Ambient Capability 122 °F 122 °F -
    Net Power - ISO 9249/SAE J1349 - - 171 HP
    Torque Rise - ISO 9294 - - 21%
    Maximum Torque - - 544 lb/ft
    Engine Power AWD (ISO 14396) - - 128 kW
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner,

    Weights
    Operating Weight - Typically Equipped 42647 lb 43950 lb 14496 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb 38069 lb -
    Operating Weight - Typically Equipped - Front Axle 12055 lb 12549 lb -
    Operating Weight - Typically Equipped - Rear Axle 30592 lb 31401 lb -
    Gross Vehicle Weight - Base - Front Axle 9343 lb 9601 lb -
    Gross Vehicle Weight - Base - Rear Axle 28077 lb 28590 lb -
    Gross Vehicle Weight - Maximum - Total 55144 lb 55144 lb -
    Gross Vehicle Weight - Base - Total 37420 lb 38191 lb -
    Operating Weight - Typically Equipped - Total 42647 lb 43950 lb -

    Moldboard
    Blade Width 12 ft 12 ft 12 ft
    Moldboard - Height 24 in 24 in -
    Moldboard - Thickness 0.87 in 0.87 in -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 4.7 in
    Cutting Edge Width 6 in 6 in 6 in
    Cutting Edge Thickness 0.6 in 0.6 in -
    End Bit - Width 6 in 6 in 152 in
    End Bit - Thickness 0.6 in 0.6 in -
    Blade Pull - Base GVW 25269 lb 25732 lb -
    Blade Pull - Maximum GVW 34262 lb 34262 lb -
    Blade Down Pressure - Base GVW 16038 lb 16480 lb -
    Blade Down Pressure - Maximum GVW 29309 lb 29308 lb -
    Moldboard - Blade Width 12 ft 12 ft -
    Blade Height - - 20 in

    Operating Specifications
    Top Speed - Forward 29 mile/h 29 mile/h -
    Top Speed - Reverse 23 mile/h 23 mile/h -
    Turning Radius - Outside Front Tires 25.59 ft 25.59 ft -
    Steering Range - Left/Right 50° 50° -
    Articulation Angle - Left/Right 20° 20° -
    Forward - 1st 2.5 mile/h 2.5 mile/h -
    Forward - 2nd 3.4 mile/h 3.4 mile/h -
    Forward - 3rd 5 mile/h 5 mile/h -
    Forward - 4th 6.9 mile/h 6.9 mile/h -
    Forward - 5th 10.6 mile/h 10.6 mile/h -
    Forward - 6th 14.5 mile/h 14.5 mile/h -
    Forward - 7th 19.9 mile/h 19.9 mile/h -
    Forward - 8th 29 mile/h 29 mile/h -
    Reverse - 1st 2 mile/h 2 mile/h -
    Reverse - 2nd 3.7 mile/h 3.7 mile/h -
    Reverse - 3rd 5.4 mile/h 5.4 mile/h -
    Reverse - 4th 8.4 mile/h 8.4 mile/h -
    Reverse - 5th 15.7 mile/h 15.7 mile/h -
    Reverse - 6th 23 mile/h 23 mile/h -

    Service Refill
    Fuel Capacity 104 gal (US) 104 gal (US) -
    Cooling System 15 gal (US) 15 gal (US) -
    Hydraulic System - Total 26.4 gal (US) 26.4 gal (US) -
    Hydraulic System - Tank 16.9 gal (US) 16.9 gal (US) -
    Diesel Exhaust Fluid 5.8 gal (US) 5.8 gal (US) -
    Transmission - Differential - Final Drives 18.5 gal (US) 18.5 gal (US) -
    Engine Oil 7.9 gal (US) 7.9 gal (US) -
    Tandem Housing - Each 20 gal (US) 20 gal (US) -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.13 gal (US) -
    Circle Drive Housing 1.8 gal (US) 1.8 gal (US) -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse -
    Transmission APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift -
    Brakes - Service Multiple Oil Disc Multiple Oil Disc -
    Brakes - Service - Surface Area 3565 in² 3565 in² -
    Brakes - Parking Multiple Oil Disc Multiple Oil Disc -
    Brakes - Secondary Dual Circuit Dual Circuit -

    Hydraulic System
    Circuit Type Parallel Parallel -
    Pump Type Variable Piston Variable Piston -
    Pump Output 55.7 gal/min 55.7 gal/min -
    Maximum System Pressure 3500 psi 3500 psi -
    Reservoir Tank Capacity 16.9 gal (US) 16.9 gal (US) -
    Standby Pressure 885 psi 885 psi -

    Frame
    Drawbar - Width 3 in 3 in -
    Circle - Diameter 60.2 in 60.2 in -
    Circle - Blade Beam Thickness 1.6 in 1.6 in -
    Drawbar - Height 6 in 6 in -
    Front Frame Structure - Height 12.6 in 12.6 in -
    Circle - Height 5.4 in 5.4 in -
    Front Frame Structure - Width 12 in 12 in -
    Drawbar - Thickness 0.5 in 0.5 in -
    Front-Top/Bottom Plate - Width 12 in 12 in -
    Front-Top/Bottom Plate - Thickness 0.87 in 0.87 in -
    Front Axle - Height to Center 23.5 in 23.5 in -
    Front Axle - Wheel Lean - Left/Right 18° 18° -
    Front Axle - Total Oscillation per Side 32° 32° -

    Blade Range
    Circle Centershift - Right 28.7 in 28.7 in 25.8 in
    Circle Centershift - Left 27.4 in 27.4 in 25.8 in
    Moldboard Sideshift - Right 26 in 26 in 26.1 in
    Moldboard Sideshift - Left 20.1 in 20.1 in 20.2 in
    Maximum Blade Position Angle 90° 90° -
    Blade Tip Range - Forward 40° 40° 40°
    Blade Tip Range - Backward 5° 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in 77.9 in -
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in 70.5 in -
    Maximum Lift Above Ground 18.9 in 18.9 in 16.1 in
    Maximum Depth of Cut 28.1 in 28.1 in 30.5 in

    Ripper
    Ripping Depth - Maximum 16.8 in 16.8 in -
    Ripper Shank Holder Spacing 21 in 21 in -
    Ripper Shank Holders 5 5 -
    Penetration Force 20812 lb 20812 lb -
    Pry-Out Force 27794 lb 27794 lb -
    Machine Length Increase, Beam Raised 40.6 in 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in 18.4 in -
    Mid, V-Type - Scarifier Shank Holders 11 11 -
    Rear - Scarifying Depth, Maximum 16.8 in 16.8 in -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in 40.6 in -
    Front, V-Type - Working Width 47.4 in 47.4 in -
    Mid, V-Type - Working Width 46.6 in 46.6 in -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in 11.5 in -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May 11-May -
    Rear - Working Width 84 in 84 in -
    Rear - Scarifier Shank Holders 9 9 -
    Rear - Scarifier Shank Holder Spacing 10.5 in 10.5 in -

    Standards
    Brakes ISO 3450 ISO 3450 -
    Sound ISO 6394; ISO 6395 ISO 6394; ISO 6395 -
    Steering ISO 5010 ISO 5010 -
    ROPS/FOPS ISO 3471/ISO 3449 ISO 3471/ISO 3449 -

    Tandems
    Height 19.9 in 19.9 in -
    Width 7.9 in 7.9 in -
    Sidewall Thickness - Inner 0.63 in 0.63 in -
    Sidewall Thickness - Outer 0.71 in 0.71 in -
    Drive Chain Pitch 2 in 2 in -
    Wheel Axle Spacing 60 in 60 in -
    Tandem Oscillation - Front Up 15° 15° -
    Tandem Oscillation - Front Down 25° 25° -

    Dimensions
    Height - Top of Cab 130 in 130 in -
    Length - Counterweight to Ripper 399 in 399 in -
    Width - Outside Front Tires 98.9 in 98.9 in -
    Length - Front Axle to Mid Tandem 241 in 241 in -
    Length - Front Tire to Rear of Machine 351 in 351 in -
    Length - Front Axle to Moldboard 100 in 100 in -
    Length - Between Tandem Axles 60 in 60 in -
    Width - Outside Rear Tires 98.9 in 98.9 in -
    Width - Tire Center Lines 84.3 in 84.3 in -
    Height - Front Axle Center 23.5 in 23.5 in -
    Height - Exhaust Stack 128 in 128 in -
    Height - Top of Cylinders 120 in 120 in -
    Ground Clearance - Rear Axle 13.3 in 13.3 in -
    Length of Machine* - - 391.4 in
    Maximum Height - - 149.1 in
    Width - - 94.6 in
    Note - - *Typically equipped with push block and ripper.

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Machine Weight
    All-Wheel Drive (AWD) Weight - - 36376 lb

    Service Refill Capacities
    Cooling System - - 10.3 gal (US)
    Circle Drive without Slip Clutch - - 0.4 gal (US)
    Hydraulic System - - 14.5 gal (US)
    Circle Drive with Slip Clutch - - 1.8 gal (US)
    Transmission - - 4.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 3.2 gal (US)
    Fuel Tank - - 71 gal (US)
    Engine Crankcase - - 2 gal (US)

    Sustainability
    Recyclability - - 92%
    Add a Similar Product: