Compare Equipment Go Back
 335 Hydraulic Excavator |
 M315 Wheeled Excavator |
 352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 273 HP | 145 HP | 424 HP |
| Net Power - ISO 9249 (DIN) | 277 hp (metric) | 147 hp (metric) | 429.9 hp (metric) |
| Engine Model | C7.1 | C4.4 | Cat C13 |
| Engine Power - ISO 14396 | 275 HP | 148 HP | 425 HP |
| Engine Power - ISO 14396 (DIN) | 279 hp (metric) | 150 hp (metric) | 431 hp (metric) |
| Bore | 4 in | 4.1 in | 5 in |
| Stroke | 5 in | 127 mm | 6 in |
| Displacement | 428 in³ | 268.5 in³ | 763 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 77000 lb | - | 128800 lb |
| Note | Long undercarriage Reach boom, R3.2 (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 600 mm (24") triple grouser shoes, 5000 kg (11,202 lb) counterweight and 3440 mm (11'3") blade. | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 22.9 ft | - | 42.8 ft |
| Boom | Reach 6.15 m (20'2") | - | LRE Boom 11.5 m (37'9") |
| Stick | Reach 3.2 m (10'6") | - | LRE Stick 8.5 m (27'11') |
| Bucket | HD 1.54 m³ (2.01 yd³) | - | HD 1.19 m³ (1.56 yd³) |
| Maximum Reach at Ground Level | 34.9 ft | - | 64.4 ft |
| Maximum Cutting Height | 36.6 ft | - | 48.2 ft |
| Maximum Loading Height | 26.1 ft | - | 39.4 ft |
| Minimum Loading Height | 9.5 ft | - | 7.3 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 22.4 ft | - | 42.5 ft |
| Maximum Vertical Wall Digging Depth | 19 ft | - | - |
| Bucket Digging Force - ISO | 46482 lbf | - | 31700 lbf |
| Stick Digging Force - ISO | 32319 lbf | - | 23380 lbf |
Hydraulic System |
|||
| Main System - Maximum Flow | 560 l/min (148 gal/min) | - | - |
| Maximum Pressure - Equipment | 5075 psi | - | 5076 psi |
| Maximum Pressure - Travel | 5075 psi | - | 5076 psi |
| Maximum Pressure - Swing | 4175 psi | - | 3771 psi |
| Main System - Maximum Flow - Implement | - | 73 gal/min | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
| Maximum Flow - Main System | - | - | 206 gal/min |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Swing Mechanism |
|||
| Swing Speed | 10.8 r/min | 9.1 r/min | - |
| Maximum Swing Torque | 79455 ft·lbf | 30340 ft·lbf | 138000 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 97.2 gal (US) | - | 188.9 gal (US) |
| Cooling System | 3.3 gal (US) | 24 l | 13.7 gal (US) |
| Engine Oil | 6.6 gal (US) | - | - |
| Swing Drive - Each | 2.9 gal (US) | - | - |
| Final Drive - Each | 1.8 gal (US) | - | 2.5 gal (US) |
| Hydraulic System - Including Tank | 92.5 gal (US) | 58.1 gal (US) | 145.3 gal (US) |
| Hydraulic Tank | 40.7 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
| DEF Tank | 7 gal (US) | - | 12.2 gal (US) |
| Fuel Tank | - | 74 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
| Engine Oil - With Filter | - | - | 10.6 gal (US) |
| Swing Drive | - | - | 2.8 gal (US) |
Dimensions |
|||
| Boom | Reach 6.15 m (20'2") | VA 5.2 m (17'1") | LRE Boom 11.5 m (37'9") |
| Stick | Reach 3.2 m (10'6") | 2.5m (8'2") | LRE Stick 8.5 m (27'11') |
| Bucket | HD 1.54 m³ (2.01 yd³) | GD 0.76 m³ (0.99 yd³ ) | HD 1.19 m³ (1.56 yd³) |
| Shipping Height - Top of Cab | 10.7 ft | 10.9 ft | 11.1 ft |
| Handrail Height | 11.2 ft | - | 11.6 ft |
| Shipping Length | 32.2 ft | 25.1 ft | 54 ft |
| Tail Swing Radius | 6.2 ft | 5.9 ft | 12.3 ft |
| Counterweight Clearance | 3.8 ft | 4.2 ft | 4.7 ft |
| Ground Clearance | 1.6 ft | 1.5 ft | 2.3 ft |
| Track Length | 16.5 ft | - | 17.6 ft |
| Length to Center of Rollers | 13.3 ft | - | - |
| Track Gauge | 9 ft | - | 10.6 ft |
| Transport Width | 11 ft | - | 13.6 ft |
| Support Point | - | 10.1 ft | - |
| Undercarriage Length | - | 16 ft | - |
| Wheel Base | - | 8.4 ft | - |
| Track Length to Center of Rollers | - | - | 14.2 ft |
Air Conditioning System |
|||
| Note (1) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 kg (1.98 lb) of refrigerant which has a CO2 equivalent of 1.287 metric tonnes (1.418 tons). | - | - |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
| Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Sustainability |
|||
| Recyclability | 98% | - | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 39680 lb | - |
| Operating Weight Minimum | - | 34610 lb | - |
Transmission |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
| Forward/Reverse - 1st Gear | - | 6.2 mile/h | - |
| Forward/Reverse - 2nd Gear | - | 21.7 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 23380 lbf | - |
Working Ranges and Forces |
|||
| Boom Type | - | VA 5.2 m (17'1") | - |
| Stick | - | 2.5m (8'2") | - |
| Bucket | - | GD 0.76 m³ (0.99 yd³ ) | - |
| Dump Height | - | 25.2 ft | - |
| Digging Height | - | 18.4 ft | - |
| Reach at Ground Level | - | 29.6 ft | - |
| Vertical Wall Digging Depth | - | 15 ft | - |
| Stick Forces (ISO) | - | 15961 lbf | - |
| Bucket Forces (ISO) | - | 23830 lbf | - |
working Ranges and Forces |
|||
| Cutting Height | - | 34.2 ft | - |
Add a Similar Product:
