Compare Equipment Go Back
330 Excavator | 30 Ton Excavator / Digger |
M322 |
395 Excavator |
M316 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 273 HP | 171 HP | 542 HP | 141 HP |
Net Power - ISO 9249 (DIN) | 277 hp (metric) | 174 hp (metric) | 550 hp (metric) | 143 hp (metric) |
Engine Model | Cat C7.1 | C 7.1 | Cat C18 | Cat C4.4 |
Engine Power - ISO 14396 | 275 HP | 174 HP | 543 HP | 148 HP |
Engine Power - ISO 14396 (DIN) | 279 hp (metric) | 176 hp (metric) | 551 hp (metric) | 150 hp (metric) |
Bore | 4 in | 4.1 in | 6 in | 4 ft |
Stroke | 5 in | 5.3 in | 7 in | - |
Displacement | 428 in³ | 427.8 in² | 1105 in³ | 268.5 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 69200 lb | - | 207400 lb | - |
Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.76 m³ (2.30 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - | - |
Note (1) | - | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 23.9 ft | - | 31.9 ft | - |
Boom | Reach 6.15 m (20'2") | - | GP 8.4m (25'7") | - |
Stick | Reach 3.2 m (10'6") | - | R4.4m (14'5") | - |
Bucket | HD 1.76 m³ (2.30 yd³) | - | SD 5.2m³ (6.8 yd³) | - |
Maximum Reach at Ground Level | 35 ft | - | 48.3 ft | - |
Maximum Cutting Height | 32.9 ft | - | 44.5 ft | - |
Maximum Loading Height | 22.8 ft | - | 30.4 ft | - |
Minimum Loading Height | 7.5 ft | - | 9.11 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | 31.4 ft | - |
Maximum Vertical Wall Digging Depth | 19.7 ft | - | 22.3 ft | - |
Bucket Digging Force - ISO | 40200 lbf | - | 86100 ft·lbf | - |
Stick Digging Force - ISO | 28300 lbf | - | 68540 ft·lbf | - |
Hydraulic System |
||||
Main System - Maximum Flow | 560 l/min (148 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | - | 5366 psi | 5076 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | - | - |
Maximum Pressure - Travel | 5075 psi | - | 5076 psi | 5076 psi |
Maximum Pressure - Swing | 4320 psi | - | 4496 psi | 5076 psi |
Main System - Maximum Flow - Implement | - | 95 gal/min | 281 gal/min | 73 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - | - |
Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - | - |
Swing Mechanism |
||||
Swing Speed | 11.5 r/min | - | 6.26 r/min | 10.2 r/min |
Maximum Swing Torque | 81132 lb/ft | - | 267333 ft·lbf | 32560 ft·lbf |
Swing Torque | - | 44250 lb/ft | - | - |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | - | 322 gal (US) | - |
Cooling System | 6.6 gal (US) | 10.6 gal (US) | 19 gal (US) | 6.3 gal (US) |
Engine Oil | 6.6 gal (US) | 3.4 gal (US) | 18 gal (US) | - |
Swing Drive | 2.6 gal (US) | - | 6 gal (US) | - |
Final Drive - Each | 1.5 gal (US) | - | 5 gal (US) | - |
Hydraulic System - Including Tank | 81.9 gal (US) | 71.3 gal (US) | 196 gal (US) | 68.7 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 52.8 gal (US) | 98 gal (US) | 31.7 gal (US) |
DEF Tank | 10.8 gal (US) | - | 21 gal (US) | - |
Fuel Tank | - | 124.2 gal (US) | - | 92.5 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - | - |
Final Drive | - | - | - | 0.7 gal (US) |
Dimensions |
||||
Boom | Reach 6.15 m (20'2") | VA 5.4m (17'10") | GP 8.4m (25'7") | 5205 mm (17' 1") |
Stick | Reach 3.2 m (10'6") | 2.9m (9'2") | R4.4m (14'5") | 2.5 m (8' 2") |
Bucket | HD 1.76 m³ (2.30 yd³) | - | SD 5.2m³ (6.8 yd³) | GD 0.8 m3 (1.05 yd3) |
Shipping Height - Top of Cab | 10 ft | - | 12 ft | 10.5 ft |
Handrail Height | 10 ft | - | 12.4 ft | - |
Shipping Length | 34.2 ft | 31.1 ft | 49.6 ft | 8630 ft |
Tail Swing Radius | 10.3 ft | 9.2 ft | 15.11 ft | 7.7 ft |
Counterweight Clearance | 3.7 ft | 4.3 ft | 5.5 ft | 4.3 ft |
Ground Clearance | 1.6 ft | 1.25 ft | 2.9 ft | 1.3 ft |
Track Length | 15.9 ft | - | 20.1 ft | - |
Length to Center of Rollers | 13.1 ft | - | - | - |
Track Gauge | 8.5 ft | - | 11.6 ft | - |
Transport Width | 11.1 ft | - | 12.9 ft | - |
Shipping Height with Falling Object Guard | - | 11 ft | - | - |
Support Point | - | 11.3 ft | - | 12.7 ft |
Wheel Base | - | 9 ft | - | 8.4 ft |
Track Length to Center of Rollers | - | - | 16.1 ft | - |
Note | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps | - |
Undercarriage Length | - | - | - | 16.3 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Sustainability |
||||
Recyclability | 97% | - | 98% | - |
Machine Weight |
||||
Operating Weight Maximum | - | 52911 lb | - | 36400 lb |
Operating Weight Minimum | - | 44750 lb | - | - |
Note (1) | - | - | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. |
Transmission |
||||
Forward/Reverse - 2nd Gear | - | 18.6 mile/h | - | - |
Forward/Reverse - 1st Gear | - | 5.6 mile/h | - | - |
Creeper Speed - 1st Gear | - | 3.4 mile/h | - | - |
Creeper Speed - 2nd Gear | - | 9.3 mile/h | - | - |
Drawbar Pull | - | 28551 lbf | - | - |
Maximum Gradeability | - | 70% | - | - |
Working Ranges and Forces |
||||
Boom Type | - | VA 5.4m (17'10") | - | VA Boom |
Stick | - | 2.9m (9'2") | - | R2.5 (8' 2") |
Bucket | - | GD 1.2 m³ (1.7 yd³) | - | GD 0.8 m3 (1.05 yd3) |
Maximum Loading Height | - | 24.7 ft | - | - |
Maximum Digging Depth | - | 21.8 ft | - | - |
Reach at Ground Level | - | 33.4 ft | - | 29.4 ft |
Vertical Wall Digging Depth | - | 17.3 ft | - | 14.5 mm |
Bucket Forces (ISO) | - | 33946 lbf | - | - |
Stick Forces (ISO) | - | 23605 lbf | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 21.6 ft | - | - |
Cutting Height | - | - | - | 33.2 ft |
Digging Height | - | - | - | 18.5 ft |
Note (1) | - | - | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). |
working Ranges and Forces |
||||
Cutting Height | - | 35.8 ft | - | - |
Drive |
||||
Maximum Travel Speed | - | - | - | 21.7 mile/h |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M320 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- 352 Hydraulic Excavator Add