Compare Equipment Go Back
 326 Hydraulic Excavator |
 340 UHD Ultra High Demolition Hydraulic Excavator |
 395 Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 201 HP | 346 HP | 542 HP |
| Net Power - ISO 9249 (DIN) | 204 hp (metric) | 352 hp (metric) | 550 hp (metric) |
| Engine Model | Cat C7.1 | Cat C9.3B | Cat C18 |
| Engine Power - ISO 14396 | 202 HP | 347 HP | 543 HP |
| Engine Power - ISO 14396 (DIN) | 205 hp (metric) | 351 hp (metric) | 551 hp (metric) |
| Bore | 4 in | 5 in | 6 in |
| Stroke | 5 in | 6 in | 7 in |
| Displacement | 428 in³ | 568 in³ | 1105 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 56400 lb | 122600 lb | 207400 lb |
| Note | Long undercarriage, Reach boom, R2.95 m (9'7") stick, 1.54 m³ (2.01 yd³) Heavy Duty (HD) bucket, 600 mm (24") triple grouser shoes and 4600 kg (10,140 lb) counterweight. | - | - |
| Note (1) | - | Hydraulic Variable Gauge undercarriage, 22 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool. | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. |
| Machine Weight - Retrofit Configuration | - | 118600 lb | - |
| Note (2) | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight. | - |
| UHD in Cradle | - | 18700 lb | - |
| Retrofit Boom in Cradle - R3.9 DB Stick | - | 13710 lb | - |
| Retrofit Boom in Cradle - R3.2 DB Stick | - | 13340 lb | - |
| Retrofit Boom in Cradle - R2.8 DB Stick | - | 13120 lb | - |
| 2-piece Retrofit boom in cradle - R3.2 DB stick | - | 17440 lb | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 22.4 ft | - | 31.9 ft |
| Boom | Reach 5.9 m (19'4") | - | GP 8.4m (25'7") |
| Stick | Reach 2.95 m (9'8") | - | R4.4m (14'5") |
| Bucket | HD 1.54 m³ (2.01 yd³) | - | SD 5.2m³ (6.8 yd³) |
| Maximum Reach at Ground Level | 33.2 ft | - | 48.3 ft |
| Maximum Cutting Height | 31.8 ft | - | 44.5 ft |
| Maximum Loading Height | 21.7 ft | - | 30.4 ft |
| Minimum Loading Height | 7.8 ft | - | 9.11 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.8 ft | - | 31.4 ft |
| Maximum Vertical Wall Digging Depth | 17.5 ft | - | 22.3 ft |
| Bucket Digging Force - ISO | 37318 lbf | - | 86100 ft·lbf |
| Stick Digging Force - ISO | 27202 lbf | - | 68540 ft·lbf |
Hydraulic System |
|||
| Main System - Maximum Flow | 481 l/min (127 gal/min) | 560 l/min (148 gal/min) | - |
| Maximum Pressure - Equipment | 5075 psi | 5076 psi | 5366 psi |
| Maximum Pressure - Equipment - Lift Mode | 5510 psi | 5511 psi | - |
| Maximum Pressure - Travel | 5075 psi | 5076 psi | 5076 psi |
| Maximum Pressure - Swing | 4118 psi | 4264 psi | 4496 psi |
| Main System - Maximum Flow - Implement | - | - | 281 gal/min |
Swing Mechanism |
|||
| Swing Speed | 9.9 r/min | 8 r/min | 6.26 r/min |
| Maximum Swing Torque | 78180 ft·lbf | 105000 ft·lbf | 267333 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 125.2 gal (US) | 159 gal (US) | 322 gal (US) |
| Cooling System | 6.6 gal (US) | 11 gal (US) | 19 gal (US) |
| Engine Oil | 6.6 gal (US) | 9 gal (US) | 18 gal (US) |
| Swing Drive | 3 gal (US) | 5 gal (US) | 6 gal (US) |
| Final Drive - Each | 1.2 gal (US) | 2 gal (US) | 5 gal (US) |
| Hydraulic System - Including Tank | 81.9 gal (US) | 145 gal (US) | 196 gal (US) |
| Hydraulic Tank | 38.8 gal (US) | 43 gal (US) | 98 gal (US) |
| DEF Tank | 10.8 gal (US) | 21 gal (US) | 21 gal (US) |
Dimensions |
|||
| Boom | Reach 5.9 m (19'4") | - | GP 8.4m (25'7") |
| Stick | Reach 2.95 m (9'8") | - | R4.4m (14'5") |
| Bucket | HD 1.54 m³ (2.01 yd³) | - | SD 5.2m³ (6.8 yd³) |
| Shipping Height - Top of Cab | 9.8 ft | 11.1 ft | 12 ft |
| Handrail Height | 9.8 ft | - | 12.4 ft |
| Shipping Length | 33 ft | 49.9 ft | 49.6 ft |
| Tail Swing Radius | 9.8 ft | 11.6 ft | 15.11 ft |
| Counterweight Clearance | 1.4 ft | 4.6 ft | 5.5 ft |
| Ground Clearance | 3.5 ft | 1.7 ft | 2.9 ft |
| Track Length | 15.2 ft | 18.9 ft | 20.1 ft |
| Length to Center of Rollers | 12.6 ft | - | - |
| Track Gauge | 8.5 ft | - | 11.6 ft |
| Transport Width | 10.5 ft | 10.7 ft | 12.9 ft |
| Note (1) | - | 22 m (72'2") UHD Front | - |
| Cab Height - With OPG | - | 11.8 ft | - |
| Track Length to Center of Rollers | - | 15.6 ft | 16.1 ft |
| Working Gauge - Extended Position | - | 11.1 ft | - |
| Shipping Gauge - Retracted Position | - | 7.8 ft | - |
| Machine Length - without Front, with Counterweight | - | 23.3 ft | - |
| Machine Length - without Front and Counterweight | - | 22.9 ft | - |
| Track Width - Extended | - | 13.1 ft | - |
| Track Width - Retracted | - | 9.8 ft | - |
| Note (2) | - | 600 mm (24") Track Shoes | - |
| Note | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps |
Air Conditioning System |
|||
| Note (1) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | - |
| Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Sustainability |
|||
| Recyclability | 97% | - | 98% |
Working Ranges and Forces |
|||
| Maximum Pin Height at Stick Nose | - | 72.2 ft | - |
| Maximum Weight at Stick Nose | - | 8160 lb | - |
| Maximum Working Pin Height at Stick Nose - 1/2 | - | 61 ft | - |
| Maximum Working Reach at Stick Nose - 1/2 | - | 38.4 ft | - |
| Maximum Height at Stick Nose in Max Reach Position | - | 41.5 ft | - |
| Maximum Reach at Stick Nose | - | 44.4 ft | - |
| Note (1) | - | 22 m (72' 2") UHD Front (Over-the-Front) | - |
Swing Mechanism - UHD Fronts |
|||
| Swing Speed | - | 4.09 r/min | - |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
| Note 1 | - | Straight - R3.2 m (10' 6") Stick (Over-the-Front) - HVG Undercarriage | - |
| Bucket | - | GD 2.27 m³ (2.97 yd³) | - |
| Maximum Pin Height at Stick Nose | - | 39.8 ft | - |
| Maximum Weight at Stick Nose | - | 9260 lb | - |
| Maximum Height at Stick Nose in Max Reach Position | - | 7.6 ft | - |
| Maximum Reach at Stick Nose | - | 34.8 ft | - |
| Maximum Digging Depth | - | 16.1 ft | - |
| Maximum Reach - Ground Level | - | 39.9 ft | - |
| Maximum Loading Height | - | 34 ft | - |
| Minimum Loading Height | - | 15.7 ft | - |
| Bucket Digging Force - ISO | - | 47160 lbf | - |
| Stick Digging Force - ISO | - | 37300 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
| Note 1 | - | Bent - R3.2DB (10'6") Stick - HVG Undercarriage | - |
| Bucket | - | GD 2.27 m³ (2.97 yd³) | - |
| Maximum Digging Depth | - | 21.4 ft | - |
| Maximum Reach - Ground Level | - | 36.7 ft | - |
| Maximum Cutting Height | - | 35.4 ft | - |
| Maximum Loading Height | - | 24.9 ft | - |
| Minimum Loading Height | - | 10.4 ft | - |
| Bucket Digging Force - ISO | - | 47160 lbf | - |
| Stick Digging Force - ISO | - | 37300 lbf | - |
Add a Similar Product:
-
M322 Add
-
M318 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
M314 Wheeled Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
374 Hydraulic Excavator Add