Compare Equipment Go Back
330 Excavator | 30 Ton Excavator / Digger |
395 Excavator |
M319 Wheeled Excavator |
M314 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 273 HP | 542 HP | 171 HP | 134 HP |
Net Power - ISO 9249 (DIN) | 277 hp (metric) | 550 hp (metric) | 174 hp (metric) | 129 hp (metric) |
Engine Model | Cat C7.1 | Cat C18 | C4.4 | Cat C3.6 |
Engine Power - ISO 14396 | 275 HP | 543 HP | 174 HP | 134 HP |
Engine Power - ISO 14396 (DIN) | 279 hp (metric) | 551 hp (metric) | 176 hp (metric) | 136 hp (metric) |
Bore | 4 in | 6 in | 4.1 in | 3.9 in |
Stroke | 5 in | 7 in | 127 mm | 5 in |
Displacement | 428 in³ | 1105 in³ | 268.5 in³ | 221 in³ |
Biodiesel Capability | Up to B20¹ | B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 69200 lb | 207400 lb | - | - |
Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.76 m³ (2.30 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - | - |
Note (1) | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. | - | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 23.9 ft | 31.9 ft | - | - |
Boom | Reach 6.15 m (20'2") | GP 8.4m (25'7") | - | - |
Stick | Reach 3.2 m (10'6") | R4.4m (14'5") | - | - |
Bucket | HD 1.76 m³ (2.30 yd³) | SD 5.2m³ (6.8 yd³) | - | - |
Maximum Reach at Ground Level | 35 ft | 48.3 ft | - | - |
Maximum Cutting Height | 32.9 ft | 44.5 ft | - | - |
Maximum Loading Height | 22.8 ft | 30.4 ft | - | - |
Minimum Loading Height | 7.5 ft | 9.11 ft | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | 31.4 ft | - | - |
Maximum Vertical Wall Digging Depth | 19.7 ft | 22.3 ft | - | - |
Bucket Digging Force - ISO | 40200 lbf | 86100 ft·lbf | - | - |
Stick Digging Force - ISO | 28300 lbf | 68540 ft·lbf | - | - |
Hydraulic System |
||||
Main System - Maximum Flow | 560 l/min (148 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | 5366 psi | - | 5076 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | - | - |
Maximum Pressure - Travel | 5075 psi | 5076 psi | - | 5076 psi |
Maximum Pressure - Swing | 4320 psi | 4496 psi | - | 5149 psi |
Main System - Maximum Flow - Implement | - | 281 gal/min | 67 gal/min | 71 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | - |
Swing Mechanism |
||||
Swing Speed | 11.5 r/min | 6.26 r/min | 9.4 r/min | 9.1 r/min |
Maximum Swing Torque | 81132 lb/ft | 267333 ft·lbf | 32560 ft·lbf | 28860 ft·lbf |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | 322 gal (US) | - | - |
Cooling System | 6.6 gal (US) | 19 gal (US) | 35 l | 6.3 gal (US) |
Engine Oil | 6.6 gal (US) | 18 gal (US) | - | - |
Swing Drive | 2.6 gal (US) | 6 gal (US) | - | - |
Final Drive - Each | 1.5 gal (US) | 5 gal (US) | - | - |
Hydraulic System - Including Tank | 81.9 gal (US) | 196 gal (US) | 74 gal (US) | 58.1 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 98 gal (US) | 31.7 gal (US) | 23.8 gal (US) |
DEF Tank | 10.8 gal (US) | 21 gal (US) | - | - |
Fuel Tank | - | - | 76.6 gal (US) | 77.9 gal (US) |
Diesel Exhaust Fluid (DEF) | - | - | 5.3 gal (US) | 5.3 gal (US) |
Final Drive | - | - | - | 0.6 gal (US) |
Dimensions |
||||
Boom | Reach 6.15 m (20'2") | GP 8.4m (25'7") | VA 5.2 m (17'1") | 5m (16' 6") |
Stick | Reach 3.2 m (10'6") | R4.4m (14'5") | 2.5m (8'2") | 2.2m (7' 3") |
Bucket | HD 1.76 m³ (2.30 yd³) | SD 5.2m³ (6.8 yd³) | GD 0.91 m³ (1.19 yd³ ) | 0.76m3 (.78 yd3) |
Shipping Height - Top of Cab | 10 ft | 12 ft | 10.7 ft | 3315 ft |
Handrail Height | 10 ft | 12.4 ft | - | - |
Shipping Length | 34.2 ft | 49.6 ft | 26.6 ft | 26.9 ft |
Tail Swing Radius | 10.3 ft | 15.11 ft | 6.25 ft | 7.1 ft |
Counterweight Clearance | 3.7 ft | 5.5 ft | 4.25 ft | 4.1 ft |
Ground Clearance | 1.6 ft | 2.9 ft | 1.4 ft | 1.1 ft |
Track Length | 15.9 ft | 20.1 ft | - | - |
Length to Center of Rollers | 13.1 ft | - | - | - |
Track Gauge | 8.5 ft | 11.6 ft | - | - |
Transport Width | 11.1 ft | 12.9 ft | - | - |
Track Length to Center of Rollers | - | 16.1 ft | - | - |
Note | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps | - | - |
Support Point | - | - | 11.6 ft | - |
Undercarriage Length | - | - | 16.6 ft | 16.1 ft |
Wheel Base | - | - | 8.8 ft | 8.2 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - | - |
Note | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Sustainability |
||||
Recyclability | 97% | 98% | - | 91% |
Machine Weight |
||||
Operating Weight Maximum | - | - | 46407 lb | 39683 lb |
Operating Weight Minimum | - | - | 41888 lb | 33069 lb |
Note (1) | - | - | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. |
Transmission |
||||
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | - | 6.2 mile/h | - |
Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h | - |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | - |
Drawbar Pull | - | - | 23380 lbf | - |
Working Ranges and Forces |
||||
Boom Type | - | - | VA 5.2 m (17'1") | VA Boom |
Stick | - | - | 2.5m (8'2") | R2.2CB (7' 3") |
Bucket | - | - | GD 0.91 m³ (1.19 yd³ ) | 0.76m3 (0.99 y3) GD |
Dump Height | - | - | 25.6 ft | 23 ft |
Digging Height | - | - | 18.9 ft | 17.4 ft |
Reach at Ground Level | - | - | 30.2 ft | 28.4 ft |
Vertical Wall Digging Depth | - | - | 14.6 ft | 13.9 ft |
Stick Forces (ISO) | - | - | 16861 lbf | - |
Bucket Forces (ISO) | - | - | 26752 lbf | - |
Note (1) | - | - | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a |
working Ranges and Forces |
||||
Cutting Height | - | - | 35.2 ft | - |
Drive |
||||
Maximum Travel Speed | - | - | - | 23 mile/h |
Add a Similar Product:
- M322 Add
- M320 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- 352 Hydraulic Excavator Add