CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D11 Dozer
    View Product
    D7 Dozer
    View Product Remove
    854 Wheel Dozer
    View Product Remove

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C32 - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP - -
    Displacement 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 955 HP - -
    Note (1) *Excludes all fan losses. - -
    Note (2) Engine ratings apply at 1,800 rpm. - -
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Weights
    Operating Weight 229800 lb 65644 lb 224647 lb
    Operating Weight - Carrydozer 250665 lb - -
    Note (1) D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. -
    Note (2) D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. - -

    Blades
    Semi-Universal (SU)* Capacity 35.6 yd³ - -
    Semi-Universal (SU)* Width Over Endbits 219.8 in - -
    U-Blade Capacity 45 yd³ - -
    U-Blade Width 249.6 in - -
    Reclamation Universal - Blade capacity (SAE J1265) 55 yd³ - -
    Reclamation Universal - Width with blade (over end bits) 251.8 in - -
    Carry Dozer - Blade capacity (SAE J1265) 57 yd³ - -
    Carry Dozer - Width with blade (over end bits) 263.9 in - -
    Blade Capacities - - 30.5 to 44.8 m3 (40 to 58.6 yd3)

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model Cat® C32 - -
    Displacement 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 957 HP - -
    Note (1) *Excludes all fan losses. - -
    Note (2) Engine ratings apply at 1,800 rpm. - -
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Fuel Tank Capacities
    Fuel Tank - Total Volume 500 gal (US) - -
    Fuel Tank - Usable Volume 475 gal (US) - -

    Hydraulic Controls
    Pump Type Variable displacement piston pump - -
    Combined Pump Output - Implement 177 gal/min - -

    Undercarriage
    Shoe Type Extreme Service - -
    Width - Shoe 28 in - -
    Width - Shoe - CD 36 in - -
    Shoes/Side 41 - -
    Grouser Height 4 in - -
    Pitch 12.5 in - -
    Ground Clearance* 30.6 in - -
    Track Gauge 114 in - -
    Length - Track on Ground 175 in - -
    Ground Contact Area 9781 in² - -
    Ground Contact Area - CD 12605 in² - -
    Track Rollers/Side 8 - -
    Number of Carrier Rollers 1 per side (optional) - -

    Transmission
    1.0 Forward 2.5 mile/h - -
    2.0 Forward 4.4 mile/h - -
    3.0 Forward 7.6 mile/h - -
    1.0 Reverse 3 mile/h - -
    2.0 Reverse 5.3 mile/h - -
    3.0 Reverse 9.1 mile/h - -
    Drawbar Pull - 3 Forward 46250 ft·lbf - -
    Drawbar Pull - 1 Forward 148200 ft·lbf - -
    Drawbar Pull - 2 Forward 82300 ft·lbf - -
    Power Train - Fully Automatic 4-Speed -
    Transmission Type - - Cat Planetary Power Shift
    Converter Drive - Forward 1 - - 4.4 mile/h
    Converter Drive - Forward 2 - - 7.7 mile/h
    Converter Drive - Forward 3 - - 13.2 mile/h
    Converter Drive - Reverse 1 - - 4.8 mile/h
    Converter Drive - Reverse 2 - - 8.4 mile/h
    Converter Drive - Reverse 3 - - 14.6 mile/h
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Forward 2 - - 8.1 mile/h
    Direct Drive - Forward 3 - - 14.2 mile/h
    Direct Drive - Reverse 1 - - 5 mile/h
    Direct Drive - Reverse 2 - - 8.9 mile/h
    Direct Drive - Reverse 3 - - 15.6 mile/h
    Note - - Travel speeds based on 45/65-45 L-5 46 ply tires.

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 66000 lb - -
    Maximum penetration depth (standard tip) 63.5 in - -
    Pryout Force 148510 lb - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 66110 lb - -
    Maximum penetration depth (standard tip) 85.5 in - -
    Pryout Force 148510 lb - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width 131.1 in - -
    Maximum Penetration Force - Shank Vertical 77350 lb - -
    Maximum Penetration - Standard Tip 43.3 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth 145640 lb - -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) 149.8 in - -
    Length with SU-Blade** - No rear attachment 345.1 in - -
    Overall Length SU-Blade and SS Ripper** 421.7 in - -

    Service Refill Capacities
    Cooling System 46.8 gal (US) - 53 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine 41.7 gal (US) - -
    Engine Crankcase 35.1 gal (US) - -
    Power Train 120 gal (US) - -
    Power Train - Refill Volume 103.3 gal (US) - -
    Final Drive - Each 12.4 gal (US) - -
    Roller Frames - Each 24.8 gal (US) - -
    Hydraulic Tank 42.2 gal (US) - -
    Hydraulic System Tank and Chassis 64.7 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Standard) 117.6 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) 143.4 gal (US) - -
    Fuel Tank - 123 gal (US) -
    DEF Tank - 12 gal (US) -
    Fuel Tank - Standard - - 413 gal (US)
    Crankcase - - 32 gal (US)
    Transmission - - 45 gal (US)
    Differential - Final Drives - Front - - 98 gal (US)
    Differential - Final Drives - Rear - - 90 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - - 77 gal (US)
    Note (1) - - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 - -
    FOPS Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II - -
    Sound (1) The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). - -
    Sound (2) The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). - -

    Dimensions - D11
    Ground Clearance* 31.4 in - -
    Track Gauge 114 in - -
    Width at Outside of Track (710 mm Track Shoe) 142 in - -
    Height (ROPS/canopy)* 185.9 in - -
    Length of Track on Ground 175 in - -
    Length with SU-Blade** - No rear attachment 337.8 in - -
    Overall Length SU-Blade and SS Ripper** 414.4 in - -
    Note *Includes grouser height for total dimensions on hard surfaces. - -

    Air Conditioning System
    Note (1) The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) - -
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Engine
    Engine Model - Cat C9.3B Cat C32B
    Power - Net - 265 HP -
    Net Power - Rated - ISO 9249/SAE J1349 - 265 HP -
    Net Power (Rated) - ISO 9249 (DIN) - 268 mhp -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV -
    Note (1) - Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
    Note (2) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( Net torque rise meets SAE J139.
    Note (3) - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. No engine derating required up to 3050 m (10,000 ft) altitude.
    Note (4) - Machine Build Number 17A -
    Gross Power - - 907 HP
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - - 900 HP
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - - 814 HP
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - - 907 HP
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - - 823 HP
    Rated Speed - - 1750 r/min
    Bore - - 5.7 in
    Stroke - - 6.4 in
    Displacement - - 1958 in²
    Peak Torque - 1,200 rpm - - 3139 lb/ft
    Torque Rise - - 30 %

    Standard SU
    Operating Weight - 65644 lb -
    Ground Pressure - 10 psi -
    Width of Standard Shoe - 24 in -
    Blade - Semi-Universal (SU) -
    Blade Capacity - 10 yd³ -

    LGP S
    Operating Weight - 63220 lb -
    Ground Pressure - 6 psi -
    Width of Standard Shoe - 36 in -
    Blade - Straight (S) -
    Blade Capacity - 8 yd³ -

    Waste Handler
    Operating Weight - 62035 lb -
    Ground Pressure - 10 psi -
    Width of Standard Shoe - 24 in -
    Blade - Universal Landfill (U) -
    Blade Capacity - 22 yd³ -

    Sustainability
    Recyclability - 98% -

    Note (2) - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. -

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - - 161 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 177 mm × 1760 mm (0.58 ft × 5.8 ft)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - 267 mm × 286 mm (0.88 ft × 0.94 ft)

    Axles
    Front - - Fixed
    Rear - - Trunnion

    Brakes
    Brakes - - Meets ISO 3540:2011

    Dimensions (Approximate)
    Height - Top of ROPS - - 18.25 ft
    Height - Top of Exhaust Pipe - - 17.17 ft
    Height - Top of Hood - - 13 ft
    Ground Clearance - - 27 in
    Centerline of Front Axle to Hitch - - 9.67 ft
    Centerline of Rear Axle to Edge of Bumper - - 13.75 ft
    Wheel Base - - 19.25 ft
    Length - With Blade on Ground - - 44 ft

    Hydraulic System - Steering
    Steering System - Pump - - Piston, variable displacement
    Minimum Turning Radius - Over Blade - - 31 ft
    Steering System - Circuit - - Pilot, load sensing
    Total Steering Angle - - 86 degrees
    Relief Valve Setting - - 5004 psi

    Operating Specifications
    Operating Weight - - 224647 lb

    Sound Performance Levels
    Sound Performance - - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was

    Cab
    ROPS/FOPS - - ISO 3471:2008 and ISO 3449:2005 Level II Standards
    Add a Similar Product: