Compare Equipment Go Back
DG125 (Single-phase and 3 phase) (60 Hz) |
CTS Series Automatic Transfer Switch |
|
|
Generator Set Specifications |
|||
---|---|---|---|
Frequency | 60 Hz | - | - |
Gas Standby Rating | 125 ekW | - | - |
Emissions/Fuel Strategy | U.S. EPA Certified for Stationary Emergency and Non-Emergency Application | - | - |
Voltage | 208-600 | - | - |
Speed | 1800 rpm | - | - |
Natural Gas Rating | 125 ekW | - | - |
Engine Specifications |
|||
Engine Model | V8, 6.2L TCAC | - | - |
Bore | 4 in | - | - |
Stroke | 3.75 in | - | - |
Displacement | 378.3 in³ | - | - |
Compression Ratio | 9.8:1 | - | - |
Aspiration | TCAC | - | - |
Fuel System | Electronic | - | - |
Generator Set Dimensions |
|||
Length | 96 in | - | - |
Width | 51 in | - | - |
Height | 57 in | - | - |
Dry Weight - Genset | 3226 lb | - | - |
Technical Summary |
|||
Rating Range | - | 40 to 4000A | - |
Transfer Type | - | Open transition | - |
Switch Type | - | Contactor Based | - |
Electrical Ratings |
|||
Control Power | - | 40 to 4000 amperes, 2, 3 or 4 Poles | - |
Enclosure Capability | - | NEMA 1, 3R, 4, 4X and 12 | - |
System Voltage Application | - | Available to 600 VAC, 50 or 60 Hz | - |
Applicable Testing | - | UL 1008 listed at 480 VAC CSA C22.2 No. 178 certified at 600 VAC IEC 947-6-1 listed through 480 VAC |
- |
Add a Similar Product:
- MX350 Controller Add
- CTX Series Automatic Transfer Switch Add
- MX150 Microprocessor Controller Add
- MX250 Microprocessor Controller Add
- CTSM and CTGM Series Manual Transfer Switches Add
- CTE Series Automatic Transfer Switch Add
- CTG Series Automatic Transfer Switch Add
- CTGSE & CTGDSE Series Service Rated Entrance Rated Automatic Transfer Switch Add
- Cat Customizable Switchgear and Controls Add
- Cat Switchgear Add