Compare Equipment Go Back
326 Hydraulic Excavator |
M316 Wheeled Excavator |
M315 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 201 HP | 141 HP | 145 HP | 424 HP |
Net Power - ISO 9249 (DIN) | 204 hp (metric) | 143 hp (metric) | 147 hp (metric) | 429.9 hp (metric) |
Engine Model | Cat C7.1 | Cat C4.4 | C4.4 | Cat C13 |
Engine Power - ISO 14396 | 202 HP | 148 HP | 148 HP | 425 HP |
Engine Power - ISO 14396 (DIN) | 205 hp (metric) | 150 hp (metric) | 150 hp (metric) | 431 hp (metric) |
Bore | 4 in | 4 ft | 4.1 in | 5 in |
Stroke | 5 in | - | 127 mm | 6 in |
Displacement | 428 in³ | 268.5 in³ | 268.5 in³ | 763 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 56400 lb | - | - | 128800 lb |
Note | Long undercarriage, Reach boom, R2.95 m (9'7") stick, 1.54 m³ (2.01 yd³) Heavy Duty (HD) bucket, 600 mm (24") triple grouser shoes and 4600 kg (10,140 lb) counterweight. | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Working Ranges & Forces |
||||
Maximum Digging Depth | 22.4 ft | - | - | 42.8 ft |
Boom | Reach 5.9 m (19'4") | - | - | LRE Boom 11.5 m (37'9") |
Stick | Reach 2.95 m (9'8") | - | - | LRE Stick 8.5 m (27'11') |
Bucket | HD 1.54 m³ (2.01 yd³) | - | - | HD 1.19 m³ (1.56 yd³) |
Maximum Reach at Ground Level | 33.2 ft | - | - | 64.4 ft |
Maximum Cutting Height | 31.8 ft | - | - | 48.2 ft |
Maximum Loading Height | 21.7 ft | - | - | 39.4 ft |
Minimum Loading Height | 7.8 ft | - | - | 7.3 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.8 ft | - | - | 42.5 ft |
Maximum Vertical Wall Digging Depth | 17.5 ft | - | - | - |
Bucket Digging Force - ISO | 37318 lbf | - | - | 31700 lbf |
Stick Digging Force - ISO | 27202 lbf | - | - | 23380 lbf |
Hydraulic System |
||||
Main System - Maximum Flow | 481 l/min (127 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | 5076 psi | - | 5076 psi |
Maximum Pressure - Equipment - Lift Mode | 5510 psi | - | - | 5511 psi |
Maximum Pressure - Travel | 5075 psi | 5076 psi | - | 5076 psi |
Maximum Pressure - Swing | 4118 psi | 5076 psi | - | 3771 psi |
Main System - Maximum Flow - Implement | - | 73 gal/min | 73 gal/min | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | - |
Maximum Flow - Main System | - | - | - | 206 gal/min |
Swing Mechanism |
||||
Swing Speed | 9.9 r/min | 10.2 r/min | 9.1 r/min | - |
Maximum Swing Torque | 78180 ft·lbf | 32560 ft·lbf | 30340 ft·lbf | 138000 ft·lbf |
Service Refill Capacities |
||||
Fuel Tank Capacity | 125.2 gal (US) | - | - | 188.9 gal (US) |
Cooling System | 6.6 gal (US) | 6.3 gal (US) | 24 l | 13.7 gal (US) |
Engine Oil | 6.6 gal (US) | - | - | - |
Swing Drive | 3 gal (US) | - | - | 2.8 gal (US) |
Final Drive - Each | 1.2 gal (US) | - | - | 2.5 gal (US) |
Hydraulic System - Including Tank | 81.9 gal (US) | 68.7 gal (US) | 58.1 gal (US) | 145.3 gal (US) |
Hydraulic Tank | 38.8 gal (US) | 31.7 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
DEF Tank | 10.8 gal (US) | - | - | 12.2 gal (US) |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank | - | 92.5 gal (US) | 74 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | - | 5.3 gal (US) | - |
Engine Oil - With Filter | - | - | - | 10.6 gal (US) |
Dimensions |
||||
Boom | Reach 5.9 m (19'4") | 5205 mm (17' 1") | VA 5.2 m (17'1") | LRE Boom 11.5 m (37'9") |
Stick | Reach 2.95 m (9'8") | 2.5 m (8' 2") | 2.5m (8'2") | LRE Stick 8.5 m (27'11') |
Bucket | HD 1.54 m³ (2.01 yd³) | GD 0.8 m3 (1.05 yd3) | GD 0.76 m³ (0.99 yd³ ) | HD 1.19 m³ (1.56 yd³) |
Shipping Height - Top of Cab | 9.8 ft | 10.5 ft | 10.9 ft | 11.1 ft |
Handrail Height | 9.8 ft | - | - | 11.6 ft |
Shipping Length | 33 ft | 8630 ft | 25.1 ft | 54 ft |
Tail Swing Radius | 9.8 ft | 7.7 ft | 5.9 ft | 12.3 ft |
Counterweight Clearance | 1.4 ft | 4.3 ft | 4.2 ft | 4.7 ft |
Ground Clearance | 3.5 ft | 1.3 ft | 1.5 ft | 2.3 ft |
Track Length | 15.2 ft | - | - | 17.6 ft |
Length to Center of Rollers | 12.6 ft | - | - | - |
Track Gauge | 8.5 ft | - | - | 10.6 ft |
Transport Width | 10.5 ft | - | - | 13.6 ft |
Support Point | - | 12.7 ft | 10.1 ft | - |
Undercarriage Length | - | 16.3 ft | 16 ft | - |
Wheel Base | - | 8.4 ft | 8.4 ft | - |
Track Length to Center of Rollers | - | - | - | 14.2 ft |
Air Conditioning System |
||||
Note (1) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | - | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
Air Conditioning | - | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Sustainability |
||||
Recyclability | 97% | - | - | - |
Machine Weight |
||||
Operating Weight Maximum | - | 36400 lb | 39680 lb | - |
Note (1) | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | - |
Operating Weight Minimum | - | - | 34610 lb | - |
Drive |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | VA 5.2 m (17'1") | - |
Bucket | - | GD 0.8 m3 (1.05 yd3) | GD 0.76 m³ (0.99 yd³ ) | - |
Stick | - | R2.5 (8' 2") | 2.5m (8'2") | - |
Cutting Height | - | 33.2 ft | - | - |
Reach at Ground Level | - | 29.4 ft | 29.6 ft | - |
Vertical Wall Digging Depth | - | 14.5 mm | 15 ft | - |
Digging Height | - | 18.5 ft | 18.4 ft | - |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | - | - |
Dump Height | - | - | 25.2 ft | - |
Stick Forces (ISO) | - | - | 15961 lbf | - |
Bucket Forces (ISO) | - | - | 23830 lbf | - |
Transmission |
||||
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | - | 6.2 mile/h | - |
Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h | - |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | - |
Drawbar Pull | - | - | 23380 lbf | - |
working Ranges and Forces |
||||
Cutting Height | - | - | 34.2 ft | - |
Add a Similar Product: