CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    306 CR Mini Hydraulic Excavator
    View Product
    352 LRE Long Reach Excavation Hydraulic Excavator
    View Product Remove
    395 Excavator
    View Product Remove

    Engine
    Net Power 55.9 HP - -
    Engine Model Cat C2.4 Turbo Cat C13 Cat C18
    Displacement 148 in³ 763 in³ 1105 in³
    Bore 3.4 in 5 in 6 in
    Stroke 4 in 6 in 7 in
    Net Power @ 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 55.9 HP - -
    Gross Power - ISO 14396 57.9 HP - -
    Net Power - ISO 9249 - 424 HP 542 HP
    Net Power - ISO 9249 (DIN) - 429.9 hp (metric) 550 hp (metric)
    Engine Power - ISO 14396 - 425 HP 543 HP
    Engine Power - ISO 14396 (DIN) - 431 hp (metric) 551 hp (metric)
    Biodiesel Capability - Up to B20¹ B20¹
    Emissions - Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
    Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m
    Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

    Weights
    Operating Weight 15766 lb 128800 lb 207400 lb
    Minimum Operating Weight with Canopy* 14134 lb - -
    Maximum Operating Weight with Canopy** 15633 lb - -
    Note (2) **Maximum Weight is based on steel tracks with pads, extra counterweight, operator, full fuel tank, long stick, fixed blade and no bucket. - -
    Maximum Operating Weight with Cab** 15766 lb - -
    Minimum Operating Weight with Cab* 14266 lb - -
    Note (1) *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, fixed blade and no bucket. - Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device.
    Note - Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. -

    Dimensions - Long Stick
    Dig Depth 162 in - -
    Maximum Blade Height 16 in - -
    O/A Track Width 78 in - -
    Track Belt/Shoe Width 16 in - -
    Tail Swing with Counterweight 58 in - -
    Vertical Wall 125 in - -
    Boom In Reach 117 in - -
    Maximum Blade Depth 24 in - -
    Maximum Dig Height 241 in - -
    Transport Height 95 in - -
    Stick Length 78 in - -
    Ground Clearance 12 in - -
    Swing Bearing - Height 27 in - -
    Width over Upper House 77 in - -
    O/A Undercarriage Length 102 in - -
    O/A Shipping Length 234 in - -
    Cab Height 100 in - -
    Maximum Reach 263 in - -
    Boom Swing - Left 29 in - -
    Tail Swing without Counterweight 53 in - -
    Boom Swing - Right 36 in - -
    Maximum Dump Clearance 182 in - -
    Maximum Reach - Ground Level 257 in - -

    Weight Increase from Minimum Configuration
    Counterweight 551 lb - -
    Long Stick 97 lb - -
    Steel Tracks with Pads 827 lb - -
    Angle Blade 225 lb - -
    XTC Carriage (no tool) 141 lb - -

    Travel System
    Ground Pressure - Minimum Weight 5.1 psi - -
    Ground Pressure - Maximum Weight 5.7 psi - -
    Gradeability - Maximum 30 degrees - -
    Maximum Traction Force - High Speed 6969 lbf - -
    Maximum Traction Force - Low Speed 12589 lbf - -
    Travel Speed - High 3.1 mile/h - -
    Travel Speed - Low 1.7 mile/h - -

    Service Refill Capacities
    Cooling System 2.6 gal (US) 13.7 gal (US) 19 gal (US)
    Hydraulic System 27.5 gal (US) - -
    Hydraulic Tank 14 gal (US) 57.3 gal (US) 98 gal (US)
    Engine Oil 2.1 gal (US) - 18 gal (US)
    Fuel Tank 34.3 gal (US) - -
    Fuel Tank Capacity - 188.9 gal (US) 322 gal (US)
    Engine Oil - With Filter - 10.6 gal (US) -
    Swing Drive - 2.8 gal (US) 6 gal (US)
    Final Drive - Each - 2.5 gal (US) 5 gal (US)
    Hydraulic System - Including Tank - 145.3 gal (US) 196 gal (US)
    DEF Tank - 12.2 gal (US) 21 gal (US)

    Hydraulic System
    Operating Pressure - Travel 3553 psi - -
    Auxiliary Circuit - Primary - Flow 24 gal/min - -
    Digging Force - Bucket 11578 lbf - -
    Auxiliary Circuit - Primary - Pressure 3553 psi - -
    Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
    Auxiliary Circuit - Secondary - Flow 9 gal/min - -
    Operating Pressure - Equipment 3553 psi - -
    Auxiliary Circuit - Secondary - Pressure 3553 psi - -
    Digging Force - Stick - Standard 6632 lbf - -
    Operating Pressure - Swing 3263 psi - -
    Digging Force - Stick - Long 5957 lbf - -
    Pump Flow at 2,400 rpm 40 gal/min - -
    Maximum Flow - Main System - 206 gal/min -
    Maximum Pressure - Equipment - 5076 psi 5366 psi
    Maximum Pressure - Equipment - Lift Mode - 5511 psi -
    Maximum Pressure - Travel - 5076 psi 5076 psi
    Maximum Pressure - Swing - 3771 psi 4496 psi
    Main System - Maximum Flow - Implement - - 281 gal/min

    Swing System
    Boom Swing - Right 65 degrees - -
    Boom Swing - Left 60 degrees - -
    Machine Swing Speed 11 r/min - -

    Blade
    Straight Blade Width 78 in - -
    Angle Blade Width 78 in - -
    Straight Blade Height 15.4 in - -
    Angle Blade Height 15.7 in - -

    Sustainability
    Recyclability 96% - 98%

    Certification - Cab
    Top Guard ISO 10262:1998 (Level II) - -
    Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
    Tip Over Protective Structure (TOPS) ISO 12117:1997 - -

    Sound
    Operator Sound Pressure (ISO 6396:2008) 72 dB(A) - -
    Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A) - -
    Note European Union Directive “2000/14/EC” - -

    Dimensions - Standard Stick
    Track Belt/Shoe Width 16 in - -
    Maximum Reach 248 in - -
    Stick Length 62 in - -
    Vertical Wall 107 in - -
    Swing Bearing - Height 27 in - -
    Maximum Reach - Ground Level 241 in - -
    Maximum Blade Height 16 in - -
    Ground Clearance 12 in - -
    Boom In Reach 98 in - -
    Boom Swing - Right 36 in - -
    Transport Height 69 in - -
    Tail Swing with Counterweight 58 in - -
    Cab Height 100 in - -
    Width over Upper House 77 in - -
    Maximum Dump Clearance 170 in - -
    Tail Swing without Counterweight 53 in - -
    Boom Swing - Left 29 in - -
    O/A Undercarriage Length 102 in - -
    Maximum Dig Height 230 in - -
    Maximum Blade Depth 24 in - -
    O/A Track Width 78 in - -
    Dig Depth 146 in - -
    O/A Shipping Length 235 in - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1287). The system contains 0.9 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

    Working Ranges & Forces
    Maximum Digging Depth - 42.8 ft 31.9 ft
    Boom - LRE Boom 11.5 m (37'9") GP 8.4m (25'7")
    Stick - LRE Stick 8.5 m (27'11') R4.4m (14'5")
    Bucket - HD 1.19 m³ (1.56 yd³) SD 5.2m³ (6.8 yd³)
    Maximum Reach at Ground Level - 64.4 ft 48.3 ft
    Maximum Cutting Height - 48.2 ft 44.5 ft
    Maximum Loading Height - 39.4 ft 30.4 ft
    Minimum Loading Height - 7.3 ft 9.11 ft
    Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 42.5 ft 31.4 ft
    Bucket Digging Force - ISO - 31700 lbf 86100 ft·lbf
    Stick Digging Force - ISO - 23380 lbf 68540 ft·lbf
    Maximum Vertical Wall Digging Depth - - 22.3 ft

    Swing Mechanism
    Maximum Swing Torque - 138000 ft·lbf 267333 ft·lbf
    Swing Speed - - 6.26 r/min

    Dimensions
    Boom - LRE Boom 11.5 m (37'9") GP 8.4m (25'7")
    Stick - LRE Stick 8.5 m (27'11') R4.4m (14'5")
    Bucket - HD 1.19 m³ (1.56 yd³) SD 5.2m³ (6.8 yd³)
    Shipping Height - Top of Cab - 11.1 ft 12 ft
    Handrail Height - 11.6 ft 12.4 ft
    Shipping Length - 54 ft 49.6 ft
    Tail Swing Radius - 12.3 ft 15.11 ft
    Counterweight Clearance - 4.7 ft 5.5 ft
    Ground Clearance - 2.3 ft 2.9 ft
    Track Length - 17.6 ft 20.1 ft
    Track Length to Center of Rollers - 14.2 ft 16.1 ft
    Track Gauge - 10.6 ft 11.6 ft
    Transport Width - 13.6 ft 12.9 ft
    Note - - Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps
    Add a Similar Product:
    • M319 Wheeled Excavator Add
    • M320 Wheeled Excavator Add
    • M322 Add
    • M316 Wheeled Excavator Add
    • M318 Wheeled Excavator Add
    • M315 Wheeled Excavator Add
    • M314 Wheeled Excavator Add
    • 352 UHD Ultra High Demolition Hydraulic Excavator Add
    • 340 UHD Ultra High Demolition Hydraulic Excavator Add
    • 374 Hydraulic Excavator Add