CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    834 Wheel Dozer
    View Product
    D10 Dozer
    View Product Remove
    D2 Dozer
    View Product Remove

    Engine
    Engine Model Cat® C18 - Cat® C3.6
    Rated Speed 1900 r/min - -
    Peak Power Speed 1500 r/min - -
    Gross Power - SAE J1995 562 HP - -
    Net Power - SAE J1349 496 HP - -
    Bore 5.7 in - -
    Stroke 7.2 in - -
    Displacement 1105 in³ - 220 in³
    Peak Torque - 1,300 rpm 2092 lb/ft - -
    Torque Rise 52 % - -
    Emissions U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. - -
    Power - Net - - 92 HP
    Net Power - 2,200 rpm - SAE J1349 - - 92 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 92 HP
    Note (1) - - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Power Train - - Hydrostatic
    Note (2) - - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

    Operating Specifications
    Operating Weight 105271 lb - -
    Blade Capacities 7.9 – 22.2 m3 (10.3 – 29.0 yd3) - -
    Coal Scoop Operating Weight 112428 lb - -
    Chip Scoop Operating Weight 112838 lb - -

    Transmission
    Transmission Type Cat planetary power shift - -
    Forward - 1 4.2 mile/h - -
    Forward - 2 7.2 mile/h - -
    Forward - 3 12.6 mile/h - -
    Forward - 4 22 mile/h - -
    Reverse - 1 4.2 mile/h - -
    Reverse - 2 7.6 mile/h - -
    Reverse - 3 13.3 mile/h - -
    Direct Drive - Forward 1 Lock-up disabled - -
    Direct Drive - Forward 2 7.7 mile/h - -
    Direct Drive - Forward 3 13.7 mile/h - -
    Direct Drive - Forward 4 23.9 mile/h - -
    Direct Drive - Reverse 1 4.5 mile/h - -
    Direct Drive - Reverse 2 8.1 mile/h - -
    Direct Drive - Reverse 3 14.3 mile/h - -
    1.0 Forward - 2.5 mile/h -
    1.5 Forward - 3.4 mile/h -
    2.0 Forward - 4.5 mile/h -
    2.5 Forward - 6 mile/h -
    3.0 Forward - 7.8 mile/h -
    1.0 Reverse - 3.2 mile/h -
    1.5 Reverse - 4.2 mile/h -
    2.0 Reverse - 5.6 mile/h -
    2.5 Reverse - 7.5 mile/h -
    3.0 Reverse - 9.8 mile/h -
    Transmission Clutch Diameter - 17 in -
    Type - Planetary powershift -
    Drive Pumps - - 1
    Maximum Travel Speed - Forward - - 5.6 mile/h
    Relief Valve Settings - - 7033 psi
    Maximum Travel Speed - Reverse - - 6.2 mile/h
    Track Motors - - 2

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH - -
    Lift/Tilt System Variable displacement piston - -
    Maximum Flow at 1,900 rpm 153 gal/min - -
    Relief Valve Setting - Lift/Tilt 4641 psi - -
    Cylinders, Double Acting - Lift, Bore and Stroke 139.75 mm × 1021 mm (5.5 in × 40.2 in) - -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 140 mm × 230 mm (5.5 in × 9.1 in) - -
    Pilot System Variable displacement piston - -
    Pilot Maximum Flow 13.7 gal/min - -
    Pilot Relief Valve Setting 580 psi - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - -
    Steering System - Pump Piston, variable displacement - -
    Maximum Flow 65.8 gal/min - -
    Relief Valve Setting - Steering 3495 psi - -
    Total Steering Angle 86 ° - -
    Steering Cycle Times - High Idle 3.1 s - -
    Steering Cycle Times - Low Idle 5.7 s - -

    Service Refill Capacities
    Fuel Tank 209.5 gal (US) - 51.5 gal (US)
    Cooling System 31.7 gal (US) - 5 gal (US)
    Crankcase 15.9 gal (US) - -
    Diesel Exhaust Fluid Tank 8.7 gal (US) - -
    Transmission 31.7 gal (US) - -
    Hydraulic System Factory Fill 63.4 gal (US) - -
    Differential - Final Drives - Front 49.1 gal (US) - -
    Differential - Final Drives - Rear 49.1 gal (US) - -
    Hydraulic System - Tank Only 37 gal (US) - -
    Crankcase - With Filter - - 2.8 gal (US)
    Final Drive - Each - LGP - - 2.6 gal (US)
    Transmission - Hydraulic Tank - - 23.8 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US)
    Final Drives - Each Side - - 2.6 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Axles
    Front Fixed - -
    Rear Trunnion - -
    Oscillation Angle ±13° - -

    Brakes
    Brakes ISO 3450: 2011 - -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 72 dB(A) - -
    Machine Sound Level (ISO 6395) 113 dB(A) - -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) 72 dB(A) - -
    Machine Sound Level (ISO 6395) 109 dB(A) - -

    Dimensions
    Height - Top of Exhaust Stack 15.9 ft - -
    Height - Top of Air Cleaner 12.8 ft - -
    Height - Top of Hood 10.9 ft - -
    Ground Clearance - Bumper 3.1 ft - -
    Centerline of Rear Axle to Edge of Bumper 10.5 ft - -
    Wheel Base 14.9 ft - -
    Length - Front of Tire 28.4 ft - -
    Length - Straight Blade on Ground 32.6 ft - -
    Centerline of Front Axle to Hitch 7.5 ft - -
    Length - Universal Blade on Ground 34.4 ft - -
    Ground Clearance 1.7 ft - -
    Height - Top of Cab 13.7 ft - -
    Length of Basic Dozer (without blade) - LGP - - 129.5 in
    Width of Dozer (standard shoes, no blade) - Standard - - 79.1 in
    Dozer Height - LGP - - 108.9 in
    Dozer Height - Standard - - 108.9 in
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in
    Length of Basic Dozer (without blade) - Standard - - 129.5 in
    BLADE: Digging Depth - LGP - - 23.2 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58°
    BLADE: Blade Lift Height - LGP - - 27.9 in
    BLADE: Blade Width - LGP - - 124 in
    BLADE: Blade Width at Maximum Angle - LGP - - 113.1 in
    Track Gauge - LGP - - 67.9 in
    Ground Clearance - LGP - - 13 in
    BLADE: Blade Height - LGP - - 35.8 in
    Overall Length - With Blade - LGP - - 168.2 in
    BLADE: Blade Capacity (SAE) - LGP - - 2.42 yd³
    BLADE: Maximum Tilt - LGP - - 17.2 in
    BLADE: Maximum Angle (either side) - LGP - - 25°
    BLADE: Maximum Angle (either side) - Standard - - 25°
    Ground Clearance - Standard - - 13 in
    Overall Length - With Blade - Standard - - 168.5 in
    Note - - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58°
    BLADE: Maximum Tilt - Standard - - 15.2 in
    Track Gauge - Standard - - 61 in
    BLADE: Digging Depth - Standard - - 23.3 in
    BLADE: Blade Width - Standard - - 109.5 in
    BLADE: Blade Lift Height - Standard - - 29.3 in
    BLADE: Blade Capacity (SAE) - Standard - - 2.59 yd³
    BLADE: Blade Width at Maximum Angle - Standard - - 100.1 in
    BLADE: Blade Height - Standard - - 39.8 in

    Scoops
    Chip Scoop Carry Capacity 35 yd³ - -
    Chip Scoop Doze Capacity 70 yd³ - -
    Coal Scoop Carry Capacity 30 yd³ - -
    Coal Scoop Doze Capacity 60 yd³ - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C27 -
    Engine Power - Net SAE J1349/ISO 9249** - Forward - 602 HP -
    Engine Power - Gross SAE J1995* - Forward - 631 HP -
    Engine Power - Gross SAE J1995* - Reverse - 766 HP -
    Engine Power - ISO 14396* - Forward - 620 HP -
    Engine Power - ISO 14396* - Reverse - 754 HP -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - 722 HP -
    Displacement - 1648 in³ -
    Stroke - 6 in -
    Bore - 5.4 in -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Note (1) - *Excludes all fan losses. -
    Note (2) - All Engine ratings apply at 1,800 rpm. -
    Note (3) - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). -
    Note (4) - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -

    Weights
    Operating Weight - 154888 lb 18382 lb
    Shipping Weight - 111739 lb -
    Note (1) - D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) - D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - 19066 lb

    Undercarriage
    Shoe Type - Extreme Service (ES) -
    Width - Shoe - 24 in -
    Shoes/Side - 44 -
    Grouser Height - 3.7 in -
    Pitch - 10.2 in -
    Ground Clearance - 28.5 in -
    Track Gauge - 100.4 in 61 in
    Length - Track on Ground - 152.8 in -
    Ground Contact Area - 7347 in² -
    Track Rollers/Side - 8 -
    Number of Carrier Rollers - 1 per side (optional) -
    Length - Track on Ground - LGP - - 89 in
    Number of Rollers - Each Side - - 7
    Track Gauge - LGP - - 68 in
    Ground Pressure - LGP - - 4.3 psi
    Shoe Width - Standard - - 18 in
    Shoe Width - LGP - - 25 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 43
    Number of Shoes - Each Side - Abrasion Undercarriage - - 38
    Ground Pressure - - 5.7 psi
    Length of Track on Ground - - 89 in

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. -
    FOPS - Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. -
    Sound - Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) -
    Note - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and -
    Sound (1) - Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A) -
    Note (1) - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. -
    Note (2) - The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. -
    Note (3) - The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). -

    Steering and Brakes
    Steering Type - Hydraulically Applied Multiple-Disc Steering Clutch -
    Brake Type - Spring Applied Multiple- Disc Brake -
    Brake Diameter - 15.4 in -
    Brake Count - 10 -

    Blades
    10SU ABR - Capacity (SAE J1265) - 24.2 yd³ -
    10SU ABR - Width (over end bits) - 194.5 in -
    10SU ABR - Height - 83.5 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - 19.98 in -
    10SU ABR - Digging Depth - Blade Pitch: Nominal - 25.23 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - 30.08 in³ -
    10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - 66.14 in -
    10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - 53.86 in -
    10SU ABR - Ground Clearance - Maximum Tilt LH - 56.3 in -
    10SU ABR - Ground Clearance - Maximum Tilt RH - 56.3 in -
    10U ABR - Capacity (SAE J1265) - 28.7 yd³ -
    10U ABR - Width (over end bits) - 207.1 in -
    10U ABR - Height - 83.5 in -
    10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - 19.98 in -
    10U ABR - Digging Depth - Blade Pitch: Nominal - 60 in -
    10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - 30.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - 66.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - 53.9 in -
    10U ABR - Ground Clearance - Maximum Tilt LH - 60.8 in -
    10U ABR - Ground Clearance - Maximum Tilt RH - 60.8 in -
    10U ABR - Weights - Blade Weight* - 23585 lb -
    10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) - 154888 lb -
    Note (1) - Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees -
    Note (2) - *Does not include hydraulic controls but includes blade cylinders, pusharms. -
    Note (3) - **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 49233 lbf -
    Maximum penetration depth (standard tip) - 59.2 in -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 36 in -
    Weight - 14209 lb -
    Note - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 53055 lbf -
    Maximum penetration depth (standard tip) - 78.3 in -
    Weight - 14548 lb -
    Note - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C27 -
    Engine Power - Net SAE J1349/ISO 9249** - Forward - 603 HP -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - 722 HP -
    Engine Power - Gross SAE J1995* - Forward - 631 HP -
    Engine Power - Gross SAE J1995* - Reverse - 766 HP -
    Engine Power - ISO 14396* - Forward - 622 HP -
    Engine Power - ISO 14396* - Reverse - 756 HP -
    Displacement - 1648 in³ -
    Bore - 5.4 in -
    Stroke - 6 in -
    Emissions - U.S. EPA Tier 2 Equivalent -
    Note (1) - *Excludes all fan losses. -
    Note (2) - All Engine ratings apply at 1,800 rpm. -
    Note (3) - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). -
    Note (4) - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -

    Fuel Tank Capacities
    Fuel Tank - Usable Volume - 323.3 gal (US) -
    Fuel Tank - Total Volume - 335.2 gal (US) -

    Hydraulic Controls
    Pump Type - Variable displacement piston -
    Pump Output - Implement - 112 gal/min -
    Note (1) - Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). -
    Fan Pump - 21.7 gal/min -
    Note (2) - Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). -
    Tilt Cylinder Flow - Rod End Flow - 112 gal/min -
    Tilt Cylinder Flow - Head End Flow - 63.4 gal/min -
    Lift Cylinder Relief Valve Setting - 4061.1 psi -
    Tilt Cylinder Relief Valve Setting - 3872.5 psi -
    Ripper - Lift - Relief Valve Setting - 4061.1 psi -
    Ripper - Pitch - Relief Valve Setting - 4061.1 psi -
    Tank Capacity - 32.2 gal (US) -
    Cylinder Sizing - Blade Lift - Bore - 5.5 in -
    Cylinder Sizing - Blade Tilt - Bore - 8.3 in -
    Cylinder Sizing - Ripper Shank Lift - Bore - 8.3 in -
    Cylinder Sizing - Ripper Shank Angle - Bore - 7.1 in -
    Cylinder Sizing - Blade Lift - Stroke - 65.1 in -
    Cylinder Sizing - Blade Tilt - Stroke - 9.5 in -
    Cylinder Sizing - Ripper Shank Lift - Stroke - 21.1 in -
    Cylinder Sizing - Ripper Shank Angle - Stroke - 26 in -
    Note (3) - Electro-hydraulic pilot valves assist operations of ripper and dozer controls. -
    Pump Output - - 17.2 gal/min
    Relief Valve Settings - - 2988 psi

    Dimensions (Approximate)
    Ground Clearance* - 28.5 in -
    Track Gauge - 100.4 in -
    Width - Without Trunnions - 610 mm/24 in ES - 130.4 in -
    Width - Over Trunnions - 148 in -
    Height - FOPS Cab* - 162.8 in -
    Height - Top of Stack* - 171.5 in -
    Height - ROPS/Canopy* - 173.5 in -
    Note (1) - *Includes grouser height for total dimensions on hard surfaces. -
    Length - Track on Ground - 152.8 in -
    Overall Length - Basic Tractor - 209.6 in -
    Length - With SU-Blade - 292 in -
    Length - With U-Blade - 305.1 in -
    Length - With Single-Shank Ripper - 278.8 in -
    Length - With Multi-Shank Ripper - 285.1 in -
    Overall Length - SU-Blade/SS Ripper - 360.6 in -

    FLUID CAPACITIES
    Cooling System Refill – Tier 4 Final Engine - 46.2 gal (US) -
    Engine Crankcase Sump - 27.2 gal (US) -
    Power Train - Total Volume - 81.4 gal (US) -
    Power Train - Refill Volume - 74.8 gal (US) -
    Final Drives (each) - 12.2 gal (US) -
    Track Roller Frames (each) - 16.9 gal (US) -
    Pivot Shaft Oil - 9.5 gal (US) -
    Hydraulic System Tank - 32.2 gal (US) -

    Ripper
    Type - - Parallelogram
    Number of Shanks - - 3
    Height - - 6.5 in
    Weight - - 1222 lb
    Maximum Digging Depth - - 13.3 in
    Maximum Ground Clearance Under Tip - - 17.6 in
    Overall Width - - 67.3 in
    Maximum Reach - Ground Line - - 30.2 in

    Cab
    FOPS - - ISO 3449:2005 Level II
    ROPS - - ISO 3471:2008

    Retrieval Winch
    Maximum Line Speed - Full Drum - - 79 ft/min
    Maximum Line Speed - Bare Drum - - 50 ft/min
    Weight - - 1747 lb
    Drum Capacity - Optional Cable - - 195 ft
    Rope Diameter - Recommended - - 0.63 in
    Winch Drive - - Hydraulic
    Rope Diameter - Optional - - 0.75 in
    Drum Capacity - Recommended Cable - - 277 ft
    Maximum Line Pull - Full Drum - - 20350 lb
    Speed - - Variable
    Maximum Line Pull - Bare Drum - - 32150 lb
    Control - - Hydraulic
    Overall width - - 27.91 in
    Drum Width - - 9.65 in
    Drum Diameter - - 8 in
    Winch Length - - 35.63 in
    Throat Clearance - - 5.6 in

    High Performance Winch
    Maximum line pull – bare drum - - 40000 lb
    Drum capacity – recommended cable - - 371 ft
    Winch length - - 27.76 in
    Overall width - - 29.2 in
    Control - - Hydraulic
    Maximum line speed – bare drum - - 131 ft/min
    Maximum line speed – full drum - - 207 ft/min
    Drum width - - 10.8 in
    Drum capacity – optional - - 256 ft
    Throat clearance - - 6.75 in
    Weight - - 1345 lb
    Rope diameter – recommended - - 0.63 in
    Speed - - Variable
    Maximum line pull – full drum - - 25000 lb
    Drum diameter - - 10 in
    Rope diameter – optional - - 0.75 in
    Winch drive - - Hydrostatic
    Add a Similar Product: