Compare Equipment Go Back
 330 GC Excavator | 30 Ton Excavator / Digger |
 M320 Wheeled Excavator |
 M319 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 201 HP | 171 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | 204 hp (metric) | 174 hp (metric) | 174 hp (metric) |
| Engine Model | Cat C7.1 | C4.4 | C4.4 |
| Engine Power - ISO 14396 | 202 HP | 174 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | 205 hp (metric) | 176 hp (metric) | 176 hp (metric) |
| Bore | 4 in | 4 in | 4.1 in |
| Stroke | 5 in | 5.3 in | 127 mm |
| Displacement | 428 in³ | 268.5 in³ | 268.5 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 68100 lb | - | - |
| Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 23.8 ft | - | - |
| Boom | Reach 6.15 m (20'2") | - | - |
| Stick | Reach 3.2 m (10'6") | - | - |
| Bucket | HD 1.54 m³ (2.01 yd³) | - | - |
| Maximum Reach at Ground Level | 35.1 ft | - | - |
| Maximum Cutting Height | 32.9 ft | - | - |
| Maximum Loading Height | 22.8 ft | - | - |
| Minimum Loading Height | 7.5 ft | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | - |
| Maximum Vertical Wall Digging Depth | 19.8 ft | - | - |
| Bucket Digging Force - ISO | 40200 lbf | - | - |
| Stick Digging Force - ISO | 28300 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow | 560 L/min (148 gal/min) | - | - |
| Maximum Pressure - Equipment | 5075 psi | 5366 psi | - |
| Maximum Pressure - Travel | 5075 psi | 5076 gal/min | - |
| Maximum Pressure - Swing | 4120 psi | 5729 gal/min | - |
| Main System - Maximum Flow - Implement | - | 81 gal/min | 67 gal/min |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi |
Swing Mechanism |
|||
| Swing Speed | 11.5 r/min | 9.2 r/min | 9.4 r/min |
| Maximum Swing Torque | 77370 ft·lbf | 37000 ft·lbf | 32560 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 125.2 gal (US) | - | - |
| Cooling System | 6.6 gal (US) | 8.4 gal (US) | 35 l |
| Engine Oil | 6.6 gal (US) | - | - |
| Swing Drive - Each | 2.6 gal (US) | - | - |
| Final Drive - Each | 1.5 gal (US) | - | - |
| Hydraulic System - Including Tank | 81.9 gal (US) | 71.3 gal (US) | 74 gal (US) |
| Hydraulic Tank | 38.8 gal (US) | 40.9 gal (US) | 31.7 gal (US) |
| DEF Tank | 10.8 gal (US) | - | - |
| Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | 5.3 gal (US) |
| Final Drive | - | 0.7 gal (US) | - |
| Fuel Tank | - | 124.2 gal (US) | 76.6 gal (US) |
Dimensions |
|||
| Boom | Reach 6.15 m (20'2") | 5260 mm (17'3") | VA 5.2 m (17'1") |
| Stick | Reach 3.2 m (10'6") | 2.5 m (8' 2") | 2.5m (8'2") |
| Bucket | HD 1.54 m³ (2.01 yd³) | 0.98 m³ GD (1.28 yd³) | GD 0.91 m³ (1.19 yd³ ) |
| Shipping Height - Top of Cab | 10 ft | 11 ft | 10.7 ft |
| Handrail Height | 10 ft | - | - |
| Shipping Length | 34.2 ft | 29.3 ft | 26.6 ft |
| Tail Swing Radius | 10.3 ft | 8.5 ft | 6.25 ft |
| Counterweight Clearance | 3.7 ft | 4.3 ft | 4.25 ft |
| Ground Clearance | 1.6 ft | 1.4 ft | 1.4 ft |
| Track Length | 15.11 ft | - | - |
| Length to Center of Rollers | 13.1 ft | - | - |
| Track Gauge | 8.6 ft | - | - |
| Transport Width | 10.5 ft | - | - |
| Support Point | - | 11.8 ft | 11.6 ft |
| Wheel Base | - | 8.9 ft | 8.8 ft |
| Undercarriage Length | - | - | 16.6 ft |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | - |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Sustainability |
|||
| Recyclability | 97% | - | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 46740 lb | 46407 lb |
| Operating Weight Minimum | - | 41450 lb | 41888 lb |
Transmission |
|||
| Maximum Travel Speed | - | 21.7 mile/h | 21.7 mile/h |
| Forward/Reverse - 1st Gear | - | - | 6.2 mile/h |
| Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h |
| Creeper Speed - 1st Gear | - | - | 3.4 mile/h |
| Creeper Speed - 2nd Gear | - | - | 9.3 mile/h |
| Drawbar Pull | - | - | 23380 lbf |
Working Ranges and Forces |
|||
| Boom Type | - | VA Boom | VA 5.2 m (17'1") |
| Bucket | - | 0.98 m³ GD (1.28 yd³) | GD 0.91 m³ (1.19 yd³ ) |
| Stick | - | 2.5 m (8' 2") | 2.5m (8'2") |
| Reach at Ground Level | - | 30.5 ft | 30.2 ft |
| Vertical Wall Digging Depth | - | 13.9 ft | 14.6 ft |
| Cutting Height | - | 32.6 ft | - |
| Bucket Forces (ISO) | - | 30799 lbf | 26752 lbf |
| Stick Forces (ISO) | - | 20682 lbf | 16861 lbf |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - |
| Dump Height | - | - | 25.6 ft |
| Digging Height | - | - | 18.9 ft |
working Ranges and Forces |
|||
| Cutting Height | - | - | 35.2 ft |
Add a Similar Product:
-
M322 Add
-
M316 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
M314 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
374 Hydraulic Excavator Add
-
395 Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add