|
|
|
|
Engine |
| Engine Model |
Cat® C15 |
Cat C9.3B |
Cat® C18 |
| Net Power - ISO 9249 |
405 HP |
- |
- |
| Stroke |
6.7 in |
- |
7.2 in |
| Gross Power |
435 HP |
- |
- |
| Emissions |
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards |
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV |
U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. |
| Displacement |
927.6 in³ |
- |
1105 in³ |
| Bore |
5.4 in |
- |
5.7 in |
| Power - Net |
- |
265 HP |
- |
| Net Power - Rated - ISO 9249/SAE J1349 |
- |
265 HP |
- |
| Net Power (Rated) - ISO 9249 (DIN) |
- |
268 mhp |
- |
| Note (1) |
- |
Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t |
- |
| Note (2) |
- |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
- |
| Note (3) |
- |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
- |
| Note (4) |
- |
Machine Build Number 17A |
- |
| Rated Speed |
- |
- |
1900 r/min |
| Peak Power Speed |
- |
- |
1500 r/min |
| Gross Power - SAE J1995 |
- |
- |
562 HP |
| Net Power - SAE J1349 |
- |
- |
496 HP |
| Peak Torque - 1,300 rpm |
- |
- |
2092 lb/ft |
| Torque Rise |
- |
- |
52 % |
Transmission |
| Transmission Type |
Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung) |
- |
Cat planetary power shift |
| Power Train |
- |
Fully Automatic 4-Speed |
- |
| Forward - 1 |
- |
- |
4.2 mile/h |
| Forward - 2 |
- |
- |
7.2 mile/h |
| Forward - 3 |
- |
- |
12.6 mile/h |
| Forward - 4 |
- |
- |
22 mile/h |
| Reverse - 1 |
- |
- |
4.2 mile/h |
| Reverse - 2 |
- |
- |
7.6 mile/h |
| Reverse - 3 |
- |
- |
13.3 mile/h |
| Direct Drive - Forward 1 |
- |
- |
Lock-up disabled |
| Direct Drive - Forward 2 |
- |
- |
7.7 mile/h |
| Direct Drive - Forward 3 |
- |
- |
13.7 mile/h |
| Direct Drive - Forward 4 |
- |
- |
23.9 mile/h |
| Direct Drive - Reverse 1 |
- |
- |
4.5 mile/h |
| Direct Drive - Reverse 2 |
- |
- |
8.1 mile/h |
| Direct Drive - Reverse 3 |
- |
- |
14.3 mile/h |
Axles |
| Front |
Planetary – Fixed |
- |
Fixed |
| Rear |
Planetary – Oscillating |
- |
Trunnion |
| Oscillation Angle |
±11° |
- |
±13° |
Service Refill Capacities |
| Differential - Final Drives - Front |
26.4 gal (US) |
- |
49.1 gal (US) |
| Fuel Tank |
206.6 gal (US) |
123 gal (US) |
209.5 gal (US) |
| Differential - Final Drives - Rear |
29.1 gal (US) |
- |
49.1 gal (US) |
| Transmission |
17.4 gal (US) |
- |
31.7 gal (US) |
| Cooling System |
30.6 gal (US) |
- |
31.7 gal (US) |
| DEF Tank |
- |
12 gal (US) |
- |
| Crankcase |
- |
- |
15.9 gal (US) |
| Diesel Exhaust Fluid Tank |
- |
- |
8.7 gal (US) |
| Hydraulic System Factory Fill |
- |
- |
63.4 gal (US) |
| Hydraulic System - Tank Only |
- |
- |
37 gal (US) |
Operating Specifications |
| Operating Weight |
74966 lb |
- |
105271 lb |
| Blade Capacities |
- |
- |
7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
| Coal Scoop Operating Weight |
- |
- |
112428 lb |
| Chip Scoop Operating Weight |
- |
- |
112838 lb |
Dimensions (Approximate) |
| Height - Top of Hood |
10.5 ft |
- |
- |
| Height - Top of Cab |
13.5 ft |
- |
- |
| Wheel Base |
12.1 ft |
- |
- |
| Centerline of Rear Axle to Edge of Bumper |
9.3 ft |
- |
- |
| Height - Top of Exhaust Stack |
14.2 ft |
- |
- |
| Ground Clearance |
1.4 ft |
- |
- |
| Centerline of Front Axle to Hitch |
6.1 ft |
- |
- |
Hydraulic System |
| Cylinder, Double Acting - Tilt and Tip, Bore and Stroke |
140 mm × 230 mm (5.5 in × 9.1 in) |
- |
- |
| Cylinders, Double Acting - Lift, Bore and Stroke |
120 mm × 1070 mm (4.7 in × 42.1 in) |
- |
- |
Hydraulic System - Steering |
| Steering System - Circuit |
Double Acting – End Mounted |
- |
Pilot, load sensing |
| Steering System - Pump |
Piston – Variable Displacement |
- |
Piston, variable displacement |
| Maximum Flow |
- |
- |
65.8 gal/min |
| Relief Valve Setting - Steering |
- |
- |
3495 psi |
| Total Steering Angle |
- |
- |
86 ° |
| Steering Cycle Times - High Idle |
- |
- |
3.1 s |
| Steering Cycle Times - Low Idle |
- |
- |
5.7 s |
Weights |
| Operating Weight |
- |
65644 lb |
- |
| Note (1) |
- |
Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. |
- |
Standard SU |
| Operating Weight |
- |
65644 lb |
- |
| Ground Pressure |
- |
10 psi |
- |
| Width of Standard Shoe |
- |
24 in |
- |
| Blade |
- |
Semi-Universal (SU) |
- |
| Blade Capacity |
- |
10 yd³ |
- |
LGP S |
| Operating Weight |
- |
63220 lb |
- |
| Ground Pressure |
- |
6 psi |
- |
| Width of Standard Shoe |
- |
36 in |
- |
| Blade |
- |
Straight (S) |
- |
| Blade Capacity |
- |
8 yd³ |
- |
Waste Handler |
| Operating Weight |
- |
62035 lb |
- |
| Ground Pressure |
- |
10 psi |
- |
| Width of Standard Shoe |
- |
24 in |
- |
| Blade |
- |
Universal Landfill (U) |
- |
| Blade Capacity |
- |
22 yd³ |
- |
Sustainability |
| Recyclability |
- |
98% |
- |
Air Conditioning System |
| Air Conditioning |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
|
| Note (2) |
- |
Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. |
- |
Hydraulic System - Lift/Tilt |
| Lift/Tilt System - Circuit |
- |
- |
Pilot operated LS valve with EH |
| Lift/Tilt System |
- |
- |
Variable displacement piston |
| Maximum Flow at 1,900 rpm |
- |
- |
153 gal/min |
| Relief Valve Setting - Lift/Tilt |
- |
- |
4641 psi |
| Cylinders, Double Acting - Lift, Bore and Stroke |
- |
- |
139.75 mm × 1021 mm (5.5 in × 40.2 in) |
| Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
- |
- |
140 mm × 230 mm (5.5 in × 9.1 in) |
| Pilot System |
- |
- |
Variable displacement piston |
| Pilot Maximum Flow |
- |
- |
13.7 gal/min |
| Pilot Relief Valve Setting |
- |
- |
580 psi |
Brakes |
| Brakes |
- |
- |
ISO 3450: 2011 |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
| Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
| Machine Sound Level (ISO 6395) |
- |
- |
113 dB(A) |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
| Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
| Machine Sound Level (ISO 6395) |
- |
- |
109 dB(A) |
Dimensions |
| Height - Top of Exhaust Stack |
- |
- |
15.9 ft |
| Height - Top of Air Cleaner |
- |
- |
12.8 ft |
| Height - Top of Hood |
- |
- |
10.9 ft |
| Ground Clearance - Bumper |
- |
- |
3.1 ft |
| Centerline of Rear Axle to Edge of Bumper |
- |
- |
10.5 ft |
| Wheel Base |
- |
- |
14.9 ft |
| Length - Front of Tire |
- |
- |
28.4 ft |
| Length - Straight Blade on Ground |
- |
- |
32.6 ft |
| Centerline of Front Axle to Hitch |
- |
- |
7.5 ft |
| Length - Universal Blade on Ground |
- |
- |
34.4 ft |
| Ground Clearance |
- |
- |
1.7 ft |
| Height - Top of Cab |
- |
- |
13.7 ft |
Scoops |
| Chip Scoop Carry Capacity |
- |
- |
35 yd³ |
| Chip Scoop Doze Capacity |
- |
- |
70 yd³ |
| Coal Scoop Carry Capacity |
- |
- |
30 yd³ |
| Coal Scoop Doze Capacity |
- |
- |
60 yd³ |
