Compare Equipment Go Back

306 CR Mini Hydraulic Excavator
M320 Wheeled Excavator
340 UHD Ultra High Demolition Hydraulic Excavator

Engine

Net Power 55.9 HP - -
Engine Model Cat C2.4 Turbo C4.4 Cat C9.3B
Displacement 148 in³ 268.5 in³ 568 in³
Bore 3.4 in 4 in 5 in
Stroke 4 in 5.3 in 6 in
Net Power @ 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 55.9 HP - -
Gross Power - ISO 14396 57.9 HP - -
Engine Power - ISO 14396 - 174 HP 347 HP
Engine Power - ISO 14396 (DIN) - 176 hp (metric) 351 hp (metric)
Net Power - ISO 9249 - 171 HP 346 HP
Net Power - ISO 9249 (DIN) - 174 hp (metric) 352 hp (metric)
Biodiesel Capability - Up to B20¹ Up to B20¹
Emissions - Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Weights

Operating Weight 15766 lb - 122600 lb
Minimum Operating Weight with Canopy* 14134 lb - -
Maximum Operating Weight with Canopy** 15633 lb - -
Note (2) **Maximum Weight is based on steel tracks with pads, extra counterweight, operator, full fuel tank, long stick, fixed blade and no bucket. - Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight.
Maximum Operating Weight with Cab** 15766 lb - -
Minimum Operating Weight with Cab* 14266 lb - -
Note (1) *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, fixed blade and no bucket. - Hydraulic Variable Gauge undercarriage, 22 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool.
Machine Weight - Retrofit Configuration - - 118600 lb
UHD in Cradle - - 18700 lb
Retrofit Boom in Cradle - R3.9 DB Stick - - 13710 lb
Retrofit Boom in Cradle - R3.2 DB Stick - - 13340 lb
Retrofit Boom in Cradle - R2.8 DB Stick - - 13120 lb
2-piece Retrofit boom in cradle - R3.2 DB stick - - 17440 lb

Dimensions - Long Stick

Dig Depth 162 in - -
Maximum Blade Height 16 in - -
O/A Track Width 78 in - -
Track Belt/Shoe Width 16 in - -
Tail Swing with Counterweight 58 in - -
Vertical Wall 125 in - -
Boom In Reach 117 in - -
Maximum Blade Depth 24 in - -
Maximum Dig Height 241 in - -
Transport Height 95 in - -
Stick Length 78 in - -
Ground Clearance 12 in - -
Swing Bearing - Height 27 in - -
Width over Upper House 77 in - -
O/A Undercarriage Length 102 in - -
O/A Shipping Length 234 in - -
Cab Height 100 in - -
Maximum Reach 263 in - -
Boom Swing - Left 29 in - -
Tail Swing without Counterweight 53 in - -
Boom Swing - Right 36 in - -
Maximum Dump Clearance 182 in - -
Maximum Reach - Ground Level 257 in - -

Weight Increase from Minimum Configuration

Counterweight 551 lb - -
Long Stick 97 lb - -
Steel Tracks with Pads 827 lb - -
Angle Blade 225 lb - -
XTC Carriage (no tool) 141 lb - -

Travel System

Ground Pressure - Minimum Weight 5.1 psi - -
Ground Pressure - Maximum Weight 5.7 psi - -
Gradeability - Maximum 30 degrees - -
Maximum Traction Force - High Speed 6969 lbf - -
Maximum Traction Force - Low Speed 12589 lbf - -
Travel Speed - High 3.1 mile/h - -
Travel Speed - Low 1.7 mile/h - -

Service Refill Capacities

Cooling System 2.6 gal (US) 8.4 gal (US) 11 gal (US)
Hydraulic System 27.5 gal (US) - -
Hydraulic Tank 14 gal (US) 40.9 gal (US) 43 gal (US)
Engine Oil 2.1 gal (US) - 9 gal (US)
Fuel Tank 34.3 gal (US) 124.2 gal (US) -
Diesel Exhaust Fluid (DEF) - 7.9 gal (US) -
Hydraulic System - Including Tank - 71.3 gal (US) 145 gal (US)
Final Drive - 0.7 gal (US) -
Fuel Tank Capacity - - 159 gal (US)
Swing Drive - - 5 gal (US)
Final Drive - Each - - 2 gal (US)
DEF Tank - - 21 gal (US)

Hydraulic System

Operating Pressure - Travel 3553 psi - -
Auxiliary Circuit - Primary - Flow 24 gal/min - -
Digging Force - Bucket 11578 lbf - -
Auxiliary Circuit - Primary - Pressure 3553 psi - -
Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
Auxiliary Circuit - Secondary - Flow 9 gal/min - -
Operating Pressure - Equipment 3553 psi - -
Auxiliary Circuit - Secondary - Pressure 3553 psi - -
Digging Force - Stick - Standard 6632 lbf - -
Operating Pressure - Swing 3263 psi - -
Digging Force - Stick - Long 5957 lbf - -
Pump Flow at 2,400 rpm 40 gal/min - -
Main System - Maximum Flow - Implement - 81 gal/min -
Maximum Pressure - Equipment - 5366 psi 5076 psi
Maximum Pressure - Swing - 5729 gal/min 4264 psi
Maximum Pressure - Travel - 5076 gal/min 5076 psi
Main System - Maximum Flow - - 560 l/min (148 gal/min)
Maximum Pressure - Equipment - Lift Mode - - 5511 psi

Swing System

Boom Swing - Right 65 degrees - -
Boom Swing - Left 60 degrees - -
Machine Swing Speed 11 r/min - -

Blade

Straight Blade Width 78 in - -
Angle Blade Width 78 in - -
Straight Blade Height 15.4 in - -
Angle Blade Height 15.7 in - -

Sustainability

Recyclability 96% - -

Certification - Cab

Top Guard ISO 10262:1998 (Level II) - -
Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
Tip Over Protective Structure (TOPS) ISO 12117:1997 - -

Sound

Operator Sound Pressure (ISO 6396:2008) 72 dB(A) - -
Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A) - -
Note European Union Directive “2000/14/EC” - -

Dimensions - Standard Stick

Track Belt/Shoe Width 16 in - -
Maximum Reach 248 in - -
Stick Length 62 in - -
Vertical Wall 107 in - -
Swing Bearing - Height 27 in - -
Maximum Reach - Ground Level 241 in - -
Maximum Blade Height 16 in - -
Ground Clearance 12 in - -
Boom In Reach 98 in - -
Boom Swing - Right 36 in - -
Transport Height 69 in - -
Tail Swing with Counterweight 58 in - -
Cab Height 100 in - -
Width over Upper House 77 in - -
Maximum Dump Clearance 170 in - -
Tail Swing without Counterweight 53 in - -
Boom Swing - Left 29 in - -
O/A Undercarriage Length 102 in - -
Maximum Dig Height 230 in - -
Maximum Blade Depth 24 in - -
O/A Track Width 78 in - -
Dig Depth 146 in - -
O/A Shipping Length 235 in - -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1287). The system contains 0.9 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).
Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. -

Machine Weight

Operating Weight Maximum - 46740 lb -
Operating Weight Minimum - 41450 lb -

Transmission

Maximum Travel Speed - 21.7 mile/h -

Dimensions

Boom - 5260 mm (17'3") -
Bucket - 0.98 m³ GD (1.28 yd³) -
Stick - 2.5 m (8' 2") -
Shipping Height - Top of Cab - 11 ft 11.1 ft
Shipping Length - 29.3 ft 49.9 ft
Counterweight Clearance - 4.3 ft 4.6 ft
Ground Clearance - 1.4 ft 1.7 ft
Support Point - 11.8 ft -
Tail Swing Radius - 8.5 ft 11.6 ft
Wheel Base - 8.9 ft -
Note (1) - - 22 m (72'2") UHD Front
Cab Height - With OPG - - 11.8 ft
Track Length - - 18.9 ft
Track Length to Center of Rollers - - 15.6 ft
Working Gauge - Extended Position - - 11.1 ft
Shipping Gauge - Retracted Position - - 7.8 ft
Transport Width - - 10.7 ft
Machine Length - without Front, with Counterweight - - 23.3 ft
Machine Length - without Front and Counterweight - - 22.9 ft
Track Width - Extended - - 13.1 ft
Track Width - Retracted - - 9.8 ft
Note (2) - - 600 mm (24") Track Shoes

Working Ranges and Forces

Boom Type - VA Boom -
Bucket - 0.98 m³ GD (1.28 yd³) -
Stick - 2.5 m (8' 2") -
Reach at Ground Level - 30.5 ft -
Vertical Wall Digging Depth - 13.9 ft -
Cutting Height - 32.6 ft -
Bucket Forces (ISO) - 30799 lbf -
Stick Forces (ISO) - 20682 lbf -
Note (1) - Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). 22 m (72' 2") UHD Front (Over-the-Front)
Maximum Pin Height at Stick Nose - - 72.2 ft
Maximum Weight at Stick Nose - - 8160 lb
Maximum Working Pin Height at Stick Nose - 1/2 - - 61 ft
Maximum Working Reach at Stick Nose - 1/2 - - 38.4 ft
Maximum Height at Stick Nose in Max Reach Position - - 41.5 ft
Maximum Reach at Stick Nose - - 44.4 ft

Swing Mechanism

Swing Speed - 9.2 r/min 8 r/min
Maximum Swing Torque - 37000 ft·lbf 105000 ft·lbf

Swing Mechanism - UHD Fronts

Swing Speed - - 4.09 r/min

Working Ranges and Forces - Retrofit Boom - Straight

Note 1 - - Straight - R3.2 m (10' 6") Stick (Over-the-Front) - HVG Undercarriage
Bucket - - GD 2.27 m³ (2.97 yd³)
Maximum Pin Height at Stick Nose - - 39.8 ft
Maximum Weight at Stick Nose - - 9260 lb
Maximum Height at Stick Nose in Max Reach Position - - 7.6 ft
Maximum Reach at Stick Nose - - 34.8 ft
Maximum Digging Depth - - 16.1 ft
Maximum Reach - Ground Level - - 39.9 ft
Maximum Loading Height - - 34 ft
Minimum Loading Height - - 15.7 ft
Bucket Digging Force - ISO - - 47160 lbf
Stick Digging Force - ISO - - 37300 lbf

Working Ranges and Forces - Retrofit Boom - Bent

Note 1 - - Bent - R3.2DB (10'6") Stick - HVG Undercarriage
Bucket - - GD 2.27 m³ (2.97 yd³)
Maximum Digging Depth - - 21.4 ft
Maximum Reach - Ground Level - - 36.7 ft
Maximum Cutting Height - - 35.4 ft
Maximum Loading Height - - 24.9 ft
Minimum Loading Height - - 10.4 ft
Bucket Digging Force - ISO - - 47160 lbf
Stick Digging Force - ISO - - 37300 lbf
Add a Similar Product:
  • M319 Wheeled Excavator Add
  • M322 Add
  • M316 Wheeled Excavator Add
  • M318 Wheeled Excavator Add
  • M314 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • 352 LRE Long Reach Excavation Hydraulic Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • 395 Excavator Add
  • 374 Hydraulic Excavator Add