Compare Equipment Go Back
 330 GC Excavator | 30 Ton Excavator / Digger |
 352 UHD Ultra High Demolition Hydraulic Excavator |
 374 Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 201 HP | 424 HP | 484 HP |
| Net Power - ISO 9249 (DIN) | 204 hp (metric) | 430 hp (metric) | 491 hp (metric) |
| Engine Model | Cat C7.1 | Cat C13 | Cat C15 |
| Engine Power - ISO 14396 | 202 HP | 425 HP | 485 HP |
| Engine Power - ISO 14396 (DIN) | 205 hp (metric) | 431 hp (metric) | 492 hp (metric) |
| Bore | 4 in | 5 in | 5.4 in |
| Stroke | 5 in | 6 in | 6.7 in |
| Displacement | 428 in³ | 763 in³ | 928 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 68100 lb | 143300 lb | 162900 lb |
| Note | Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight. | - | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
| Note (1) | - | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. | - |
| Machine Weight - Retrofit Configuration | - | 139300 lb | - |
| Note (3) | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. | - |
| UHD in Cradle | - | 26000 lb | - |
| Retrofit Boom in Cradle - R3.9 TB Stick | - | 16310 lb | - |
| Retrofit Boom in Cradle - R3.35 TB Stick | - | 15950 lb | - |
| Retrofit Boom in Cradle - R2.9 TB Stick | - | 15760 lb | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 23.8 ft | - | 28.1 ft |
| Boom | Reach 6.15 m (20'2") | - | Reach 7.8m (25'7") |
| Stick | Reach 3.2 m (10'6") | - | R3.6m (11'10") |
| Bucket | HD 1.54 m³ (2.01 yd³) | - | SD 3.3 m³ (4.32 yd³) |
| Maximum Reach at Ground Level | 35.1 ft | - | 43.2 ft |
| Maximum Cutting Height | 32.9 ft | - | 41.2 ft |
| Maximum Loading Height | 22.8 ft | - | 27.7 ft |
| Minimum Loading Height | 7.5 ft | - | 10.1 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 23.3 ft | - | 27.8 ft |
| Maximum Vertical Wall Digging Depth | 19.8 ft | - | 22.8 ft |
| Bucket Digging Force - ISO | 40200 lbf | - | 80550 ft·lbf |
| Stick Digging Force - ISO | 28300 lbf | - | 66390 ft·lbf |
Hydraulic System |
|||
| Main System - Maximum Flow | 560 L/min (148 gal/min) | 779 l/min (206 gal/min) | - |
| Maximum Pressure - Equipment | 5075 psi | 5076 psi | 5366 psi |
| Maximum Pressure - Travel | 5075 psi | 5076 psi | 5076 psi |
| Maximum Pressure - Swing | 4120 psi | 3771 psi | 5076 psi |
| Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | 5511 psi |
| Main System - Maximum Flow - Implement | - | - | 237 gal/min |
Swing Mechanism |
|||
| Swing Speed | 11.5 r/min | 8.44 r/min | 6.34 r/min |
| Maximum Swing Torque | 77370 ft·lbf | 139000 ft·lbf | 220000 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 125.2 gal (US) | 188.9 gal (US) | 243 gal (US) |
| Cooling System | 6.6 gal (US) | 13.7 gal (US) | 19 gal (US) |
| Engine Oil | 6.6 gal (US) | 10.6 gal (US) | 16 gal (US) |
| Swing Drive - Each | 2.6 gal (US) | 2.8 gal (US) | - |
| Final Drive - Each | 1.5 gal (US) | 2.5 gal (US) | 9 gal (US) |
| Hydraulic System - Including Tank | 81.9 gal (US) | 145.3 gal (US) | 164 gal (US) |
| Hydraulic Tank | 38.8 gal (US) | 57.3 gal (US) | 86 gal (US) |
| DEF Tank | 10.8 gal (US) | 12.2 gal (US) | 21 gal (US) |
| Swing Drive | - | - | 5 gal (US) |
Dimensions |
|||
| Boom | Reach 6.15 m (20'2") | - | Reach 7.8m (25'7") |
| Stick | Reach 3.2 m (10'6") | - | R3.6m (11'10") |
| Bucket | HD 1.54 m³ (2.01 yd³) | - | SD 3.3 m³ (4.32 yd³) |
| Shipping Height - Top of Cab | 10 ft | 11.1 ft | 11.8 ft |
| Handrail Height | 10 ft | - | 13 ft |
| Shipping Length | 34.2 ft | 61.8 ft | 44.9 ft |
| Tail Swing Radius | 10.3 ft | 12.3 ft | 13.8 ft |
| Counterweight Clearance | 3.7 ft | 4.7 ft | 4.1 ft |
| Ground Clearance | 1.6 ft | 1.7 ft | 2.6 ft |
| Track Length | 15.11 ft | 18.9 ft | 19.3 ft |
| Length to Center of Rollers | 13.1 ft | - | - |
| Track Gauge | 8.6 ft | - | 11.2 ft |
| Transport Width | 10.5 ft | 10.7 ft | 11.1 ft |
| Note (1) | - | 28 m (91'10") UHD Front | - |
| Cab Height - With OPG | - | 11.8 ft | - |
| Track Length to Center of Rollers | - | 15.6 ft | 15.5 ft |
| Working Gauge - Extended Position | - | 11.2 ft | - |
| Shipping Gauge - Retracted Position | - | 7.9 ft | - |
| Machine Length - without Front, with Counterweight | - | 25.5 ft | - |
| Machine Length - without Front and Counterweight | - | 24.9 ft | - |
| Track Width - Extended | - | 13.1 ft | - |
| Track Width - Retracted | - | 9.8 ft | - |
| Note (2) | - | 600 mm (24") Track Shoes | - |
| Note | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Sustainability |
|||
| Recyclability | 97% | - | - |
Working Ranges and Forces |
|||
| Maximum Pin Height at Stick Nose | - | 90.8 ft | - |
| Maximum Weight at Stick Nose | - | 8157 lb | - |
| Maximum Working Pin Height at Stick Nose - 1/2 | - | 75.2 ft | - |
| Maximum Working Reach at Stick Nose - 1/2 | - | 45.4 ft | - |
| Maximum Height at Stick Nose in Max Reach Position | - | 52.9 ft | - |
| Maximum Reach at Stick Nose | - | 51.7 ft | - |
| Note (1) | - | 28 m (91' 10") UHD Front Over-the-Front | - |
Swing Mechanism - UHD Fronts |
|||
| Swing Speed | - | 4.22 r/min | - |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
| Note 1 | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) | - |
| Bucket | - | GD 3.08 m³ (4.03 yd³) | - |
| Maximum Pin Height at Stick Nose | - | 39.8 ft | - |
| Maximum Weight at Stick Nose | - | 13190 lb | - |
| Maximum Height at Stick Nose in Max Reach Position | - | 7.7 ft | - |
| Maximum Reach at Stick Nose | - | 36.5 ft | - |
| Maximum Digging Depth | - | 17 ft | - |
| Maximum Reach - Ground Level | - | 41.9 ft | - |
| Maximum Loading Height | - | 33.6 ft | - |
| Minimum Loading Height | - | 15 ft | - |
| Bucket Digging Force - ISO | - | 60250 lbf | - |
| Stick Digging Force - ISO | - | 44740 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
| Note 1 | - | Bent - R3.35 m (11'0") Stick | - |
| Bucket | - | GD 3.08 m³ (4.03 yd³) | - |
| Maximum Digging Depth | - | 21.9 ft | - |
| Maximum Reach - Ground Level | - | 39 ft | - |
| Maximum Cutting Height | - | 35.1 ft | - |
| Maximum Loading Height | - | 24.6 ft | - |
| Minimum Loading Height | - | 10 ft | - |
| Bucket Digging Force - ISO | - | 60250 lbf | - |
| Stick Digging Force - ISO | - | 44740 lbf | - |
Add a Similar Product:
