Compare Equipment Go Back

Cat® 352 Hydraulic Excavator
M315 Wheeled Excavator
Cat® 352 UHD Ultra High Demolition Hydraulic Excavator
352 LRE Long Reach Excavation Hydraulic Excavator

Engine

Net Power - ISO 9249 443 hp 145 hp 424 hp 424 hp
Net Power - ISO 9249 (DIN) 449 hp (metric) 147 hp (metric) 430 hp (metric) 429.9 hp (metric)
Engine Model Cat C13B C4.4 Cat C13 Cat C13
Engine Power - ISO 14396:2002 445 hp 148 hp 425 hp 425 hp
Engine Power - ISO 14396 (DIN) 451 hp (metric) 150 hp (metric) 431 hp (metric) 431 hp (metric)
Bore 5 in 4.1 in 5 in 5 in
Stroke 6 in 127 mm 6 in 6 in
Displacement 763 in³ 268.5 in³ 763 in³ 763 in³
Biodiesel Capability Up to B20¹ Up to B20¹ Up to B20¹ Up to B20¹
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Weights

Operating Weight 107800 lb - 143300 lb 128800 lb
Note (1) - - Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. -
Machine Weight - Retrofit Configuration - - 139300 lb -
Note (3) - - Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. -
UHD in Cradle - - 26000 lb -
Retrofit Boom in Cradle - R3.9 TB Stick - - 16310 lb -
Retrofit Boom in Cradle - R3.35 TB Stick - - 15950 lb -
Retrofit Boom in Cradle - R2.9 TB Stick - - 15760 lb -
Note - - - Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight.

Working Ranges & Forces

Maximum Digging Depth 26.11 ft - - 42.8 ft
Boom Reach 6.9 m (22'8") - - LRE Boom 11.5 m (37'9")
Stick Reach 3.9 m (12'10") - - LRE Stick 8.5 m (27'11')
Bucket HD 3.3 m³ (4.32 yd³) - - HD 1.19 m³ (1.56 yd³)
Maximum Reach at Ground Level 39.9 ft - - 64.4 ft
Maximum Cutting Height 35.2 ft - - 48.2 ft
Maximum Loading Height 24.4 ft - - 39.4 ft
Minimum Loading Height 7.3 ft - - 7.3 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 26.6 ft - - 42.5 ft
Maximum Vertical Wall Digging Depth 19.3 ft - - -
Bucket Digging Force - ISO 60000 lbf - - 31700 lbf
Stick Digging Force - ISO 41100 lbf - - 23380 lbf

Hydraulic System

Main System - Maximum Flow 779 l/min (206 gal/min) - 779 l/min (206 gal/min) -
Maximum Pressure - Equipment 5076 psi - 5076 psi 5076 psi
Maximum Pressure - Equipment - Lift Mode 5511 psi - 5511 psi 5511 psi
Maximum Pressure - Travel 5076 psi - 5076 psi 5076 psi
Maximum Pressure - Swing 3771 psi - 3771 psi 3771 psi
Main System - Maximum Flow - Implement - 73 gal/min - -
Maximum Pressure - Implement Circuit - Heavy Lift - 5366 psi - -
Maximum Pressure - Implement Circuit - Travel Circuit - 5076 psi - -
Maximum Pressure - Implement Circuit - Normal - 5076 psi - -
Maximum Flow - Main System - - - 206 gal/min

Swing Mechanism

Swing Speed 8.3 r/min 9.1 r/min 8.44 r/min -
Maximum Swing Torque 139000 ft·lbf 30340 ft·lbf 139000 ft·lbf 138000 ft·lbf

Service Refill Capacities

Fuel Tank Capacity 188.9 gal (US) - 188.9 gal (US) 188.9 gal (US)
Cooling System 13.7 gal (US) 24 l 13.7 gal (US) 13.7 gal (US)
Engine Oil 10.6 gal (US) - 10.6 gal (US) -
Swing Drive 2.8 gal (US) - - 2.8 gal (US)
Final Drive - Each 2.5 gal (US) - 2.5 gal (US) 2.5 gal (US)
Hydraulic System - Including Tank 145.3 gal (US) 58.1 gal (US) 145.3 gal (US) 145.3 gal (US)
Hydraulic Tank 57.3 gal (US) 23.8 gal (US) 57.3 gal (US) 57.3 gal (US)
DEF Tank 21.1 gal (US) - 12.2 gal (US) 12.2 gal (US)
Fuel Tank - 74 gal (US) - -
Diesel Exhaust Fluid (DEF) - 5.3 gal (US) - -
Swing Drive - Each - - 2.8 gal (US) -
Engine Oil - With Filter - - - 10.6 gal (US)

Dimensions

Boom Reach 6.9 m (22'8") VA 5.2 m (17'1") - LRE Boom 11.5 m (37'9")
Stick Reach 3.9 m (12'10") 2.5m (8'2") - LRE Stick 8.5 m (27'11')
Bucket HD 3.3 m³ (4.32 yd³) GD 0.76 m³ (0.99 yd³ ) - HD 1.19 m³ (1.56 yd³)
Shipping Height - Top of Cab 10.7 ft 10.9 ft 11.1 ft 11.1 ft
Handrail Height 11.1 ft - - 11.6 ft
Shipping Length 39.1 ft 25.1 ft 61.8 ft 54 ft
Tail Swing Radius 12.4 ft 5.9 ft 12.3 ft 12.3 ft
Counterweight Clearance 4.2 ft 4.2 ft 4.7 ft 4.7 ft
Ground Clearance 1.7 ft 1.5 ft 1.7 ft 2.3 ft
Track Length 17.7 ft - 18.9 ft 17.6 ft
Track Length to Center of Rollers 14.4 ft - 15.6 ft 14.2 ft
Track Gauge 9 ft - - 10.6 ft
Transport Width 11.11 ft - 10.7 ft 13.6 ft
Support Point - 10.1 ft - -
Undercarriage Length - 16 ft - -
Wheel Base - 8.4 ft - -
Note (1) - - 28 m (91'10") UHD Front -
Cab Height - With OPG - - 11.8 ft -
Working Gauge - Extended Position - - 11.2 ft -
Shipping Gauge - Retracted Position - - 7.9 ft -
Machine Length - without Front, with Counterweight - - 25.5 ft -
Machine Length - without Front and Counterweight - - 24.9 ft -
Track Width - Extended - - 13.1 ft -
Track Width - Retracted - - 9.8 ft -
Note (2) - - 600 mm (24") Track Shoes -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).
Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. - -

Machine Weight

Operating Weight Maximum - 39680 lb - -
Operating Weight Minimum - 34610 lb - -

Transmission

Maximum Travel Speed - 21.7 mile/h - -
Forward/Reverse - 1st Gear - 6.2 mile/h - -
Forward/Reverse - 2nd Gear - 21.7 mile/h - -
Creeper Speed - 1st Gear - 3.4 mile/h - -
Creeper Speed - 2nd Gear - 9.3 mile/h - -
Drawbar Pull - 23380 lbf - -

Working Ranges and Forces

Boom Type - VA 5.2 m (17'1") - -
Stick - 2.5m (8'2") - -
Bucket - GD 0.76 m³ (0.99 yd³ ) - -
Dump Height - 25.2 ft - -
Digging Height - 18.4 ft - -
Reach at Ground Level - 29.6 ft - -
Vertical Wall Digging Depth - 15 ft - -
Stick Forces (ISO) - 15961 lbf - -
Bucket Forces (ISO) - 23830 lbf - -
Maximum Pin Height at Stick Nose - - 90.8 ft -
Maximum Weight at Stick Nose - - 8157 lb -
Maximum Working Pin Height at Stick Nose - 1/2 - - 75.2 ft -
Maximum Working Reach at Stick Nose - 1/2 - - 45.4 ft -
Maximum Height at Stick Nose in Max Reach Position - - 52.9 ft -
Maximum Reach at Stick Nose - - 51.7 ft -
Note (1) - - 28 m (91' 10") UHD Front Over-the-Front -

working Ranges and Forces

Cutting Height - 34.2 ft - -

Swing Mechanism - UHD Fronts

Swing Speed - - 4.22 r/min -

Working Ranges and Forces - Retrofit Boom - Straight

Note 1 - - Straight - R3.35 m (11'0") Stick (Over-the-Front) -
Bucket - - GD 3.08 m³ (4.03 yd³) -
Maximum Pin Height at Stick Nose - - 39.8 ft -
Maximum Weight at Stick Nose - - 13190 lb -
Maximum Height at Stick Nose in Max Reach Position - - 7.7 ft -
Maximum Reach at Stick Nose - - 36.5 ft -
Maximum Digging Depth - - 17 ft -
Maximum Reach - Ground Level - - 41.9 ft -
Maximum Loading Height - - 33.6 ft -
Minimum Loading Height - - 15 ft -
Bucket Digging Force - ISO - - 60250 lbf -
Stick Digging Force - ISO - - 44740 lbf -

Working Ranges and Forces - Retrofit Boom - Bent

Note 1 - - Bent - R3.35 m (11'0") Stick -
Bucket - - GD 3.08 m³ (4.03 yd³) -
Maximum Digging Depth - - 21.9 ft -
Maximum Reach - Ground Level - - 39 ft -
Maximum Cutting Height - - 35.1 ft -
Maximum Loading Height - - 24.6 ft -
Minimum Loading Height - - 10 ft -
Bucket Digging Force - ISO - - 60250 lbf -
Stick Digging Force - ISO - - 44740 lbf -
Add a Similar Product:
  • M322 Add
  • M319 Wheeled Excavator Add
  • M320 Wheeled Excavator Add
  • M318 Wheeled Excavator Add
  • M316 Wheeled Excavator Add
  • M314 Wheeled Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add
  • Cat® 374 Hydraulic Excavator Add
  • Cat® 395 Hydaulic Excavator Add
  • Cat® 340 Hydraulic Excavator Add