CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    824K Wheel Dozer
    View Product
    D11 Dozer
    View Product Remove
    D6 Dozer
    View Product Remove

    Engine
    Engine Model Cat® C15 - Cat C9.3B
    Net Power - ISO 9249 405 HP - -
    Stroke 6.7 in - -
    Gross Power 435 HP - -
    Emissions Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards - U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
    Displacement 927.6 in³ - -
    Bore 5.4 in - -
    Power - Net - - 215 HP
    Net Power - Rated - ISO 9249/SAE J1349 - - 215 HP
    Net Power (Rated) - ISO 9249 (DIN) - - 219 mhp
    Note (1) - - Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a
    Note (2) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
    Note (3) - - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
    Note (4) - - Machine Build Number 20B

    Transmission
    Transmission Type Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung) - -
    1.0 Forward - 2.5 mile/h -
    2.0 Forward - 4.4 mile/h -
    3.0 Forward - 7.6 mile/h -
    1.0 Reverse - 3 mile/h -
    2.0 Reverse - 5.3 mile/h -
    3.0 Reverse - 9.1 mile/h -
    Drawbar Pull - 3 Forward - 46250 ft·lbf -
    Drawbar Pull - 1 Forward - 148200 ft·lbf -
    Drawbar Pull - 2 Forward - 82300 ft·lbf -
    Power Train - - Fully Automatic 4-Speed Powershift

    Axles
    Front Planetary – Fixed - -
    Rear Planetary – Oscillating - -
    Oscillation Angle ±11° - -

    Service Refill Capacities
    Differential - Final Drives - Front 26.4 gal (US) - -
    Fuel Tank 206.6 gal (US) - 90 gal (US)
    Differential - Final Drives - Rear 29.1 gal (US) - -
    Transmission 17.4 gal (US) - -
    Cooling System 30.6 gal (US) 46.8 gal (US) -
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) -
    Engine Crankcase - 35.1 gal (US) -
    Power Train - 120 gal (US) -
    Power Train - Refill Volume - 103.3 gal (US) -
    Final Drive - Each - 12.4 gal (US) -
    Roller Frames - Each - 24.8 gal (US) -
    Hydraulic Tank - 42.2 gal (US) -
    Hydraulic System Tank and Chassis - 64.7 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) -
    DEF Tank - - 7.4 gal (US)

    Operating Specifications
    Operating Weight 74966 lb - -

    Dimensions (Approximate)
    Height - Top of Hood 10.5 ft - -
    Height - Top of Cab 13.5 ft - -
    Wheel Base 12.1 ft - -
    Centerline of Rear Axle to Edge of Bumper 9.3 ft - -
    Height - Top of Exhaust Stack 14.2 ft - -
    Ground Clearance 1.4 ft - -
    Centerline of Front Axle to Hitch 6.1 ft - -

    Hydraulic System
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke 140 mm × 230 mm (5.5 in × 9.1 in) - -
    Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 1070 mm (4.7 in × 42.1 in) - -

    Hydraulic System - Steering
    Steering System - Circuit Double Acting – End Mounted - -
    Steering System - Pump Piston – Variable Displacement - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Weights
    Operating Weight - 229800 lb 50733 lb
    Operating Weight - Carrydozer - 250665 lb -
    Note (1) - D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. -
    Note (2) - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in -
    U-Blade Capacity - 45 yd³ -
    U-Blade Width - 249.6 in -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ -
    Carry Dozer - Width with blade (over end bits) - 263.9 in -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) -
    Fuel Tank - Usable Volume - 475 gal (US) -

    Hydraulic Controls
    Pump Type - Variable displacement piston pump -
    Combined Pump Output - Implement - 177 gal/min -

    Undercarriage
    Shoe Type - Extreme Service -
    Width - Shoe - 28 in -
    Width - Shoe - CD - 36 in -
    Shoes/Side - 41 -
    Grouser Height - 4 in -
    Pitch - 12.5 in -
    Ground Clearance* - 30.6 in -
    Track Gauge - 114 in -
    Length - Track on Ground - 175 in -
    Ground Contact Area - 9781 in² -
    Ground Contact Area - CD - 12605 in² -
    Track Rollers/Side - 8 -
    Number of Carrier Rollers - 1 per side (optional) -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb -
    Maximum penetration depth (standard tip) - 63.5 in -
    Pryout Force - 148510 lb -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb -
    Maximum penetration depth (standard tip) - 85.5 in -
    Pryout Force - 148510 lb -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in -
    Maximum Penetration Force - Shank Vertical - 77350 lb -
    Maximum Penetration - Standard Tip - 43.3 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in -
    Length with SU-Blade** - No rear attachment - 345.1 in -
    Overall Length SU-Blade and SS Ripper** - 421.7 in -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). -

    Dimensions - D11
    Ground Clearance* - 31.4 in -
    Track Gauge - 114 in -
    Width at Outside of Track (710 mm Track Shoe) - 142 in -
    Height (ROPS/canopy)* - 185.9 in -
    Length of Track on Ground - 175 in -
    Length with SU-Blade** - No rear attachment - 337.8 in -
    Overall Length SU-Blade and SS Ripper** - 414.4 in -
    Note - *Includes grouser height for total dimensions on hard surfaces. -

    Air Conditioning System
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.

    D6 Push Arm
    Operating Weight - - 48788 lb
    Ground Pressure - - 7.9 psi
    Width of Standard Shoe - - 24 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 7.5 yd³

    D6 LGP (30-in) Push Arm
    Operating Weight - - 50420 lb
    Ground Pressure - - 6.5 psi
    Width of Standard Shoe - - 30 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 7.6 yd³

    D6 LGP (36-in) Push Arm
    Operating Weight - - 52715 lb
    Ground Pressure - - 5.2 psi
    Width of Standard Shoe - - 36 in
    Blade - - Straight
    Blade Capacity - - 5 yd³

    D6 VPAT
    Operating Weight - - 49108 lb
    Ground Pressure - - 7.1 psi
    Width of Standard Shoe - - 24 in
    Blade - - VPAT
    Blade Capacity - - 5.4 yd³

    D6 LGP (30-in) VPAT
    Operating Weight - - 50733 lb
    Ground Pressure - - 5.9 psi
    Width of Standard Shoe - - 30 in
    Blade - - VPAT
    Blade Capacity - - 5.9 yd³

    D6 LGP (36-in) VPAT
    Operating Weight - - 51912 lb
    Ground Pressure - - 5 psi
    Width of Standard Shoe - - 36 in
    Blade - - VPAT
    Blade Capacity - - 6.5 yd³

    Sustainability
    Recyclability - - 98%
    Add a Similar Product: