Compare Equipment Go Back

301.7 CR Mini Hydraulic Excavator
374 Hydraulic Excavator

Engine

Net Power 21 HP - -
Engine Model C1.1 Cat C15 -
Displacement 69 in³ 928 in³ -
Note Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. - -
Note (1) Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of -
Engine Power 21.6 HP - -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. -
Bore 3 in 5.4 in -
Stroke 3.2 in 6.7 in -
Net Power - ISO 9249 - 484 HP -
Net Power - ISO 9249 (DIN) - 491 hp (metric) -
Engine Power - ISO 14396 - 485 HP -
Engine Power - ISO 14396 (DIN) - 492 hp (metric) -
Biodiesel Capability - Up to B20¹ -
Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO -

Weights

Operating Weight 4222 lb 162900 lb -
Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. - -
Note (1) *Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank. - -
Minimum Operating Weight with Canopy* 3946 lb - -
Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. - -
Maximum Operating Weight with Canopy** 4222 lb - -
EU: CE Plate Weight*** 4167 lb - -
Note - Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. -

Dimensions - Long Stick

Dig Depth 100 in - -
Tail Swing 25.6 in - -
O/A Shipping Height 90.6 in - -
Maximum Blade Height 10.6 in - -
Minimum Ground Clearance Below Undercarriage 5.5 in - -
Boom Height - Shipping Position 40.9 in - -
Maximum Dump Clearance 98.8 in - -
Track Belt/Shoe Width 9.1 in - -
Track Width - Expanded 51.18 in - -
Maximum Reach - Ground Level 159.8 in - -
Stick Length 45.7 in - -
Vertical Wall 74.4 in - -
Track Width - Retracted 39 in - -
Boom Swing - Right 50 ° - -
Maximum Reach 162.6 in - -
Boom In Reach 63.8 in - -
Overall Shipping Length* 141.3 in - -
Maximum Blade Depth 10.4 in - -
O/A Undercarriage Length 62.6 in - -
Maximum Dig Height 137.4 in - -
Swing Bearing - Height 17.4 in - -
Boom Swing - Left 65 ° - -
Note *Overall Shipping Length depends on blade position during shipment. - -

Blade

Height 8.9 in - -
Width* 39 in - -
Note *Expanded – 1300 mm (51 in) - -

Travel System

Gradeability - Maximum 30 degrees - -
Ground Pressure - Minimum Weight 4 psi - -
Maximum Traction Force - High Speed 2675.2 lbf - -
Travel Speed - High 2.7 mile/h - -
Ground Pressure - Maximum Weight 4.4 psi - -
Travel Speed - Low 1.8 mile/h - -
Maximum Traction Force - Low Speed 4136.5 lbf - -

Service Refill Capacities

Hydraulic System 6.9 gal (US) - -
Fuel Tank 5.8 gal (US) - -
Engine Oil 1.2 gal (US) 16 gal (US) -
Hydraulic Tank 4.8 gal (US) 86 gal (US) -
Cooling System 1 gal (US) 19 gal (US) -
Fuel Tank Capacity - 243 gal (US) -
Swing Drive - 5 gal (US) -
Final Drive - Each - 9 gal (US) -
Hydraulic System - Including Tank - 164 gal (US) -
DEF Tank - 21 gal (US) -

Sound

Note European Union Directive “2000/14/EC” - -
Average Exterior Sound Pressure (ISO 6395:2008) 93 dB(A) - -

Dimensions - Standard Stick

Note *Overall Shipping Length depends on blade position during shipment. - -
Track Belt/Shoe Width 9.1 in - -
Track Width - Expanded 51.18 in - -
O/A Undercarriage Length 62.6 in - -
Maximum Reach - Ground Level 153.5 in - -
Boom Height - Shipping Position 42.9 in - -
Maximum Reach 156.3 in - -
Dig Depth 92.5 in - -
Maximum Dump Clearance 96.5 in - -
Maximum Blade Height 10.6 in - -
Tail Swing 25.6 in - -
Boom In Reach 64.2 in - -
Minimum Ground Clearance Below Undercarriage 5.5 in - -
O/A Shipping Height 90.6 in - -
Swing Bearing - Height 17.4 in - -
Stick Length 37.8 in - -
Vertical Wall 70.9 in - -
Boom Swing - Right 50 ° - -
Track Width - Retracted 39 in - -
Maximum Dig Height 135 in - -
Overall Shipping Length* 142.5 in - -
Boom Swing - Left 65 ° - -
Maximum Blade Depth 10.4 in - -

Certification - Canopy

Tip Over Protective Structure (TOPS) ISO 12117:1997 - -
Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
Top Guard ISO 10262:1998 (Level I) - -

Weight Increase from Minimum Configuration

Expandable Undercarriage Standard - -
Steel Tracks 110 lb - -
Long Stick 22 lb - -
Heavy Counterweight 148 lb - -

Hydraulic System

Auxiliary Circuit - Primary - Pressure 3553.4 psi - -
Auxiliary Circuit - Secondary - Pressure 3553.4 psi - -
Auxiliary Circuit - Secondary - Flow 3.7 gal/min - -
Auxiliary Circuit - Primary - Flow 8.7 gal/min - -
Digging Force - Stick - Long 1865.9 lbf - -
Operating Pressure - Equipment 3553.4 psi - -
Operating Pressure - Swing 2132.1 psi - -
Digging Force - Stick - Standard 2135.7 lbf - -
Pump Flow at 2,400 rpm 17.4 gal/min - -
Digging Force - Bucket 3641.9 lbf - -
Operating Pressure - Travel 3553.4 psi - -
Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
Main System - Maximum Flow - Implement - 237 gal/min -
Maximum Pressure - Equipment - 5366 psi -
Maximum Pressure - Equipment - Lift Mode - 5511 psi -
Maximum Pressure - Travel - 5076 psi -
Maximum Pressure - Swing - 5076 psi -

Sustainability

Recyclability 95% - -

Swing System

Machine Swing Speed 9.8 r/min - -

Working Ranges & Forces

Maximum Digging Depth - 28.1 ft -
Boom - Reach 7.8m (25'7") -
Stick - R3.6m (11'10") -
Bucket - SD 3.3 m³ (4.32 yd³) -
Maximum Reach at Ground Level - 43.2 ft -
Maximum Cutting Height - 41.2 ft -
Maximum Loading Height - 27.7 ft -
Minimum Loading Height - 10.1 ft -
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 27.8 ft -
Maximum Vertical Wall Digging Depth - 22.8 ft -
Bucket Digging Force - ISO - 80550 ft·lbf -
Stick Digging Force - ISO - 66390 ft·lbf -

Swing Mechanism

Swing Speed - 6.34 r/min -
Maximum Swing Torque - 220000 ft·lbf -

Dimensions

Boom - Reach 7.8m (25'7") -
Stick - R3.6m (11'10") -
Bucket - SD 3.3 m³ (4.32 yd³) -
Shipping Height - Top of Cab - 11.8 ft -
Handrail Height - 13 ft -
Shipping Length - 44.9 ft -
Tail Swing Radius - 13.8 ft -
Counterweight Clearance - 4.1 ft -
Ground Clearance - 2.6 ft -
Track Length - 19.3 ft -
Track Length to Center of Rollers - 15.5 ft -
Track Gauge - 11.2 ft -
Transport Width - 11.1 ft -
Note - Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps -

Air Conditioning System

Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). -
Add a Similar Product:
  • M320 Wheeled Excavator Add
  • M322 Add
  • M318 Wheeled Excavator Add
  • M319 Wheeled Excavator Add
  • M316 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • 352 LRE Long Reach Excavation Hydraulic Excavator Add
  • M314 Wheeled Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • 395 Excavator Add