Compare Equipment Go Back
 DG100 (60 Hz) |
 MX350 Controller |
|
|
Generator Set Specifications |
|||
|---|---|---|---|
| Frequency | 60 Hz | - | - |
| Gas Standby Rating | 100 ekW | - | - |
| Emissions/Fuel Strategy | U.S. EPA Certified for Stationary Emergency Application | - | - |
| Speed | 1800 rpm | - | - |
| Voltage | 208-600 | - | - |
Engine Specifications |
|||
| Engine Model | V8, 6.2L TCAC | - | - |
| Stroke | 3.75 in | - | - |
| Displacement | 378.3 in³ | - | - |
| Compression Ratio | 9.8:1 | - | - |
| Aspiration | TCAC | - | - |
| Bore | 4 in | - | - |
| Fuel System | Electronic | - | - |
Generator Set Dimensions |
|||
| Length | 96 in | - | - |
| Width | 51 in | - | - |
| Height | 57 in | - | - |
| Dry Weight - Genset | 3007 lb | - | - |
Controller Specifications |
|||
| Voltage Unbalance on Dropout for Source 1 and Source 2 | - | 5 to 20% of nominal | - |
| Delay NeutralTransition Time Delays (DT,DW) | - | 0-10 minutes | - |
| Control Power | - | 120 VAC | - |
| Undervoltage Dropout for Source 1 and Source 2 | - | 75-99% of nominal | - |
| Undervoltage Restore for Source 1 and Source 2 | - | 85-100% of nominal | - |
| Overfrequency Dropout for Source 1 and Source 2 | - | 50.1 - 63 Hz | - |
| Source Sensing | - | 120 - 690 VAC +/- 1% of nominal voltage (+/- .05 Hz, +/-.5 A) | - |
| Delay for Engine Cool Down (U) | - | 0-60 minutes | - |
| Underfrequency Restore for Source 1 and Source 2 | - | 45 - 59.5 Hz | - |
| Load Control Relay Contacts (2) | - | 0-259 minutes | - |
| Overvoltage Dropout for Source 1 and Source 2 | - | 105 - 110% of nominal | - |
| Voltage Unbalance for Restore for Source 1 and Source 2 | - | 4 to 19% of nominal | - |
| Storage Temperature | - | (-40˚C - 90˚C ) | - |
| Underfrequency Dropout for Source 1 and Source 2 | - | 45 - 59.9 Hz | - |
| Overfrequency Restore for Source 1 and Source 2 | - | 50 - 62.9 Hz | - |
| Delay Transfer to Nonpreferred Source (W) | - | 0-5 minutes | - |
| Operating Temperature Ambient | - | (-20˚C to 50˚C) | - |
| Communications Interface - Optional | - | Serial RS-485 upt to 115.2 Kbps or TCP/IP (10/100 base-T) | - |
| Overvoltage Restore for Source 1 and Source 2 | - | 103 - 108% of nominal | - |
| Load Control Relay Contacts (1) | - | rated for 10A @ 24VDC or 120VAC | - |
Technical Summary |
|||
| Rating Range | - | Switch Dependent | - |
| Transfer Type | - | Application Dependent | - |
| Switch Type | - | Application Dependent | - |
Add a Similar Product:
-
MX250 Microprocessor Controller Add
-
CTSM and CTGM Series Manual Transfer Switches Add
-
CTX Series Automatic Transfer Switch Add
-
MX150 Microprocessor Controller Add
-
-
CTS Series Automatic Transfer Switch Add
-
CTE Series Automatic Transfer Switch Add
-
-
Cat XLM Switchgear Add
-
Cat Customizable Switchgear and Controls Add