Compare Equipment Go Back
320 Hydraulic Excavator |
M316 Wheeled Excavator |
395 Excavator |
M319 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 172 HP | 141 HP | 542 HP | 171 HP |
Net Power - ISO 9249 (DIN) | 175 hp (metric) | 143 hp (metric) | 550 hp (metric) | 174 hp (metric) |
Engine Model | Cat C4.4 | Cat C4.4 | Cat C18 | C4.4 |
Engine Power - ISO 14396 | 174 HP | 148 HP | 543 HP | 174 HP |
Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 150 hp (metric) | 551 hp (metric) | 176 hp (metric) |
Bore | 4 in | 4 ft | 6 in | 4.1 in |
Stroke | 5 in | - | 7 in | 127 mm |
Displacement | 269 in³ | 268.5 in³ | 1105 in³ | 268.5 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 49800 lb | - | 207400 lb | - |
Note | Reach boom, R2.9 (9'6") stick, Heavy Duty (HD) 1.19 m ³ (1.56 yd³) bucket 790 mm (31") triple grouser shoes, 4200 kg (10,400 lb) counterweight. | - | - | - |
Note (1) | - | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 22 ft | - | 31.9 ft | - |
Boom | Reach 5.7 m (18'8") | - | GP 8.4m (25'7") | - |
Stick | Reach 2.9 m (9'6") | - | R4.4m (14'5") | - |
Bucket | 1.19 m ³ (1.56 yd³) | - | SD 5.2m³ (6.8 yd³) | - |
Maximum Reach at Ground Level | 32.3 ft | - | 48.3 ft | - |
Maximum Cutting Height | 30.7 ft | - | 44.5 ft | - |
Maximum Loading Height | 21.3 ft | - | 30.4 ft | - |
Minimum Loading Height | 7.1 ft | - | 9.11 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.5 ft | - | 31.4 ft | - |
Maximum Vertical Wall Digging Depth | 17 ft | - | 22.3 ft | - |
Bucket Digging Force - ISO | 38811 lbf | - | 86100 ft·lbf | - |
Stick Digging Force - ISO | 23911 lbf | - | 68540 ft·lbf | - |
Hydraulic System |
||||
Main System - Maximum Flow | 429 l/min (113 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | 5076 psi | 5366 psi | - |
Maximum Pressure - Travel | 4974 psi | 5076 psi | 5076 psi | - |
Maximum Pressure - Swing | 3988 psi | 5076 psi | 4496 psi | - |
Main System - Maximum Flow - Implement | - | 73 gal/min | 281 gal/min | 67 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Swing Mechanism |
||||
Maximum Swing Torque | 60300 ft·lbf | 32560 ft·lbf | 267333 ft·lbf | 32560 ft·lbf |
Swing Speed | - | 10.2 r/min | 6.26 r/min | 9.4 r/min |
Service Refill Capacities |
||||
Fuel Tank Capacity | 86.6 gal (US) | - | 322 gal (US) | - |
Cooling System | 6.6 gal (US) | 6.3 gal (US) | 19 gal (US) | 35 l |
Engine Oil | 4 gal (US) | - | 18 gal (US) | - |
Swing Drive - Each | 1.6 gal (US) | - | - | - |
Final Drive - Each | 1.1 gal (US) | - | 5 gal (US) | - |
Hydraulic System - Including Tank | 61.8 gal (US) | 68.7 gal (US) | 196 gal (US) | 74 gal (US) |
Hydraulic Tank | 30.4 gal (US) | 31.7 gal (US) | 98 gal (US) | 31.7 gal (US) |
DEF Tank | 10.3 gal (US) | - | 21 gal (US) | - |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank | - | 92.5 gal (US) | - | 76.6 gal (US) |
Swing Drive | - | - | 6 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | - | - | 5.3 gal (US) |
Dimensions |
||||
Boom | Reach 5.7 m (18'8") | 5205 mm (17' 1") | GP 8.4m (25'7") | VA 5.2 m (17'1") |
Stick | Reach 2.9 m (9'6") | 2.5 m (8' 2") | R4.4m (14'5") | 2.5m (8'2") |
Bucket | 1.19 m ³ (1.56 yd³) | GD 0.8 m3 (1.05 yd3) | SD 5.2m³ (6.8 yd³) | GD 0.91 m³ (1.19 yd³ ) |
Shipping Height - Top of Cab | 9.7 ft | 10.5 ft | 12 ft | 10.7 ft |
Handrail Height | 9.7 ft | - | 12.4 ft | - |
Shipping Length | 31.3 ft | 8630 ft | 49.6 ft | 26.6 ft |
Tail Swing Radius | 9.3 ft | 7.7 ft | 15.11 ft | 6.25 ft |
Counterweight Clearance | 3.4 ft | 4.3 ft | 5.5 ft | 4.25 ft |
Ground Clearance | 1.5 ft | 1.3 ft | 2.9 ft | 1.4 ft |
Track Length | 14.6 ft | - | 20.1 ft | - |
Length to Center of Rollers | 11.7 ft | - | - | - |
Track Gauge | 7.8 ft | - | 11.6 ft | - |
Transport Width | 9.8 ft | - | 12.9 ft | - |
Support Point | - | 12.7 ft | - | 11.6 ft |
Undercarriage Length | - | 16.3 ft | - | 16.6 ft |
Wheel Base | - | 8.4 ft | - | 8.8 ft |
Track Length to Center of Rollers | - | - | 16.1 ft | - |
Note | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps | - |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Sustainability |
||||
Recyclability | 97% | - | 98% | - |
Machine Weight |
||||
Operating Weight Maximum | - | 36400 lb | - | 46407 lb |
Note (1) | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | - |
Operating Weight Minimum | - | - | - | 41888 lb |
Drive |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | - | VA 5.2 m (17'1") |
Bucket | - | GD 0.8 m3 (1.05 yd3) | - | GD 0.91 m³ (1.19 yd³ ) |
Stick | - | R2.5 (8' 2") | - | 2.5m (8'2") |
Cutting Height | - | 33.2 ft | - | - |
Reach at Ground Level | - | 29.4 ft | - | 30.2 ft |
Vertical Wall Digging Depth | - | 14.5 mm | - | 14.6 ft |
Digging Height | - | 18.5 ft | - | 18.9 ft |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | - | - |
Dump Height | - | - | - | 25.6 ft |
Stick Forces (ISO) | - | - | - | 16861 lbf |
Bucket Forces (ISO) | - | - | - | 26752 lbf |
Transmission |
||||
Maximum Travel Speed | - | - | - | 21.7 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 6.2 mile/h |
Forward/Reverse - 2nd Gear | - | - | - | 21.7 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 23380 lbf |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 35.2 ft |
Add a Similar Product:
- M322 Add
- M320 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 352 Hydraulic Excavator Add
- 374 Hydraulic Excavator Add