Compare Equipment Go Back
 352 Hydraulic Excavator |
 352 LRE Long Reach Excavation Hydraulic Excavator |
 M319 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 443 HP | 424 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | 449 hp (metric) | 429.9 hp (metric) | 174 hp (metric) |
| Engine Model | Cat C13B | Cat C13 | C4.4 |
| Engine Power - ISO 14396 | 445 HP | 425 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | 451 hp (metric) | 431 hp (metric) | 176 hp (metric) |
| Bore | 5 in | 5 in | 4.1 in |
| Stroke | 6 in | 6 in | 127 mm |
| Displacement | 763 in³ | 763 in³ | 268.5 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 107800 lb | 128800 lb | - |
| Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 26.11 ft | 42.8 ft | - |
| Boom | Reach 6.9 m (22'8") | LRE Boom 11.5 m (37'9") | - |
| Stick | Reach 3.9 m (12'10") | LRE Stick 8.5 m (27'11') | - |
| Bucket | HD 3.3 m³ (4.32 yd³) | HD 1.19 m³ (1.56 yd³) | - |
| Maximum Reach at Ground Level | 39.9 ft | 64.4 ft | - |
| Maximum Cutting Height | 35.2 ft | 48.2 ft | - |
| Maximum Loading Height | 24.4 ft | 39.4 ft | - |
| Minimum Loading Height | 7.3 ft | 7.3 ft | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 26.6 ft | 42.5 ft | - |
| Maximum Vertical Wall Digging Depth | 19.3 ft | - | - |
| Bucket Digging Force - ISO | 60000 lbf | 31700 lbf | - |
| Stick Digging Force - ISO | 41100 lbf | 23380 lbf | - |
Hydraulic System |
|||
| Main System - Maximum Flow | 779 l/min (206 gal/min) | - | - |
| Maximum Pressure - Equipment | 5076 psi | 5076 psi | - |
| Maximum Pressure - Equipment - Lift Mode | 5511 psi | 5511 psi | - |
| Maximum Pressure - Travel | 5076 psi | 5076 psi | - |
| Maximum Pressure - Swing | 3771 psi | 3771 psi | - |
| Maximum Flow - Main System | - | 206 gal/min | - |
| Main System - Maximum Flow - Implement | - | - | 67 gal/min |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi |
Swing Mechanism |
|||
| Swing Speed | 8.3 r/min | - | 9.4 r/min |
| Maximum Swing Torque | 139000 ft·lbf | 138000 ft·lbf | 32560 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 188.9 gal (US) | 188.9 gal (US) | - |
| Cooling System | 13.7 gal (US) | 13.7 gal (US) | 35 l |
| Engine Oil | 10.6 gal (US) | - | - |
| Swing Drive | 2.8 gal (US) | 2.8 gal (US) | - |
| Final Drive - Each | 2.5 gal (US) | 2.5 gal (US) | - |
| Hydraulic System - Including Tank | 145.3 gal (US) | 145.3 gal (US) | 74 gal (US) |
| Hydraulic Tank | 57.3 gal (US) | 57.3 gal (US) | 31.7 gal (US) |
| DEF Tank | 21.1 gal (US) | 12.2 gal (US) | - |
| Engine Oil - With Filter | - | 10.6 gal (US) | - |
| Fuel Tank | - | - | 76.6 gal (US) |
| Diesel Exhaust Fluid (DEF) | - | - | 5.3 gal (US) |
Dimensions |
|||
| Boom | Reach 6.9 m (22'8") | LRE Boom 11.5 m (37'9") | VA 5.2 m (17'1") |
| Stick | Reach 3.9 m (12'10") | LRE Stick 8.5 m (27'11') | 2.5m (8'2") |
| Bucket | HD 3.3 m³ (4.32 yd³) | HD 1.19 m³ (1.56 yd³) | GD 0.91 m³ (1.19 yd³ ) |
| Shipping Height - Top of Cab | 10.7 ft | 11.1 ft | 10.7 ft |
| Handrail Height | 11.1 ft | 11.6 ft | - |
| Shipping Length | 39.1 ft | 54 ft | 26.6 ft |
| Tail Swing Radius | 12.4 ft | 12.3 ft | 6.25 ft |
| Counterweight Clearance | 4.2 ft | 4.7 ft | 4.25 ft |
| Ground Clearance | 1.7 ft | 2.3 ft | 1.4 ft |
| Track Length | 17.7 ft | 17.6 ft | - |
| Track Length to Center of Rollers | 14.4 ft | 14.2 ft | - |
| Track Gauge | 9 ft | 10.6 ft | - |
| Transport Width | 11.11 ft | 13.6 ft | - |
| Support Point | - | - | 11.6 ft |
| Undercarriage Length | - | - | 16.6 ft |
| Wheel Base | - | - | 8.8 ft |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
| Note | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Machine Weight |
|||
| Operating Weight Maximum | - | - | 46407 lb |
| Operating Weight Minimum | - | - | 41888 lb |
Transmission |
|||
| Maximum Travel Speed | - | - | 21.7 mile/h |
| Forward/Reverse - 1st Gear | - | - | 6.2 mile/h |
| Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h |
| Creeper Speed - 1st Gear | - | - | 3.4 mile/h |
| Creeper Speed - 2nd Gear | - | - | 9.3 mile/h |
| Drawbar Pull | - | - | 23380 lbf |
Working Ranges and Forces |
|||
| Boom Type | - | - | VA 5.2 m (17'1") |
| Stick | - | - | 2.5m (8'2") |
| Bucket | - | - | GD 0.91 m³ (1.19 yd³ ) |
| Dump Height | - | - | 25.6 ft |
| Digging Height | - | - | 18.9 ft |
| Reach at Ground Level | - | - | 30.2 ft |
| Vertical Wall Digging Depth | - | - | 14.6 ft |
| Stick Forces (ISO) | - | - | 16861 lbf |
| Bucket Forces (ISO) | - | - | 26752 lbf |
working Ranges and Forces |
|||
| Cutting Height | - | - | 35.2 ft |
Add a Similar Product:
