CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    18 Motor Grader
    View Product Remove
    160 Motor Grader
    View Product Remove
    140 GC Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 HP - - -
    Engine Model Cat® C9.3 Cat® C13 Cat® C9.3 Cat 7.1
    Bore 4.5 in 5.1 in 4.5 in 4.1 in
    Stroke 5.9 in 6.2 in 5.9 in 5.3 in
    Speed at Rated Power 2,000 rpm 2,000 rpm 2,000 rpm -
    Standard Capability 109 °F - 109 °F 109 °F
    Maximum Torque - VHP Plus 840 lb/ft - 1000 lb/ft -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 HP - 241 HP -
    VHP Plus - Gear - Net Power - Forward 2nd 189 HP - 231 HP -
    VHP Plus - Gear - Net Power - Forward 5th 215 HP - 257 HP -
    VHP Plus - Gear - Net Power - Forward 3rd 200 HP - 241 HP -
    VHP Plus - Gear - Net Power - Forward 8th 231 HP - 272 HP -
    Torque Rise 38% - 39% -
    VHP Plus - Gear - Net Power - Reverse 2nd 189 HP - 231 HP -
    VHP Plus - Gear - Net Power - Forward 1st 179 HP - 221 HP -
    VHP Plus - Gear - Net Power - Forward 6th 220 HP - 262 HP -
    VHP Plus - Gear - Net Power - Reverse 1st 179 HP - 221 HP -
    VHP Plus Range - Net 133-172 kW (179-231 hp) - 165-203 kW (221-272 hp) -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Forward 7th 225 HP - 267 HP -
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) - 165-203 kW (224-276 hp) -
    VHP Plus - Gear - Net Power - Forward 4th 210 HP - 252 HP -
    Base Power (1st Gear) - Net - Metric 181 HP 309 HP 224 HP -
    High Ambient - Fan Speed - Standard 1,400 rpm - 1,400 rpm -
    Displacement 567.5 in³ 763 in³ 567.5 in³ 427.8 in³
    Number of Cylinders 6 6 6 6
    Derating Altitude 10000 ft - 10000 ft 9842 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm - 1,550 rpm -
    High Ambient - Fan Speed - Minimum 500 rpm - 500 rpm -
    High - Ambient Capability 122 °F - 122 °F 122 °F
    Base Power (1st Gear) - Net - 304 HP 221 HP -
    Standard - Ambient Capability - 122 °F - -
    VHP Range - Net - 227-266 kW (304-357 hp) - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft - -
    Standard - Fan Speed - Minimum - 550 rpm - -
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 40% - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 1306 lb/ft - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 12500 ft - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 38% - -
    Standard - Fan Speed - Maximum - 1,450 rpm - -
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 38% - -
    VHP Range - Net - Metric - 227-266 kW (309-362 hp) - -
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - -
    Optimized VHP Range - Net - 227-266 kW (304-357 hp) - -
    Engine Power (ISO 14396) - - - 196 HP
    Engine RPM - - - 2,200
    Maximum Torque - ISO 9249 - - - 616 lb/ft
    Torque Rise - ISO 9294 - - - 40%
    Note (1) - - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
    Note (2) - - - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (3) - - - Power as declared per ISO 14396
    Engine Power AWD (ISO 14396) - - - 196 HP

    Weights
    Operating Weight - Typically Equipped 42647 lb 74324 lb 45547 lb 38912 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle 12055 lb - 13237 lb -
    Operating Weight - Typically Equipped - Rear Axle 30592 lb - 32310 lb -
    Gross Vehicle Weight - Base - Front Axle 9343 lb - 9907 lb -
    Gross Vehicle Weight - Base - Rear Axle 28077 lb - 28812 lb -
    Gross Vehicle Weight - Maximum - Total 55144 lb - 55144 lb -
    Gross Vehicle Weight - Base - Total 37420 lb - 38719 lb -
    Operating Weight - Typically Equipped - Total 42647 lb - 45547 lb -
    Note - - - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

    Moldboard
    Blade Width 12 ft 18 ft 14 ft 12 ft
    Moldboard - Height 24 in - 24 in -
    Moldboard - Thickness 0.87 in - 0.87 in -
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 5 in 6.5 in 4.4 in
    Cutting Edge Width 6 in 10 in 6 in 6 in
    Cutting Edge Thickness 0.6 in 1.4 in 0.6 in -
    End Bit - Width 6 in 6 in 6 in -
    End Bit - Thickness 0.6 in 0.75 in 0.6 in -
    Blade Pull - Base GVW 25269 lb - 25931 lb -
    Blade Pull - Maximum GVW 34262 lb - 34262 lb -
    Blade Down Pressure - Base GVW 16038 lb - 17004 lb -
    Blade Down Pressure - Maximum GVW 29309 lb - 29308 lb -
    Moldboard - Blade Width 12 ft - 14 ft -
    Down Force - Maximum GVW - 43861 lb - -
    Blade Pull* - Base GVW - 47216 lb - -
    Blade Pull* - Maximum GVW - 52878 lb - -
    Down Force - Base GVW - 34008 lb - -
    Thickness - 1 in - -
    Width - 18 ft - -
    Height - 31 in - -
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - -
    Blade Height - - - 24 in
    End Bit - - - 6 in

    Operating Specifications
    Top Speed - Forward 29 mile/h 32.1 mile/h 29.5 mile/h -
    Top Speed - Reverse 23 mile/h 25.3 mile/h 23.3 mile/h -
    Turning Radius - Outside Front Tires 25.59 ft 30.5 ft 25.59 ft -
    Steering Range - Left/Right 50° 47.5° 50° -
    Articulation Angle - Left/Right 20° 20° 20° -
    Forward - 1st 2.5 mile/h 2.8 mile/h 2.6 mile/h -
    Forward - 2nd 3.4 mile/h 3.8 mile/h 3.5 mile/h -
    Forward - 3rd 5 mile/h 5.5 mile/h 5.1 mile/h -
    Forward - 4th 6.9 mile/h 7.6 mile/h 7 mile/h -
    Forward - 5th 10.6 mile/h 11.8 mile/h 10.8 mile/h -
    Forward - 6th 14.5 mile/h 16 mile/h 14.7 mile/h -
    Forward - 7th 19.9 mile/h 22 mile/h 20.3 mile/h -
    Forward - 8th 29 mile/h 32.1 mile/h 29.5 mile/h -
    Reverse - 1st 2 mile/h 2.2 mile/h 2 mile/h -
    Reverse - 2nd 3.7 mile/h 4.1 mile/h 3.8 mile/h -
    Reverse - 3rd 5.4 mile/h 6 mile/h 5.5 mile/h -
    Reverse - 4th 8.4 mile/h 9.3 mile/h 8.5 mile/h -
    Reverse - 5th 15.7 mile/h 17.4 mile/h 16 mile/h -
    Reverse - 6th 23 mile/h 25.3 mile/h 23.3 mile/h -
    Note - Calculated with no slip and 23.5R25 L-3 tires. - -

    Service Refill
    Fuel Capacity 104 gal (US) 131 gal (US) 104 gal (US) -
    Cooling System 15 gal (US) 18.5 gal (US) 15 gal (US) -
    Hydraulic System - Total 26.4 gal (US) 38.6 gal (US) 26.4 gal (US) -
    Hydraulic System - Tank 16.9 gal (US) 18.5 gal (US) 16.9 gal (US) -
    Diesel Exhaust Fluid 5.8 gal (US) - 5.8 gal (US) -
    Transmission - Differential - Final Drives 18.5 gal (US) 26 gal (US) 18.5 gal (US) -
    Engine Oil 7.9 gal (US) 9.5 gal (US) 7.9 gal (US) -
    Tandem Housing - Each 20 gal (US) 34 gal (US) 22.9 gal (US) -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.24 gal (US) 0.13 gal (US) -
    Circle Drive Housing 1.8 gal (US) 2.6 gal (US) 1.8 gal (US) -
    DEF Tank - 4.2 gal (US) - -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse 8 Forward/6 Reverse -
    Transmission APECS, Direct Drive, Powershift Direct drive, power shift, countershaft APECS, Direct Drive, Powershift -
    Brakes - Service Multiple Oil Disc Oil-actuated, oil disc Multiple Oil Disc -
    Brakes - Service - Surface Area 3565 in² - 3565 in² -
    Brakes - Parking Multiple Oil Disc Spring applied, hydraulically released Multiple Oil Disc -
    Brakes - Secondary Dual Circuit Oil-actuated, oil-disc Dual Circuit Control -
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft - -

    Hydraulic System
    Circuit Type Parallel Electro-hydraulic load sensing, closed center Parallel -
    Pump Type Variable Piston Variable piston Variable Piston -
    Pump Output 55.7 gal/min - 55.5 gal/min -
    Maximum System Pressure 3500 psi 3590 psi 3503 psi -
    Reservoir Tank Capacity 16.9 gal (US) - 16.9 gal (US) -
    Standby Pressure 885 psi 856 psi 885 psi -
    Pump Output* - 74 gal/min - -
    Note - *Pump output measured at 2,150 rpm. - -

    Frame
    Drawbar - Width 3 in 3 in 3 in -
    Circle - Diameter 60.2 in 71.7 in 61.1 in -
    Circle - Blade Beam Thickness 1.6 in 2 in 1.6 in -
    Drawbar - Height 6 in 8 in 6 in -
    Front Frame Structure - Height 12.6 in 18.1 in 12.6 in -
    Circle - Height 5.4 in - 6.3 in -
    Front Frame Structure - Width 12 in 14 in 12 in -
    Drawbar - Thickness 0.5 in - 0.5 in -
    Front-Top/Bottom Plate - Width 12 in - 12 in -
    Front-Top/Bottom Plate - Thickness 0.87 in - 0.87 in -
    Front Axle - Height to Center 23.5 in 26.4 in 23.5 in -
    Front Axle - Wheel Lean - Left/Right 18° - 18° -
    Front Axle - Total Oscillation per Side 32° 35° 32° -
    Front Frame Structure - Thickness - 0.6 in - -
    Front Axle - Wheel Lean - 18° Left/17° Right - -

    Blade Range
    Circle Centershift - Right 28.7 in 22 in 28.7 in -
    Circle Centershift - Left 27.4 in 27.2 in 27.4 in -
    Moldboard Sideshift - Right 26 in 31.1 in 26 in -
    Moldboard Sideshift - Left 20.1 in 29.1 in 20.1 in -
    Maximum Blade Position Angle 90° 65° 90° -
    Blade Tip Range - Forward 40° 40° 40° -
    Blade Tip Range - Backward 5° 5° 5° -
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in 103 in 89.7 in -
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in 103 in 82.3 in -
    Maximum Lift Above Ground 18.9 in 15.7 in 17.8 in 18.7 in
    Maximum Depth of Cut 28.1 in 18.5 in 29.5 in 28.1 in
    Circle Center Shift Left - - - 29.6 in
    Circle Center Shift Right - - - 28.7 in
    Maximum Shoulder Reach Left - - - 74.3 in
    Maximum Shoulder Reach Right - - - 71.3 in
    Moldboard Side Shift Left - - - 25.6 in
    Moldboard Side Shift Right - - - 20.7 in
    Blade Tip Range Backward - - - 5
    Blade Tip Range Forward - - - 40

    Ripper
    Ripping Depth - Maximum 16.8 in 17.8 in 16.8 in -
    Ripper Shank Holder Spacing 21 in - 21 in -
    Ripper Shank Holders 5 7 5 -
    Penetration Force 20812 lb 30311 lb 20812 lb -
    Pry-Out Force 27794 lb 43700 lb 28493 lb -
    Machine Length Increase, Beam Raised 40.6 in 63.4 in 40.6 in -
    Shank Holder Spacing - Minimum - 17.5 in - -
    Shank Holder Spacing - Maximum - 20 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - 18.4 in -
    Mid, V-Type - Scarifier Shank Holders 11 - 11 -
    Rear - Scarifying Depth, Maximum 16.8 in - 16.8 in -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - 40.6 in -
    Front, V-Type - Working Width 47.4 in - 47.4 in -
    Mid, V-Type - Working Width 46.6 in - 46.6 in -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - 11.5 in -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - 5/11 -
    Rear - Working Width 84 in - 84 in -
    Rear - Scarifier Shank Holders 9 - 9 -
    Rear - Scarifier Shank Holder Spacing 10.5 in - 10.5 in -

    Standards
    Brakes ISO 3450 ISO 3450: 2011 ISO 3450 -
    Sound ISO 6394; ISO 6395 ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008 ISO 6394; ISO 6395 -
    Steering ISO 5010 ISO 5010: 2007 ISO 5010 -
    ROPS/FOPS ISO 3471/ISO 3449 ISO 3471: 2008/ISO 3449: 2005 ISO 3471; ISO 3449 -

    Tandems
    Height 19.9 in 25.5 in 22.5 in -
    Width 7.9 in 9.3 in 8 in -
    Sidewall Thickness - Inner 0.63 in 0.9 in 0.69 in -
    Sidewall Thickness - Outer 0.71 in 0.9 in 0.71 in -
    Drive Chain Pitch 2 in 2.5 in 2 in -
    Wheel Axle Spacing 60 in 72.5 in 60 in -
    Tandem Oscillation - Front Up 15° 15° 15° -
    Tandem Oscillation - Front Down 25° 25° 25° -

    Dimensions
    Height - Top of Cab 130 in - 130 in -
    Length - Counterweight to Ripper 399 in - 399 in -
    Width - Outside Front Tires 98.9 in - 98.9 in -
    Length - Front Axle to Mid Tandem 241 in - 241 in -
    Length - Front Tire to Rear of Machine 351 in - 351 in -
    Length - Front Axle to Moldboard 100 in - 100 in -
    Length - Between Tandem Axles 60 in - 60 in -
    Width - Outside Rear Tires 98.9 in - 98.9 in -
    Width - Tire Center Lines 84.3 in - 84.3 in -
    Height - Front Axle Center 23.5 in - 23.5 in -
    Height - Exhaust Stack 128 in - 128 in -
    Height - Top of Cylinders 120 in - 120 in -
    Ground Clearance - Rear Axle 13.3 in - 13.3 in -
    Width All Wheel Drive (AWD) - - - 99.3 in
    Length of Machine* - - - 406.7 in
    Maximum Height - - - 132.4 in
    Width - - - 95.6 in
    Note - - - *Typically equipped with push block and ripper.

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 53830 lb - -
    Gross Vehicle Weight - Base** - Total - 72298 lb - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb - -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 20494 lb - -
    Gross Vehicle Weight - Base** - Front Axle - 19837 lb - -
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb - -
    Gross Vehicle Weight - Typically Equipped - Total - 74324 lb - -
    Gross Vehicle Weight - Base** - Rear Axle - 52461 lb - -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab. - -
    Note (1) - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt. - -

    Dimensions (Approximate)
    Height - Top of Cylinders - 122.6 in - -
    Width - Outside Rear Tires - 134.3 in - -
    Height - Exhaust Stack - 141.1 in - -
    Length - Between Tandem Axles - 72.5 in - -
    Length - Front Axle to Mid Tandem - 290 in - -
    Width - Tire Center Lines - 106.4 in - -
    Length - Front Axle to Moldboard - 120.7 in - -
    Length - Counterweight to Ripper - 474.4 in - -
    Height - Front Axle Center - 29.9 in - -
    Width - Outside Front Tires - 134.3 in - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in - -
    Height - Top of Cab - 147.5 in - -
    Ground Clearance - Rear Axle - 16.7 in - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 1st - 309 HP - -
    Gear - Forward 2nd - 309 HP - -
    Gear - Reverse 2nd - 309 HP - -
    Gear - Forward 4th - 325 HP - -
    Gear - Forward 6th - 341 HP - -
    Gear - Forward 5th - 332 HP - -
    Gear - Forward 8th - 362 HP - -
    Gear - Reverse 1st - 309 HP - -
    Gear - Forward 3rd - 315 HP - -
    Gear - Forward 7th - 347 HP - -
    Gear - Reverse 3rd-6th - 315 HP - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star - -
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star - -
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star - -
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star - -
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
    Gear - Forward 4th - 321 HP - -
    Gear - Reverse 2nd - 304 HP - -
    Gear - Forward 1st - 304 HP - -
    Gear - Reverse 3rd-6th - 311 HP - -
    Gear - Forward 3rd - 311 HP - -
    Gear - Forward 5th - 327 HP - -
    Gear - Forward 7th - 342 HP - -
    Gear - Forward 2nd - 304 HP - -
    Gear - Reverse 1st - 304 HP - -
    Gear - Forward 6th - 337 HP - -
    Gear - Forward 8th - 357 HP - -

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -
    Note - - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

    Service Refill Capacities
    Fuel Tank - - - 78 gal (US)
    Circle Drive with Slip Clutch - - - 2 gal (US)
    Circle Drive without Slip Clutch - - - 0.5 gal (US)
    Cooling System - - - 40 l
    Engine Crankcase - - - 5.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - - 4.2 gal (US)
    Hydraulic System - - - 11.9 gal (US)
    Transmission - - - 4.8 gal (US)

    Weight
    Weight (Tier 4 Final)** - - - 40488 lb
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - - - 42119 lb
    All-Wheel Drive Weight (AWD) (Stage V)* - - - 40543 lb
    Weight (Stage V)* - - - 38912 lb
    Add a Similar Product: