Compare Equipment Go Back

301.7 CR Mini Hydraulic Excavator
M314 Wheeled Excavator
352 LRE Long Reach Excavation Hydraulic Excavator

Engine

Net Power 21 HP - -
Engine Model C1.1 Cat C3.6 Cat C13
Displacement 69 in³ 221 in³ 763 in³
Note Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. - -
Note (1) Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time
Engine Power 21.6 HP - -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Bore 3 in 3.9 in 5 in
Stroke 3.2 in 5 in 6 in
Engine Power - ISO 14396 - 134 HP 425 HP
Engine Power - ISO 14396 (DIN) - 136 hp (metric) 431 hp (metric)
Net Power - ISO 9249 - 134 HP 424 HP
Net Power - ISO 9249 (DIN) - 129 hp (metric) 429.9 hp (metric)
Biodiesel Capability - Up to B20¹ Up to B20¹
Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Weights

Operating Weight 4222 lb - 128800 lb
Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. - -
Note (1) *Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank. - -
Minimum Operating Weight with Canopy* 3946 lb - -
Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. - -
Maximum Operating Weight with Canopy** 4222 lb - -
EU: CE Plate Weight*** 4167 lb - -
Note - - Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight.

Dimensions - Long Stick

Dig Depth 100 in - -
Tail Swing 25.6 in - -
O/A Shipping Height 90.6 in - -
Maximum Blade Height 10.6 in - -
Minimum Ground Clearance Below Undercarriage 5.5 in - -
Boom Height - Shipping Position 40.9 in - -
Maximum Dump Clearance 98.8 in - -
Track Belt/Shoe Width 9.1 in - -
Track Width - Expanded 51.18 in - -
Maximum Reach - Ground Level 159.8 in - -
Stick Length 45.7 in - -
Vertical Wall 74.4 in - -
Track Width - Retracted 39 in - -
Boom Swing - Right 50 ° - -
Maximum Reach 162.6 in - -
Boom In Reach 63.8 in - -
Overall Shipping Length* 141.3 in - -
Maximum Blade Depth 10.4 in - -
O/A Undercarriage Length 62.6 in - -
Maximum Dig Height 137.4 in - -
Swing Bearing - Height 17.4 in - -
Boom Swing - Left 65 ° - -
Note *Overall Shipping Length depends on blade position during shipment. - -

Blade

Height 8.9 in - -
Width* 39 in - -
Note *Expanded – 1300 mm (51 in) - -

Travel System

Gradeability - Maximum 30 degrees - -
Ground Pressure - Minimum Weight 4 psi - -
Maximum Traction Force - High Speed 2675.2 lbf - -
Travel Speed - High 2.7 mile/h - -
Ground Pressure - Maximum Weight 4.4 psi - -
Travel Speed - Low 1.8 mile/h - -
Maximum Traction Force - Low Speed 4136.5 lbf - -

Service Refill Capacities

Hydraulic System 6.9 gal (US) - -
Fuel Tank 5.8 gal (US) 77.9 gal (US) -
Engine Oil 1.2 gal (US) - -
Hydraulic Tank 4.8 gal (US) 23.8 gal (US) 57.3 gal (US)
Cooling System 1 gal (US) 6.3 gal (US) 13.7 gal (US)
Diesel Exhaust Fluid (DEF) - 5.3 gal (US) -
Final Drive - 0.6 gal (US) -
Hydraulic System - Including Tank - 58.1 gal (US) 145.3 gal (US)
Fuel Tank Capacity - - 188.9 gal (US)
Engine Oil - With Filter - - 10.6 gal (US)
Swing Drive - - 2.8 gal (US)
Final Drive - Each - - 2.5 gal (US)
DEF Tank - - 12.2 gal (US)

Sound

Note European Union Directive “2000/14/EC” - -
Average Exterior Sound Pressure (ISO 6395:2008) 93 dB(A) - -

Dimensions - Standard Stick

Note *Overall Shipping Length depends on blade position during shipment. - -
Track Belt/Shoe Width 9.1 in - -
Track Width - Expanded 51.18 in - -
O/A Undercarriage Length 62.6 in - -
Maximum Reach - Ground Level 153.5 in - -
Boom Height - Shipping Position 42.9 in - -
Maximum Reach 156.3 in - -
Dig Depth 92.5 in - -
Maximum Dump Clearance 96.5 in - -
Maximum Blade Height 10.6 in - -
Tail Swing 25.6 in - -
Boom In Reach 64.2 in - -
Minimum Ground Clearance Below Undercarriage 5.5 in - -
O/A Shipping Height 90.6 in - -
Swing Bearing - Height 17.4 in - -
Stick Length 37.8 in - -
Vertical Wall 70.9 in - -
Boom Swing - Right 50 ° - -
Track Width - Retracted 39 in - -
Maximum Dig Height 135 in - -
Overall Shipping Length* 142.5 in - -
Boom Swing - Left 65 ° - -
Maximum Blade Depth 10.4 in - -

Certification - Canopy

Tip Over Protective Structure (TOPS) ISO 12117:1997 - -
Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
Top Guard ISO 10262:1998 (Level I) - -

Weight Increase from Minimum Configuration

Expandable Undercarriage Standard - -
Steel Tracks 110 lb - -
Long Stick 22 lb - -
Heavy Counterweight 148 lb - -

Hydraulic System

Auxiliary Circuit - Primary - Pressure 3553.4 psi - -
Auxiliary Circuit - Secondary - Pressure 3553.4 psi - -
Auxiliary Circuit - Secondary - Flow 3.7 gal/min - -
Auxiliary Circuit - Primary - Flow 8.7 gal/min - -
Digging Force - Stick - Long 1865.9 lbf - -
Operating Pressure - Equipment 3553.4 psi - -
Operating Pressure - Swing 2132.1 psi - -
Digging Force - Stick - Standard 2135.7 lbf - -
Pump Flow at 2,400 rpm 17.4 gal/min - -
Digging Force - Bucket 3641.9 lbf - -
Operating Pressure - Travel 3553.4 psi - -
Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
Main System - Maximum Flow - Implement - 71 gal/min -
Maximum Pressure - Equipment - 5076 psi 5076 psi
Maximum Pressure - Swing - 5149 psi 3771 psi
Maximum Pressure - Travel - 5076 psi 5076 psi
Maximum Flow - Main System - - 206 gal/min
Maximum Pressure - Equipment - Lift Mode - - 5511 psi

Sustainability

Recyclability 95% 91% -

Swing System

Machine Swing Speed 9.8 r/min - -

Machine Weight

Operating Weight Maximum - 39683 lb -
Note (1) - Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. -
Operating Weight Minimum - 33069 lb -

Drive

Maximum Travel Speed - 23 mile/h -

Swing Mechanism

Maximum Swing Torque - 28860 ft·lbf 138000 ft·lbf
Swing Speed - 9.1 r/min -

Dimensions

Boom - 5m (16' 6") LRE Boom 11.5 m (37'9")
Bucket - 0.76m3 (.78 yd3) HD 1.19 m³ (1.56 yd³)
Stick - 2.2m (7' 3") LRE Stick 8.5 m (27'11')
Counterweight Clearance - 4.1 ft 4.7 ft
Ground Clearance - 1.1 ft 2.3 ft
Shipping Height - Top of Cab - 3315 ft 11.1 ft
Shipping Length - 26.9 ft 54 ft
Tail Swing Radius - 7.1 ft 12.3 ft
Undercarriage Length - 16.1 ft -
Wheel Base - 8.2 ft -
Handrail Height - - 11.6 ft
Track Length - - 17.6 ft
Track Length to Center of Rollers - - 14.2 ft
Track Gauge - - 10.6 ft
Transport Width - - 13.6 ft

Working Ranges and Forces

Boom Type - VA Boom -
Bucket - 0.76m3 (0.99 y3) GD -
Stick - R2.2CB (7' 3") -
Digging Height - 17.4 ft -
Dump Height - 23 ft -
Reach at Ground Level - 28.4 ft -
Vertical Wall Digging Depth - 13.9 ft -
Note (1) - Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a -

Air Conditioning System

Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. -
Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

Working Ranges & Forces

Maximum Digging Depth - - 42.8 ft
Boom - - LRE Boom 11.5 m (37'9")
Stick - - LRE Stick 8.5 m (27'11')
Bucket - - HD 1.19 m³ (1.56 yd³)
Maximum Reach at Ground Level - - 64.4 ft
Maximum Cutting Height - - 48.2 ft
Maximum Loading Height - - 39.4 ft
Minimum Loading Height - - 7.3 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - - 42.5 ft
Bucket Digging Force - ISO - - 31700 lbf
Stick Digging Force - ISO - - 23380 lbf
Add a Similar Product:
  • M319 Wheeled Excavator Add
  • M320 Wheeled Excavator Add
  • M322 Add
  • M316 Wheeled Excavator Add
  • M318 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add
  • 374 Hydraulic Excavator Add
  • 395 Excavator Add