Compare Equipment Go Back
330 Excavator | 30 Ton Excavator / Digger |
M318 Wheeled Excavator |
340 UHD Ultra High Demolition Hydraulic Excavator |
M314 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 273 HP | 171 HP | 346 HP | 134 HP |
Net Power - ISO 9249 (DIN) | 277 hp (metric) | 174 hp (metric) | 352 hp (metric) | 129 hp (metric) |
Engine Model | Cat C7.1 | C4.4 | Cat C9.3B | Cat C3.6 |
Engine Power - ISO 14396 | 275 HP | 174 HP | 347 HP | 134 HP |
Engine Power - ISO 14396 (DIN) | 279 hp (metric) | 176 hp (metric) | 351 hp (metric) | 136 hp (metric) |
Bore | 4 in | 4 in | 5 in | 3.9 in |
Stroke | 5 in | 5 in | 6 in | 5 in |
Displacement | 428 in³ | 285.5 in³ | 568 in³ | 221 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 69200 lb | - | 122600 lb | - |
Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.76 m³ (2.30 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - | - |
Note (1) | - | - | Hydraulic Variable Gauge undercarriage, 22 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool. | - |
Machine Weight - Retrofit Configuration | - | - | 118600 lb | - |
Note (2) | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight. | - |
UHD in Cradle | - | - | 18700 lb | - |
Retrofit Boom in Cradle - R3.9 DB Stick | - | - | 13710 lb | - |
Retrofit Boom in Cradle - R3.2 DB Stick | - | - | 13340 lb | - |
Retrofit Boom in Cradle - R2.8 DB Stick | - | - | 13120 lb | - |
2-piece Retrofit boom in cradle - R3.2 DB stick | - | - | 17440 lb | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 23.9 ft | - | - | - |
Boom | Reach 6.15 m (20'2") | - | - | - |
Stick | Reach 3.2 m (10'6") | - | - | - |
Bucket | HD 1.76 m³ (2.30 yd³) | - | - | - |
Maximum Reach at Ground Level | 35 ft | - | - | - |
Maximum Cutting Height | 32.9 ft | - | - | - |
Maximum Loading Height | 22.8 ft | - | - | - |
Minimum Loading Height | 7.5 ft | - | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | - | - |
Maximum Vertical Wall Digging Depth | 19.7 ft | - | - | - |
Bucket Digging Force - ISO | 40200 lbf | - | - | - |
Stick Digging Force - ISO | 28300 lbf | - | - | - |
Hydraulic System |
||||
Main System - Maximum Flow | 560 l/min (148 gal/min) | - | 560 l/min (148 gal/min) | - |
Maximum Pressure - Equipment | 5075 psi | 5366 psi | 5076 psi | 5076 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | 5511 psi | - |
Maximum Pressure - Travel | 5075 psi | 5076 gal/min | 5076 psi | 5076 psi |
Maximum Pressure - Swing | 4320 psi | 5149 gal/min | 4264 psi | 5149 psi |
Main System - Maximum Flow - Implement | - | 67 gal/min | - | 71 gal/min |
Swing Mechanism |
||||
Swing Speed | 11.5 r/min | 9.4 r/min | 8 r/min | 9.1 r/min |
Maximum Swing Torque | 81132 lb/ft | - | 105000 ft·lbf | 28860 ft·lbf |
Maximum Swing Speed | - | 32560 ft·lbf | - | - |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | - | 159 gal (US) | - |
Cooling System | 6.6 gal (US) | 8.5 gal (US) | 11 gal (US) | 6.3 gal (US) |
Engine Oil | 6.6 gal (US) | - | 9 gal (US) | - |
Swing Drive | 2.6 gal (US) | - | 5 gal (US) | - |
Final Drive - Each | 1.5 gal (US) | - | 2 gal (US) | - |
Hydraulic System - Including Tank | 81.9 gal (US) | 68.7 gal (US) | 145 gal (US) | 58.1 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 31.7 gal (US) | 43 gal (US) | 23.8 gal (US) |
DEF Tank | 10.8 gal (US) | - | 21 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - | 5.3 gal (US) |
Final Drive | - | 0.7 gal (US) | - | 0.6 gal (US) |
Fuel Tank | - | 92.5 gal (US) | - | 77.9 gal (US) |
Dimensions |
||||
Boom | Reach 6.15 m (20'2") | 5205 mm (17'1") | - | 5m (16' 6") |
Stick | Reach 3.2 m (10'6") | 2.5 m (8' 2") | - | 2.2m (7' 3") |
Bucket | HD 1.76 m³ (2.30 yd³) | 0.91 m³ GD (1.19 yd³) | - | 0.76m3 (.78 yd3) |
Shipping Height - Top of Cab | 10 ft | 11 ft | 11.1 ft | 3315 ft |
Handrail Height | 10 ft | - | - | - |
Shipping Length | 34.2 ft | 27.8 ft | 49.9 ft | 26.9 ft |
Tail Swing Radius | 10.3 ft | 7.7 ft | 11.6 ft | 7.1 ft |
Counterweight Clearance | 3.7 ft | 4.3 ft | 4.6 ft | 4.1 ft |
Ground Clearance | 1.6 ft | 1.1 ft | 1.7 ft | 1.1 ft |
Track Length | 15.9 ft | - | 18.9 ft | - |
Length to Center of Rollers | 13.1 ft | - | - | - |
Track Gauge | 8.5 ft | - | - | - |
Transport Width | 11.1 ft | - | 10.7 ft | - |
Support Point | - | 11.5 ft | - | - |
Wheel Base | - | 8.9 ft | - | 8.2 ft |
Note (1) | - | - | 22 m (72'2") UHD Front | - |
Cab Height - With OPG | - | - | 11.8 ft | - |
Track Length to Center of Rollers | - | - | 15.6 ft | - |
Working Gauge - Extended Position | - | - | 11.1 ft | - |
Shipping Gauge - Retracted Position | - | - | 7.8 ft | - |
Machine Length - without Front, with Counterweight | - | - | 23.3 ft | - |
Machine Length - without Front and Counterweight | - | - | 22.9 ft | - |
Track Width - Extended | - | - | 13.1 ft | - |
Track Width - Retracted | - | - | 9.8 ft | - |
Note (2) | - | - | 600 mm (24") Track Shoes | - |
Undercarriage Length | - | - | - | 16.1 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Sustainability |
||||
Recyclability | 97% | 92% | - | 91% |
Machine Weight |
||||
Operating Weight Maximum | - | 43980 lb | - | 39683 lb |
Operating Weight Minimum | - | 38580 lb | - | 33069 lb |
Note (1) | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. |
Note (2) | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - | - |
Drive |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | 23 mile/h |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | - | VA Boom |
Bucket | - | 0.91 m³ GD (1.19 yd³) | - | 0.76m3 (0.99 y3) GD |
Digging Height | - | 19.3 ft | - | 17.4 ft |
Stick | - | 2.5 m (8' 2") | - | R2.2CB (7' 3") |
Reach at Ground Level | - | 30.2 ft | - | 28.4 ft |
Vertical Wall Digging Depth | - | 15.1 ft | - | 13.9 ft |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | 22 m (72' 2") UHD Front (Over-the-Front) | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a |
Bucket Forces (ISO) | - | 26752 lbf | - | - |
Stick Forces (ISO) | - | 16861 lbf | - | - |
Cutting Height | - | 33.7 ft | - | - |
Maximum Pin Height at Stick Nose | - | - | 72.2 ft | - |
Maximum Weight at Stick Nose | - | - | 8160 lb | - |
Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 61 ft | - |
Maximum Working Reach at Stick Nose - 1/2 | - | - | 38.4 ft | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 41.5 ft | - |
Maximum Reach at Stick Nose | - | - | 44.4 ft | - |
Dump Height | - | - | - | 23 ft |
Service Refill |
||||
Engine Oil | - | 2.9 gal (US) | - | - |
Swing Mechanism - UHD Fronts |
||||
Swing Speed | - | - | 4.09 r/min | - |
Working Ranges and Forces - Retrofit Boom - Straight |
||||
Note 1 | - | - | Straight - R3.2 m (10' 6") Stick (Over-the-Front) - HVG Undercarriage | - |
Bucket | - | - | GD 2.27 m³ (2.97 yd³) | - |
Maximum Pin Height at Stick Nose | - | - | 39.8 ft | - |
Maximum Weight at Stick Nose | - | - | 9260 lb | - |
Maximum Height at Stick Nose in Max Reach Position | - | - | 7.6 ft | - |
Maximum Reach at Stick Nose | - | - | 34.8 ft | - |
Maximum Digging Depth | - | - | 16.1 ft | - |
Maximum Reach - Ground Level | - | - | 39.9 ft | - |
Maximum Loading Height | - | - | 34 ft | - |
Minimum Loading Height | - | - | 15.7 ft | - |
Bucket Digging Force - ISO | - | - | 47160 lbf | - |
Stick Digging Force - ISO | - | - | 37300 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
||||
Note 1 | - | - | Bent - R3.2DB (10'6") Stick - HVG Undercarriage | - |
Bucket | - | - | GD 2.27 m³ (2.97 yd³) | - |
Maximum Digging Depth | - | - | 21.4 ft | - |
Maximum Reach - Ground Level | - | - | 36.7 ft | - |
Maximum Cutting Height | - | - | 35.4 ft | - |
Maximum Loading Height | - | - | 24.9 ft | - |
Minimum Loading Height | - | - | 10.4 ft | - |
Bucket Digging Force - ISO | - | - | 47160 lbf | - |
Stick Digging Force - ISO | - | - | 37300 lbf | - |
Add a Similar Product: