Compare Equipment Go Back
 330 GC Excavator | 30 Ton Excavator / Digger |
 M316 Wheeled Excavator |
 M314 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 201 HP | 141 HP | 134 HP |
| Net Power - ISO 9249 (DIN) | 204 hp (metric) | 143 hp (metric) | 129 hp (metric) |
| Engine Model | Cat C7.1 | Cat C4.4 | Cat C3.6 |
| Engine Power - ISO 14396 | 202 HP | 148 HP | 134 HP |
| Engine Power - ISO 14396 (DIN) | 205 hp (metric) | 150 hp (metric) | 136 hp (metric) |
| Bore | 4 in | 4 ft | 3.9 in |
| Stroke | 5 in | - | 5 in |
| Displacement | 428 in³ | 268.5 in³ | 221 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 68100 lb | - | - |
| Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 23.8 ft | - | - |
| Boom | Reach 6.15 m (20'2") | - | - |
| Stick | Reach 3.2 m (10'6") | - | - |
| Bucket | HD 1.54 m³ (2.01 yd³) | - | - |
| Maximum Reach at Ground Level | 35.1 ft | - | - |
| Maximum Cutting Height | 32.9 ft | - | - |
| Maximum Loading Height | 22.8 ft | - | - |
| Minimum Loading Height | 7.5 ft | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | - |
| Maximum Vertical Wall Digging Depth | 19.8 ft | - | - |
| Bucket Digging Force - ISO | 40200 lbf | - | - |
| Stick Digging Force - ISO | 28300 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow | 560 L/min (148 gal/min) | - | - |
| Maximum Pressure - Equipment | 5075 psi | 5076 psi | 5076 psi |
| Maximum Pressure - Travel | 5075 psi | 5076 psi | 5076 psi |
| Maximum Pressure - Swing | 4120 psi | 5076 psi | 5149 psi |
| Main System - Maximum Flow - Implement | - | 73 gal/min | 71 gal/min |
Swing Mechanism |
|||
| Swing Speed | 11.5 r/min | 10.2 r/min | 9.1 r/min |
| Maximum Swing Torque | 77370 ft·lbf | 32560 ft·lbf | 28860 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 125.2 gal (US) | - | - |
| Cooling System | 6.6 gal (US) | 6.3 gal (US) | 6.3 gal (US) |
| Engine Oil | 6.6 gal (US) | - | - |
| Swing Drive - Each | 2.6 gal (US) | - | - |
| Final Drive - Each | 1.5 gal (US) | - | - |
| Hydraulic System - Including Tank | 81.9 gal (US) | 68.7 gal (US) | 58.1 gal (US) |
| Hydraulic Tank | 38.8 gal (US) | 31.7 gal (US) | 23.8 gal (US) |
| DEF Tank | 10.8 gal (US) | - | - |
| Final Drive | - | 0.7 gal (US) | 0.6 gal (US) |
| Fuel Tank | - | 92.5 gal (US) | 77.9 gal (US) |
| Diesel Exhaust Fluid (DEF) | - | - | 5.3 gal (US) |
Dimensions |
|||
| Boom | Reach 6.15 m (20'2") | 5205 mm (17' 1") | 5m (16' 6") |
| Stick | Reach 3.2 m (10'6") | 2.5 m (8' 2") | 2.2m (7' 3") |
| Bucket | HD 1.54 m³ (2.01 yd³) | GD 0.8 m3 (1.05 yd3) | 0.76m3 (.78 yd3) |
| Shipping Height - Top of Cab | 10 ft | 10.5 ft | 3315 ft |
| Handrail Height | 10 ft | - | - |
| Shipping Length | 34.2 ft | 8630 ft | 26.9 ft |
| Tail Swing Radius | 10.3 ft | 7.7 ft | 7.1 ft |
| Counterweight Clearance | 3.7 ft | 4.3 ft | 4.1 ft |
| Ground Clearance | 1.6 ft | 1.3 ft | 1.1 ft |
| Track Length | 15.11 ft | - | - |
| Length to Center of Rollers | 13.1 ft | - | - |
| Track Gauge | 8.6 ft | - | - |
| Transport Width | 10.5 ft | - | - |
| Support Point | - | 12.7 ft | - |
| Undercarriage Length | - | 16.3 ft | 16.1 ft |
| Wheel Base | - | 8.4 ft | 8.2 ft |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | - |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Sustainability |
|||
| Recyclability | 97% | - | 91% |
Machine Weight |
|||
| Operating Weight Maximum | - | 36400 lb | 39683 lb |
| Note (1) | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. |
| Operating Weight Minimum | - | - | 33069 lb |
Drive |
|||
| Maximum Travel Speed | - | 21.7 mile/h | 23 mile/h |
Working Ranges and Forces |
|||
| Boom Type | - | VA Boom | VA Boom |
| Bucket | - | GD 0.8 m3 (1.05 yd3) | 0.76m3 (0.99 y3) GD |
| Stick | - | R2.5 (8' 2") | R2.2CB (7' 3") |
| Cutting Height | - | 33.2 ft | - |
| Reach at Ground Level | - | 29.4 ft | 28.4 ft |
| Vertical Wall Digging Depth | - | 14.5 mm | 13.9 ft |
| Digging Height | - | 18.5 ft | 17.4 ft |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a |
| Dump Height | - | - | 23 ft |
Add a Similar Product:
-
M322 Add
-
M319 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
374 Hydraulic Excavator Add