Compare

Compare Equipment Go Back

Engine - U.S. EPA Tier 4 Final/EU Stage V
	D11 Dozer View Product	854 Wheel Dozer View Product Remove	D9 Dozer View Product Remove
Engine Model	Cat® C32	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249 - Forward	850 HP	-	-
Displacement	1959 in³	-	1106 in³
Engine Power - Net SAE J1349/ISO 9249 - Reverse	955 HP	-	-
Note (1)	*Excludes all fan losses.	-	All Engine ratings apply at 1,750 rpm.
Note (2)	Engine ratings apply at 1,800 rpm.	-	No derating required up to 2499 m (8,200 ft).
Note (3)	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	-	-
Bore	-	-	5.7 in³
Stroke	-	-	7.2 in³
Engine Power - Gross SAE J1995	-	-	477 HP
Engine Power - ISO 14396	-	-	468 HP
Engine Power - Net SAE J1349/ISO 9249	-	-	440 HP
Emissions	-	-	U.S. EPA Tier 4 / EU Stage V
Weights
Operating Weight	229800 lb	224647 lb	110225 lb
Operating Weight - Carrydozer	250665 lb	-	-
Note (1)	D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.	-	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Note (2)	D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.	-	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Shipping Weight	-	-	84373 lb
Blades
Semi-Universal (SU)* Capacity	35.6 yd³	-	-
Semi-Universal (SU)* Width Over Endbits	219.8 in	-	-
U-Blade Capacity	45 yd³	-	-
U-Blade Width	249.6 in	-	-
Reclamation Universal - Blade capacity (SAE J1265)	55 yd³	-	-
Reclamation Universal - Width with blade (over end bits)	251.8 in	-	-
Carry Dozer - Blade capacity (SAE J1265)	57 yd³	-	-
Carry Dozer - Width with blade (over end bits)	263.9 in	-	-
Blade Capacities	-	30.5 to 44.8 m3 (40 to 58.6 yd3)	-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	Cat® C32	-	-
Displacement	1959 in³	-	-
Engine Power - Net SAE J1349/ISO 9249 - Forward	850 HP	-	-
Engine Power - Net SAE J1349/ISO 9249 - Reverse	957 HP	-	-
Note (1)	*Excludes all fan losses.	-	-
Note (2)	Engine ratings apply at 1,800 rpm.	-	-
Note (3)	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	-	-
Fuel Tank Capacities
Fuel Tank - Total Volume	500 gal (US)	-	-
Fuel Tank - Usable Volume	475 gal (US)	-	-
Hydraulic Controls
Pump Type	Variable displacement piston pump	-	Piston-type geared to flywheel
Combined Pump Output - Implement	177 gal/min	-	-
Pump Output - Steering	-	-	96 gal/min
Fan Pump	-	-	21 gal/min
Tilt Cylinder Flow - Rod End Flow	-	-	53 gal/min
Tilt Cylinder Flow - Head End Flow	-	-	53 gal/min
Lift Cylinder Relief Valve Setting	-	-	3800 lbf/in
Tilt Cylinder Relief Valve Setting	-	-	2799 psi
Ripper - Lift - Relief Valve Setting	-	-	3800 psi
Ripper - Pitch - Relief Valve Setting	-	-	3800 psi
Steering System - Pressure	-	-	5874 psi
Tank Capacity	-	-	24 gal/min
Note (1)	-	-	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Note (2)	-	-	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Note (3)	-	-	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Undercarriage
Shoe Type	Extreme Service	-	Extreme Service
Width - Shoe	28 in	-	24 in
Width - Shoe - CD	36 in	-	-
Shoes/Side	41	-	43
Grouser Height	4 in	-	3.3 in
Pitch	12.5 in	-	9.4 in
Ground Clearance*	30.6 in	-	-
Track Gauge	114 in	-	88.6 in
Length - Track on Ground	175 in	-	136.6 in
Ground Contact Area	9781 in²	-	45.6 ft²
Ground Contact Area - CD	12605 in²	-	-
Track Rollers/Side	8	-	8
Number of Carrier Rollers	1 per side (optional)	-	1 per side (optional)
Ground Clearance	-	-	18.1 in
Transmission
1.0 Forward	2.5 mile/h	-	2.2 mile/h
2.0 Forward	4.4 mile/h	-	3.9 mile/h
3.0 Forward	7.6 mile/h	-	6.8 mile/h
1.0 Reverse	3 mile/h	-	2.7 mile/h
2.0 Reverse	5.3 mile/h	-	4.8 mile/h
3.0 Reverse	9.1 mile/h	-	8.4 mile/h
Drawbar Pull - 3 Forward	46250 ft·lbf	-	-
Drawbar Pull - 1 Forward	148200 ft·lbf	-	-
Drawbar Pull - 2 Forward	82300 ft·lbf	-	-
Transmission Type	-	Cat Planetary Power Shift	-
Converter Drive - Forward 1	-	4.4 mile/h	-
Converter Drive - Forward 2	-	7.7 mile/h	-
Converter Drive - Forward 3	-	13.2 mile/h	-
Converter Drive - Reverse 1	-	4.8 mile/h	-
Converter Drive - Reverse 2	-	8.4 mile/h	-
Converter Drive - Reverse 3	-	14.6 mile/h	-
Direct Drive - Forward 1	-	Lock-up disabled	-
Direct Drive - Forward 2	-	8.1 mile/h	-
Direct Drive - Forward 3	-	14.2 mile/h	-
Direct Drive - Reverse 1	-	5 mile/h	-
Direct Drive - Reverse 2	-	8.9 mile/h	-
Direct Drive - Reverse 3	-	15.6 mile/h	-
Note	-	Travel speeds based on 45/65-45 L-5 46 ply tires.	-
Type	-	-	Planetary powershift
Ripper - Single Shank
Maximum penetration force * (shank vertical)	66000 lb	-	35520 lbf
Maximum penetration depth (standard tip)	63.5 in	-	48.5 in
Pryout Force	148510 lb	-	74637 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	34.7 in
Number of Pockets	-	-	1
Weight	-	-	10701 lb
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110205 lb
Note	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	66110 lb	-	38667 lbf
Maximum penetration depth (standard tip)	85.5 in	-	68 in
Pryout Force	148510 lb	-	74412 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	32.2 in
Number of Pockets	-	-	1
Weight	-	-	10981 lb
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110485 lb
Note	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width	131.1 in	-	-
Maximum Penetration Force - Shank Vertical	77350 lb	-	34621 lbf
Maximum Penetration - Standard Tip	43.3 in	-	31.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth	145640 lb	-	81156 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	34.6 in
Number of Pockets	-	-	3
Weight	-	-	12136 lb
Total Operating Weight* - With SU-Blade and Ripper	-	-	111739 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)	149.8 in	-	-
Length with SU-Blade** - No rear attachment	345.1 in	-	-
Overall Length SU-Blade and SS Ripper**	421.7 in	-	-
Service Refill Capacities
Cooling System	46.8 gal (US)	53 gal (US)	-
Cooling System Refill - Tier 2 Equivalent Engine	41.7 gal (US)	-	-
Engine Crankcase	35.1 gal (US)	-	-
Power Train	120 gal (US)	-	-
Power Train - Refill Volume	103.3 gal (US)	-	-
Final Drive - Each	12.4 gal (US)	-	-
Roller Frames - Each	24.8 gal (US)	-	-
Hydraulic Tank	42.2 gal (US)	-	-
Hydraulic System Tank and Chassis	64.7 gal (US)	-	-
Hydraulic System Chassis + Blade and Ripper (Standard)	117.6 gal (US)	-	-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)	143.4 gal (US)	-	-
Fuel Tank - Standard	-	413 gal (US)	-
Crankcase	-	32 gal (US)	-
Transmission	-	45 gal (US)	-
Differential - Final Drives - Front	-	98 gal (US)	-
Differential - Final Drives - Rear	-	90 gal (US)	-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only	-	77 gal (US)	-
Note (1)	-	- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo	-
Standards
ROPS	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008	-	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II	-	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound (1)	The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).	-	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Sound (2)	The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).	-	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Sound	-	-	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Dimensions - D11
Ground Clearance*	31.4 in	-	-
Track Gauge	114 in	-	-
Width at Outside of Track (710 mm Track Shoe)	142 in	-	-
Height (ROPS/canopy)*	185.9 in	-	-
Length of Track on Ground	175 in	-	-
Length with SU-Blade** - No rear attachment	337.8 in	-	-
Overall Length SU-Blade and SS Ripper**	414.4 in	-	-
Note	*Includes grouser height for total dimensions on hard surfaces.	-	-
Air Conditioning System
Note (1)	The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)	-	-
Air Conditioning	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
Engine
Engine Model	-	Cat C32B	-
Gross Power	-	907 HP	-
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995	-	900 HP	-
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249	-	814 HP	-
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995	-	907 HP	-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249	-	823 HP	-
Rated Speed	-	1750 r/min	-
Bore	-	5.7 in	-
Stroke	-	6.4 in	-
Displacement	-	1958 in²	-
Peak Torque - 1,200 rpm	-	3139 lb/ft	-
Torque Rise	-	30 %	-
Note (1)	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Note (2)	-	Net torque rise meets SAE J139.	-
Note (3)	-	No engine derating required up to 3050 m (10,000 ft) altitude.	-
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)	-	161 gal/min	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	177 mm × 1760 mm (0.58 ft × 5.8 ft)	-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke	-	267 mm × 286 mm (0.88 ft × 0.94 ft)	-
Axles
Front	-	Fixed	-
Rear	-	Trunnion	-
Brakes
Brakes	-	Meets ISO 3540:2011	-
Dimensions (Approximate)
Height - Top of ROPS	-	18.25 ft	-
Height - Top of Exhaust Pipe	-	17.17 ft	-
Height - Top of Hood	-	13 ft	-
Ground Clearance	-	27 in	-
Centerline of Front Axle to Hitch	-	9.67 ft	-
Centerline of Rear Axle to Edge of Bumper	-	13.75 ft	-
Wheel Base	-	19.25 ft	-
Length - With Blade on Ground	-	44 ft	-
Ground Clearance*	-	-	18.1 in
Track Gauge	-	-	88.6 in
Width - Without Trunnions - Standard Shoe	-	-	113 in
Width - Over Trunnions	-	-	130.3 in
Height - FOPS Cab*	-	-	150.4 in
Height - Top of Stack*	-	-	152.6 in
Height - ROPS/Canopy*	-	-	157.5 in
Drawbar Height (Center of Clevis)*	-	-	30 in
Length - Track on Ground	-	-	136.6 in
Overall Length - Basic Tractor	-	-	193.3 in
Length - Basic Tractor - With Drawbar	-	-	206.4 in
Length - Basic Tractor - With Winch	-	-	218.3 in
Length - With SU-Blade**	-	-	259.9 in
Length - With U-Blade	-	-	274.3 in
Length - With Single-Shank Ripper	-	-	257 in
Length - With Multi-Shank Ripper	-	-	257.4 in
Overall Length - SU-Blade/SS Ripper	-	-	323.6 in
Note (1)	-	-	*Includes grouser height for total dimensions on hard surfaces.
Hydraulic System - Steering
Steering System - Pump	-	Piston, variable displacement	-
Minimum Turning Radius - Over Blade	-	31 ft	-
Steering System - Circuit	-	Pilot, load sensing	-
Total Steering Angle	-	86 degrees	-
Relief Valve Setting	-	5004 psi	-
Operating Specifications
Operating Weight	-	224647 lb	-
Sound Performance Levels
Sound Performance	-	• The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was	-
Cab
ROPS/FOPS	-	ISO 3471:2008 and ISO 3449:2005 Level II Standards	-
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model	-	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249	-	-	452 HP
Bore	-	-	5.7 in³
Stroke	-	-	7.2 in
Displacement	-	-	1106 in³
Engine Power - Gross SAE J1995	-	-	487 HP
Engine Power - ISO 14396	-	-	479 HP
Emissions	-	-	U.S. EPA Tier 2 or Tier 3 equivalent
Note (1)	-	-	All engine ratings apply at 1,750 rpm.
Note (2)	-	-	No derating required up to 4267 m (14,000 ft) altitude.
Steering and Brakes
Steering Type	-	-	Differential
Brake Type	-	-	Spring Applied Wet Disc
Brake Diameter	-	-	15.5 in
Brake Count	-	-	8
FLUID CAPACITIES
Fuel Tank (Splash Fill)	-	-	254 gal (US)
DEF Tank (Tier 4 only)	-	-	9.5 gal (US)
Fuel Tank (Fast Fill)	-	-	248 gal (US)
Cooling System	-	-	21 gal (US)
Engine Crankcase*	-	-	10 gal (US)
Powertrain	-	-	40 gal (US)
Final Drives (each)	-	-	4 gal (US)
Roller Frames (each)	-	-	12 gal (US)
Pivot Shaft Oil	-	-	8 gal (US)
Hydraulic System Tank	-	-	24 gal (US)
Note	-	-	*With oil filters.
Note 2	-	-	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3	-	-	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4	-	-	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Blade - Semi-Universal
Blade Capacity (SAE J1265)	-	-	17.8 yd³
Blade Width (over end bits)	-	-	171.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	37 in
Blade Weight	-	-	10587 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	110205 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade - Universal
Blade Capacity (SAE J1265)	-	-	21.7 yd³
Blade Width (over end bits)	-	-	184.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	39.9 in
Blade Weight	-	-	12016 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	111362 lb
Note	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Winches
Winch Model	-	-	PA 140VS
Weight*	-	-	3950 lb
Oil Capacity	-	-	4 gal (US)
Drum Width	-	-	12.6 in
Wire Cable Diameter - Recommended	-	-	1.13 in
Wire Cable Diameter - Optional	-	-	1.25 ft
Maximum Drum Capacity - Recommended Cable Length	-	-	257 in
Maximum Drum Capacity - Optional Cable Length	-	-	204 ft
Wire Cable Ferrule Size - Outside Diameter	-	-	2.4 in
Wire Cable Ferrule Size - Length	-	-	2.8 in
Note	-	-	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)	-	-	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.

Compare Equipment Go Back

D11 Dozer

854 Wheel Dozer

D9 Dozer

Engine - U.S. EPA Tier 4 Final/EU Stage V

Weights

Blades

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Hydraulic Controls

Undercarriage

Transmission

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Ripper - Multi-Shank, Adjustable Parallelogram

Dimensions - D11 Carrydozer

Service Refill Capacities

Standards

Dimensions - D11

Air Conditioning System

Engine

Hydraulic System - Lift/Tilt

Axles

Brakes

Dimensions (Approximate)

Hydraulic System - Steering

Operating Specifications

Sound Performance Levels

Cab

Engine - U.S. EPA Tier 2/3 Equivalent

Steering and Brakes

FLUID CAPACITIES

Blade - Semi-Universal

Blade - Universal

Winches

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us