Compare Equipment Go Back

335 Hydraulic Excavator
M314 Wheeled Excavator
M316 Wheeled Excavator
374 Hydraulic Excavator

Engine

Net Power - ISO 9249 273 HP 134 HP 141 HP 484 HP
Net Power - ISO 9249 (DIN) 277 hp (metric) 129 hp (metric) 143 hp (metric) 491 hp (metric)
Engine Model C7.1 Cat C3.6 Cat C4.4 Cat C15
Engine Power - ISO 14396 275 HP 134 HP 148 HP 485 HP
Engine Power - ISO 14396 (DIN) 279 hp (metric) 136 hp (metric) 150 hp (metric) 492 hp (metric)
Bore 4 in 3.9 in 4 ft 5.4 in
Stroke 5 in 5 in - 6.7 in
Displacement 428 in³ 221 in³ 268.5 in³ 928 in³
Biodiesel Capability Up to B20¹ Up to B20¹ Up to B20¹ Up to B20¹
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Weights

Operating Weight 77000 lb - - 162900 lb
Note Long undercarriage Reach boom, R3.2 (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 600 mm (24") triple grouser shoes, 5000 kg (11,202 lb) counterweight and 3440 mm (11'3") blade. - - Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight.

Working Ranges & Forces

Maximum Digging Depth 22.9 ft - - 28.1 ft
Boom Reach 6.15 m (20'2") - - Reach 7.8m (25'7")
Stick Reach 3.2 m (10'6") - - R3.6m (11'10")
Bucket HD 1.54 m³ (2.01 yd³) - - SD 3.3 m³ (4.32 yd³)
Maximum Reach at Ground Level 34.9 ft - - 43.2 ft
Maximum Cutting Height 36.6 ft - - 41.2 ft
Maximum Loading Height 26.1 ft - - 27.7 ft
Minimum Loading Height 9.5 ft - - 10.1 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 22.4 ft - - 27.8 ft
Maximum Vertical Wall Digging Depth 19 ft - - 22.8 ft
Bucket Digging Force - ISO 46482 lbf - - 80550 ft·lbf
Stick Digging Force - ISO 32319 lbf - - 66390 ft·lbf

Hydraulic System

Main System - Maximum Flow 560 l/min (148 gal/min) - - -
Maximum Pressure - Equipment 5075 psi 5076 psi 5076 psi 5366 psi
Maximum Pressure - Travel 5075 psi 5076 psi 5076 psi 5076 psi
Maximum Pressure - Swing 4175 psi 5149 psi 5076 psi 5076 psi
Main System - Maximum Flow - Implement - 71 gal/min 73 gal/min 237 gal/min
Maximum Pressure - Equipment - Lift Mode - - - 5511 psi

Swing Mechanism

Swing Speed 10.8 r/min 9.1 r/min 10.2 r/min 6.34 r/min
Maximum Swing Torque 79455 ft·lbf 28860 ft·lbf 32560 ft·lbf 220000 ft·lbf

Service Refill Capacities

Fuel Tank Capacity 97.2 gal (US) - - 243 gal (US)
Cooling System 3.3 gal (US) 6.3 gal (US) 6.3 gal (US) 19 gal (US)
Engine Oil 6.6 gal (US) - - 16 gal (US)
Swing Drive - Each 2.9 gal (US) - - -
Final Drive - Each 1.8 gal (US) - - 9 gal (US)
Hydraulic System - Including Tank 92.5 gal (US) 58.1 gal (US) 68.7 gal (US) 164 gal (US)
Hydraulic Tank 40.7 gal (US) 23.8 gal (US) 31.7 gal (US) 86 gal (US)
DEF Tank 7 gal (US) - - 21 gal (US)
Diesel Exhaust Fluid (DEF) - 5.3 gal (US) - -
Final Drive - 0.6 gal (US) 0.7 gal (US) -
Fuel Tank - 77.9 gal (US) 92.5 gal (US) -
Swing Drive - - - 5 gal (US)

Dimensions

Boom Reach 6.15 m (20'2") 5m (16' 6") 5205 mm (17' 1") Reach 7.8m (25'7")
Stick Reach 3.2 m (10'6") 2.2m (7' 3") 2.5 m (8' 2") R3.6m (11'10")
Bucket HD 1.54 m³ (2.01 yd³) 0.76m3 (.78 yd3) GD 0.8 m3 (1.05 yd3) SD 3.3 m³ (4.32 yd³)
Shipping Height - Top of Cab 10.7 ft 3315 ft 10.5 ft 11.8 ft
Handrail Height 11.2 ft - - 13 ft
Shipping Length 32.2 ft 26.9 ft 8630 ft 44.9 ft
Tail Swing Radius 6.2 ft 7.1 ft 7.7 ft 13.8 ft
Counterweight Clearance 3.8 ft 4.1 ft 4.3 ft 4.1 ft
Ground Clearance 1.6 ft 1.1 ft 1.3 ft 2.6 ft
Track Length 16.5 ft - - 19.3 ft
Length to Center of Rollers 13.3 ft - - -
Track Gauge 9 ft - - 11.2 ft
Transport Width 11 ft - - 11.1 ft
Undercarriage Length - 16.1 ft 16.3 ft -
Wheel Base - 8.2 ft 8.4 ft -
Support Point - - 12.7 ft -
Track Length to Center of Rollers - - - 15.5 ft
Note - - - Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps

Air Conditioning System

Note (1) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 kg (1.98 lb) of refrigerant which has a CO2 equivalent of 1.287 metric tonnes (1.418 tons). - - -
Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. -
Air Conditioning - - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

Sustainability

Recyclability 98% 91% - -

Machine Weight

Operating Weight Maximum - 39683 lb 36400 lb -
Note (1) - Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. -
Operating Weight Minimum - 33069 lb - -

Drive

Maximum Travel Speed - 23 mile/h 21.7 mile/h -

Working Ranges and Forces

Boom Type - VA Boom VA Boom -
Bucket - 0.76m3 (0.99 y3) GD GD 0.8 m3 (1.05 yd3) -
Stick - R2.2CB (7' 3") R2.5 (8' 2") -
Digging Height - 17.4 ft 18.5 ft -
Dump Height - 23 ft - -
Reach at Ground Level - 28.4 ft 29.4 ft -
Vertical Wall Digging Depth - 13.9 ft 14.5 mm -
Note (1) - Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). -
Cutting Height - - 33.2 ft -
Add a Similar Product:
  • M319 Wheeled Excavator Add
  • M320 Wheeled Excavator Add
  • M322 Add
  • M318 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • 352 LRE Long Reach Excavation Hydraulic Excavator Add
  • 395 Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add
  • 352 Hydraulic Excavator Add