Compare Equipment Go Back
301.7 CR Mini Hydraulic Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
M314 Wheeled Excavator |
M315 Wheeled Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power | 21 HP | - | - | - |
Engine Model | C1.1 | Cat C13 | Cat C3.6 | C4.4 |
Displacement | 69 in³ | 763 in³ | 221 in³ | 268.5 in³ |
Note | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. | - | - | - |
Note (1) | Advertised power is tested per the specified standard in effect at the time of manufacture. | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Engine Power | 21.6 HP | - | - | - |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Bore | 3 in | 5 in | 3.9 in | 4.1 in |
Stroke | 3.2 in | 6 in | 5 in | 127 mm |
Net Power - ISO 9249 | - | 424 HP | 134 HP | 145 HP |
Net Power - ISO 9249 (DIN) | - | 429.9 hp (metric) | 129 hp (metric) | 147 hp (metric) |
Engine Power - ISO 14396 | - | 425 HP | 134 HP | 148 HP |
Engine Power - ISO 14396 (DIN) | - | 431 hp (metric) | 136 hp (metric) | 150 hp (metric) |
Biodiesel Capability | - | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 4222 lb | 128800 lb | - | - |
Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. | - | - | - |
Note (1) | *Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank. | - | - | - |
Minimum Operating Weight with Canopy* | 3946 lb | - | - | - |
Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. | - | - | - |
Maximum Operating Weight with Canopy** | 4222 lb | - | - | - |
EU: CE Plate Weight*** | 4167 lb | - | - | - |
Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - | - |
Dimensions - Long Stick |
||||
Dig Depth | 100 in | - | - | - |
Tail Swing | 25.6 in | - | - | - |
O/A Shipping Height | 90.6 in | - | - | - |
Maximum Blade Height | 10.6 in | - | - | - |
Minimum Ground Clearance Below Undercarriage | 5.5 in | - | - | - |
Boom Height - Shipping Position | 40.9 in | - | - | - |
Maximum Dump Clearance | 98.8 in | - | - | - |
Track Belt/Shoe Width | 9.1 in | - | - | - |
Track Width - Expanded | 51.18 in | - | - | - |
Maximum Reach - Ground Level | 159.8 in | - | - | - |
Stick Length | 45.7 in | - | - | - |
Vertical Wall | 74.4 in | - | - | - |
Track Width - Retracted | 39 in | - | - | - |
Boom Swing - Right | 50 ° | - | - | - |
Maximum Reach | 162.6 in | - | - | - |
Boom In Reach | 63.8 in | - | - | - |
Overall Shipping Length* | 141.3 in | - | - | - |
Maximum Blade Depth | 10.4 in | - | - | - |
O/A Undercarriage Length | 62.6 in | - | - | - |
Maximum Dig Height | 137.4 in | - | - | - |
Swing Bearing - Height | 17.4 in | - | - | - |
Boom Swing - Left | 65 ° | - | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - | - |
Blade |
||||
Height | 8.9 in | - | - | - |
Width* | 39 in | - | - | - |
Note | *Expanded – 1300 mm (51 in) | - | - | - |
Travel System |
||||
Gradeability - Maximum | 30 degrees | - | - | - |
Ground Pressure - Minimum Weight | 4 psi | - | - | - |
Maximum Traction Force - High Speed | 2675.2 lbf | - | - | - |
Travel Speed - High | 2.7 mile/h | - | - | - |
Ground Pressure - Maximum Weight | 4.4 psi | - | - | - |
Travel Speed - Low | 1.8 mile/h | - | - | - |
Maximum Traction Force - Low Speed | 4136.5 lbf | - | - | - |
Service Refill Capacities |
||||
Hydraulic System | 6.9 gal (US) | - | - | - |
Fuel Tank | 5.8 gal (US) | - | 77.9 gal (US) | 74 gal (US) |
Engine Oil | 1.2 gal (US) | - | - | - |
Hydraulic Tank | 4.8 gal (US) | 57.3 gal (US) | 23.8 gal (US) | 23.8 gal (US) |
Cooling System | 1 gal (US) | 13.7 gal (US) | 6.3 gal (US) | 24 l |
Fuel Tank Capacity | - | 188.9 gal (US) | - | - |
Engine Oil - With Filter | - | 10.6 gal (US) | - | - |
Swing Drive | - | 2.8 gal (US) | - | - |
Final Drive - Each | - | 2.5 gal (US) | - | - |
Hydraulic System - Including Tank | - | 145.3 gal (US) | 58.1 gal (US) | 58.1 gal (US) |
DEF Tank | - | 12.2 gal (US) | - | - |
Diesel Exhaust Fluid (DEF) | - | - | 5.3 gal (US) | 5.3 gal (US) |
Final Drive | - | - | 0.6 gal (US) | - |
Sound |
||||
Note | European Union Directive “2000/14/EC” | - | - | - |
Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) | - | - | - |
Dimensions - Standard Stick |
||||
Note | *Overall Shipping Length depends on blade position during shipment. | - | - | - |
Track Belt/Shoe Width | 9.1 in | - | - | - |
Track Width - Expanded | 51.18 in | - | - | - |
O/A Undercarriage Length | 62.6 in | - | - | - |
Maximum Reach - Ground Level | 153.5 in | - | - | - |
Boom Height - Shipping Position | 42.9 in | - | - | - |
Maximum Reach | 156.3 in | - | - | - |
Dig Depth | 92.5 in | - | - | - |
Maximum Dump Clearance | 96.5 in | - | - | - |
Maximum Blade Height | 10.6 in | - | - | - |
Tail Swing | 25.6 in | - | - | - |
Boom In Reach | 64.2 in | - | - | - |
Minimum Ground Clearance Below Undercarriage | 5.5 in | - | - | - |
O/A Shipping Height | 90.6 in | - | - | - |
Swing Bearing - Height | 17.4 in | - | - | - |
Stick Length | 37.8 in | - | - | - |
Vertical Wall | 70.9 in | - | - | - |
Boom Swing - Right | 50 ° | - | - | - |
Track Width - Retracted | 39 in | - | - | - |
Maximum Dig Height | 135 in | - | - | - |
Overall Shipping Length* | 142.5 in | - | - | - |
Boom Swing - Left | 65 ° | - | - | - |
Maximum Blade Depth | 10.4 in | - | - | - |
Certification - Canopy |
||||
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - | - |
Top Guard | ISO 10262:1998 (Level I) | - | - | - |
Weight Increase from Minimum Configuration |
||||
Expandable Undercarriage | Standard | - | - | - |
Steel Tracks | 110 lb | - | - | - |
Long Stick | 22 lb | - | - | - |
Heavy Counterweight | 148 lb | - | - | - |
Hydraulic System |
||||
Auxiliary Circuit - Primary - Pressure | 3553.4 psi | - | - | - |
Auxiliary Circuit - Secondary - Pressure | 3553.4 psi | - | - | - |
Auxiliary Circuit - Secondary - Flow | 3.7 gal/min | - | - | - |
Auxiliary Circuit - Primary - Flow | 8.7 gal/min | - | - | - |
Digging Force - Stick - Long | 1865.9 lbf | - | - | - |
Operating Pressure - Equipment | 3553.4 psi | - | - | - |
Operating Pressure - Swing | 2132.1 psi | - | - | - |
Digging Force - Stick - Standard | 2135.7 lbf | - | - | - |
Pump Flow at 2,400 rpm | 17.4 gal/min | - | - | - |
Digging Force - Bucket | 3641.9 lbf | - | - | - |
Operating Pressure - Travel | 3553.4 psi | - | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - | - |
Maximum Flow - Main System | - | 206 gal/min | - | - |
Maximum Pressure - Equipment | - | 5076 psi | 5076 psi | - |
Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | - | - |
Maximum Pressure - Travel | - | 5076 psi | 5076 psi | - |
Maximum Pressure - Swing | - | 3771 psi | 5149 psi | - |
Main System - Maximum Flow - Implement | - | - | 71 gal/min | 73 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Sustainability |
||||
Recyclability | 95% | - | 91% | - |
Swing System |
||||
Machine Swing Speed | 9.8 r/min | - | - | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | - | 42.8 ft | - | - |
Boom | - | LRE Boom 11.5 m (37'9") | - | - |
Stick | - | LRE Stick 8.5 m (27'11') | - | - |
Bucket | - | HD 1.19 m³ (1.56 yd³) | - | - |
Maximum Reach at Ground Level | - | 64.4 ft | - | - |
Maximum Cutting Height | - | 48.2 ft | - | - |
Maximum Loading Height | - | 39.4 ft | - | - |
Minimum Loading Height | - | 7.3 ft | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 42.5 ft | - | - |
Bucket Digging Force - ISO | - | 31700 lbf | - | - |
Stick Digging Force - ISO | - | 23380 lbf | - | - |
Swing Mechanism |
||||
Maximum Swing Torque | - | 138000 ft·lbf | 28860 ft·lbf | 30340 ft·lbf |
Swing Speed | - | - | 9.1 r/min | 9.1 r/min |
Dimensions |
||||
Boom | - | LRE Boom 11.5 m (37'9") | 5m (16' 6") | VA 5.2 m (17'1") |
Stick | - | LRE Stick 8.5 m (27'11') | 2.2m (7' 3") | 2.5m (8'2") |
Bucket | - | HD 1.19 m³ (1.56 yd³) | 0.76m3 (.78 yd3) | GD 0.76 m³ (0.99 yd³ ) |
Shipping Height - Top of Cab | - | 11.1 ft | 3315 ft | 10.9 ft |
Handrail Height | - | 11.6 ft | - | - |
Shipping Length | - | 54 ft | 26.9 ft | 25.1 ft |
Tail Swing Radius | - | 12.3 ft | 7.1 ft | 5.9 ft |
Counterweight Clearance | - | 4.7 ft | 4.1 ft | 4.2 ft |
Ground Clearance | - | 2.3 ft | 1.1 ft | 1.5 ft |
Track Length | - | 17.6 ft | - | - |
Track Length to Center of Rollers | - | 14.2 ft | - | - |
Track Gauge | - | 10.6 ft | - | - |
Transport Width | - | 13.6 ft | - | - |
Undercarriage Length | - | - | 16.1 ft | 16 ft |
Wheel Base | - | - | 8.2 ft | 8.4 ft |
Support Point | - | - | - | 10.1 ft |
Air Conditioning System |
||||
Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - | - |
Note | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. |
Machine Weight |
||||
Operating Weight Maximum | - | - | 39683 lb | 39680 lb |
Note (1) | - | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | - |
Operating Weight Minimum | - | - | 33069 lb | 34610 lb |
Drive |
||||
Maximum Travel Speed | - | - | 23 mile/h | - |
Working Ranges and Forces |
||||
Boom Type | - | - | VA Boom | VA 5.2 m (17'1") |
Bucket | - | - | 0.76m3 (0.99 y3) GD | GD 0.76 m³ (0.99 yd³ ) |
Stick | - | - | R2.2CB (7' 3") | 2.5m (8'2") |
Digging Height | - | - | 17.4 ft | 18.4 ft |
Dump Height | - | - | 23 ft | 25.2 ft |
Reach at Ground Level | - | - | 28.4 ft | 29.6 ft |
Vertical Wall Digging Depth | - | - | 13.9 ft | 15 ft |
Note (1) | - | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | - |
Stick Forces (ISO) | - | - | - | 15961 lbf |
Bucket Forces (ISO) | - | - | - | 23830 lbf |
Transmission |
||||
Maximum Travel Speed | - | - | - | 21.7 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 6.2 mile/h |
Forward/Reverse - 2nd Gear | - | - | - | 21.7 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 23380 lbf |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 34.2 ft |
Add a Similar Product: