CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D9 Dozer
    View Product
    844 Wheel Dozer
    View Product Remove
    D2 Dozer
    View Product Remove

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model Cat® C18 - -
    Engine Power - Net SAE J1349/ISO 9249 452 HP - -
    Bore 5.7 in³ - -
    Stroke 7.2 in - -
    Displacement 1106 in³ - -
    Engine Power - Gross SAE J1995 487 HP - -
    Engine Power - ISO 14396 479 HP - -
    Emissions U.S. EPA Tier 2 or Tier 3 equivalent - -
    Note (1) All engine ratings apply at 1,750 rpm. - -
    Note (2) No derating required up to 4267 m (14,000 ft) altitude. - -

    Weights
    Operating Weight 110225 lb - 18382 lb
    Shipping Weight 84373 lb - -
    Note (1) D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. - For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - 19066 lb

    Undercarriage
    Shoe Type Extreme Service - -
    Width - Shoe 24 in - -
    Shoes/Side 43 - -
    Grouser Height 3.3 in - -
    Pitch 9.4 in - -
    Ground Clearance 18.1 in - -
    Track Gauge 88.6 in - 61 in
    Length - Track on Ground 136.6 in - -
    Ground Contact Area 45.6 ft² - -
    Track Rollers/Side 8 - -
    Number of Carrier Rollers 1 per side (optional) - -
    Length - Track on Ground - LGP - - 89 in
    Number of Rollers - Each Side - - 7
    Track Gauge - LGP - - 68 in
    Ground Pressure - LGP - - 4.3 psi
    Shoe Width - Standard - - 18 in
    Shoe Width - LGP - - 25 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 43
    Number of Shoes - Each Side - Abrasion Undercarriage - - 38
    Ground Pressure - - 5.7 psi
    Length of Track on Ground - - 89 in

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. - -
    FOPS Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. - -
    Sound The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling - -
    Sound (1) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c - -
    Sound (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. - -

    Steering and Brakes
    Steering Type Differential - -
    Brake Type Spring Applied Wet Disc - -
    Brake Diameter 15.5 in - -
    Brake Count 8 - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C18 - -
    Bore 5.7 in³ - -
    Stroke 7.2 in³ - -
    Displacement 1106 in³ - -
    Engine Power - Gross SAE J1995 477 HP - -
    Engine Power - ISO 14396 468 HP - -
    Engine Power - Net SAE J1349/ISO 9249 440 HP - -
    Emissions U.S. EPA Tier 4 / EU Stage V - -
    Note (1) All Engine ratings apply at 1,750 rpm. - -
    Note (2) No derating required up to 2499 m (8,200 ft). - -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) 254 gal (US) - -
    DEF Tank (Tier 4 only) 9.5 gal (US) - -
    Fuel Tank (Fast Fill) 248 gal (US) - -
    Cooling System 21 gal (US) - -
    Engine Crankcase* 10 gal (US) - -
    Powertrain 40 gal (US) - -
    Final Drives (each) 4 gal (US) - -
    Roller Frames (each) 12 gal (US) - -
    Pivot Shaft Oil 8 gal (US) - -
    Hydraulic System Tank 24 gal (US) - -
    Note *With oil filters. - -
    Note 2 Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - -
    Note 3 All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - -
    Note 4 Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - -

    Hydraulic Controls
    Pump Type Piston-type geared to flywheel - -
    Pump Output - Steering 96 gal/min - -
    Fan Pump 21 gal/min - -
    Tilt Cylinder Flow - Rod End Flow 53 gal/min - -
    Tilt Cylinder Flow - Head End Flow 53 gal/min - -
    Lift Cylinder Relief Valve Setting 3800 lbf/in - -
    Tilt Cylinder Relief Valve Setting 2799 psi - -
    Ripper - Lift - Relief Valve Setting 3800 psi - -
    Ripper - Pitch - Relief Valve Setting 3800 psi - -
    Steering System - Pressure 5874 psi - -
    Tank Capacity 24 gal/min - -
    Note (1) Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). - -
    Note (2) Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). - -
    Note (3) Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) - -
    Pump Output - - 17.2 gal/min
    Relief Valve Settings - - 2988 psi

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Transmission
    1.0 Forward 2.2 mile/h - -
    2.0 Forward 3.9 mile/h - -
    3.0 Forward 6.8 mile/h - -
    1.0 Reverse 2.7 mile/h - -
    2.0 Reverse 4.8 mile/h - -
    3.0 Reverse 8.4 mile/h - -
    Type Planetary powershift - -
    Transmission Type - Cat Planetary Power Shift -
    Converter Drive - Forward 1 - 4.5 mile/h -
    Converter Drive - Forward 2 - 8.3 mile/h -
    Converter Drive - Forward 3 - 14.2 mile/h -
    Converter Drive - Reverse 1 - 4.9 mile/h -
    Converter Drive - Reverse 2 - 9.1 mile/h -
    Converter Drive - Reverse 3 - 15.5 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 8.5 mile/h -
    Direct Drive - Forward 3 - 15.2 mile/h -
    Direct Drive - Reverse 1 - 5.4 mile/h -
    Direct Drive - Reverse 2 - 9.6 mile/h -
    Direct Drive - Reverse 3 - 16.4 mile/h -
    Drive Pumps - - 1
    Maximum Travel Speed - Forward - - 5.6 mile/h
    Relief Valve Settings - - 7033 psi
    Maximum Travel Speed - Reverse - - 6.2 mile/h
    Track Motors - - 2

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) 17.8 yd³ - -
    Blade Width (over end bits) 171.3 in - -
    Blade Height 76.1 in - -
    Maximum Digging Depth 23.9 in - -
    Ground Clearance at Full Lift 56 in - -
    Maximum Tilt 37 in - -
    Blade Weight 10587 lb - -
    Total Operating Weight* (with blade and single-shank ripper) 110205 lb - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Blade - Universal
    Blade Capacity (SAE J1265) 21.7 yd³ - -
    Blade Width (over end bits) 184.3 in - -
    Blade Height 76.1 in - -
    Maximum Digging Depth 23.9 in - -
    Ground Clearance at Full Lift 56 in - -
    Maximum Tilt 39.9 in - -
    Blade Weight 12016 lb - -
    Total Operating Weight* (with blade and single-shank ripper) 111362 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 35520 lbf - -
    Maximum penetration depth (standard tip) 48.5 in - -
    Pryout Force 74637 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.7 in - -
    Number of Pockets 1 - -
    Weight 10701 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) 110205 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 38667 lbf - -
    Maximum penetration depth (standard tip) 68 in - -
    Pryout Force 74412 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 32.2 in - -
    Number of Pockets 1 - -
    Weight 10981 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) 110485 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical 34621 lbf - -
    Maximum Penetration - Standard Tip 31.4 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth 81156 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.6 in - -
    Number of Pockets 3 - -
    Weight 12136 lb - -
    Total Operating Weight* - With SU-Blade and Ripper 111739 lb - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Dimensions (Approximate)
    Ground Clearance* 18.1 in - -
    Track Gauge 88.6 in - -
    Width - Without Trunnions - Standard Shoe 113 in - -
    Width - Over Trunnions 130.3 in - -
    Height - FOPS Cab* 150.4 in - -
    Height - Top of Stack* 152.6 in - -
    Height - ROPS/Canopy* 157.5 in - -
    Drawbar Height (Center of Clevis)* 30 in - -
    Length - Track on Ground 136.6 in - -
    Overall Length - Basic Tractor 193.3 in - -
    Length - Basic Tractor - With Drawbar 206.4 in - -
    Length - Basic Tractor - With Winch 218.3 in - -
    Length - With SU-Blade** 259.9 in - -
    Length - With U-Blade 274.3 in - -
    Length - With Single-Shank Ripper 257 in - -
    Length - With Multi-Shank Ripper 257.4 in - -
    Overall Length - SU-Blade/SS Ripper 323.6 in - -
    Note (1) *Includes grouser height for total dimensions on hard surfaces. - -
    Height - Top of ROPS - 17.2 ft -
    Height - Top of Exhaust Pipe - 16.6 ft -
    Height - Top of Hood - 12.7 ft -
    Ground Clearance - 2 ft -
    Centerline of Front Axle to Hitch - 7.5 ft -
    Centerline of Rear Axle to Edge of Bumper - 12.5 ft -
    Wheel Base - 15.1 ft -
    Length - With Blade on Ground - 36.5 ft -

    Winches
    Winch Model PA 140VS - -
    Weight* 3950 lb - -
    Oil Capacity 4 gal (US) - -
    Drum Width 12.6 in - -
    Wire Cable Diameter - Recommended 1.13 in - -
    Wire Cable Diameter - Optional 1.25 ft - -
    Maximum Drum Capacity - Recommended Cable Length 257 in - -
    Maximum Drum Capacity - Optional Cable Length 204 ft - -
    Wire Cable Ferrule Size - Outside Diameter 2.4 in - -
    Wire Cable Ferrule Size - Length 2.8 in - -
    Note *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - -
    Note (2) Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - -

    Engine
    Engine Model - C27 Cat® Cat® C3.6
    Rated Speed - 1800 r/min -
    Gross Power - ISO 14396 - 752 HP -
    Gross Power - SAE J1995 - 766 HP -
    Net Power - SAE J1349 - Standard Ambient - 699 HP -
    Net Power - SAE J1349 - High Ambient - 648 HP -
    Bore - 5.4 in -
    Stroke - 6 in -
    Displacement - 1649.5 in³ 220 in³
    Peak Torque - Speed - 2624 lb/ft -
    Torque Rise - 18 % -
    Emissions - U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2 -
    Power - Net - - 92 HP
    Net Power - 2,200 rpm - SAE J1349 - - 92 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 92 HP
    Note (1) - - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Power Train - - Hydrostatic
    Note (2) - - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

    Operating Specifications
    Operating Weight - 165089 lb -
    Blade Capacities - 15.9 - 30.7 m3 (20.7 - 40.2 yd3) -

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - 82 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - 133 mm × 1535 mm (5.25 in × 60.4 in) -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 210 mm × 188 mm (8.25 in × 7.4 in) -
    Relief Valve Setting - Bulldozer (Large Pump) - 2700 psi -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - 2920 psi -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Piston, variable displacement -
    Minimum Turning Radius - Over Blade - 34 ft -
    Total Steering Angle - 35 ° -
    Maximum Flow - 94.3 gal/min -
    Relief Valve Setting - 4500 psi -

    Service Refill Capacities
    Fuel Tank - Standard - 286.6 gal (US) -
    Cooling System - 54.9 gal (US) 5 gal (US)
    Crankcase - 20 gal (US) -
    Transmission - 29.1 gal (US) -
    Differential - Final Drives - Front - 71.6 gal (US) -
    Differential - Final Drives - Rear - 68.9 gal (US) -
    Hydraulic System - Implement and Hydraulic Fan - 68.9 gal (US) -
    Hydraulic System - Steering and Braking - 34.9 gal (US) -
    Fuel Tank - - 51.5 gal (US)
    Crankcase - With Filter - - 2.8 gal (US)
    Final Drive - Each - LGP - - 2.6 gal (US)
    Transmission - Hydraulic Tank - - 23.8 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US)
    Final Drives - Each Side - - 2.6 gal (US)

    Axles
    Front - Fixed -
    Rear - Trunnion -
    Oscillation Angle - 8.5 ° -

    Brakes
    Brakes - Meets ISO 3540:2011 -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards -
    FOPS - - ISO 3449:2005 Level II
    ROPS - - ISO 3471:2008

    Ripper
    Type - - Parallelogram
    Number of Shanks - - 3
    Height - - 6.5 in
    Weight - - 1222 lb
    Maximum Digging Depth - - 13.3 in
    Maximum Ground Clearance Under Tip - - 17.6 in
    Overall Width - - 67.3 in
    Maximum Reach - Ground Line - - 30.2 in

    Dimensions
    Length of Basic Dozer (without blade) - LGP - - 129.5 in
    Width of Dozer (standard shoes, no blade) - Standard - - 79.1 in
    Dozer Height - LGP - - 108.9 in
    Dozer Height - Standard - - 108.9 in
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in
    Length of Basic Dozer (without blade) - Standard - - 129.5 in
    BLADE: Digging Depth - LGP - - 23.2 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58°
    BLADE: Blade Lift Height - LGP - - 27.9 in
    BLADE: Blade Width - LGP - - 124 in
    BLADE: Blade Width at Maximum Angle - LGP - - 113.1 in
    Track Gauge - LGP - - 67.9 in
    Ground Clearance - LGP - - 13 in
    BLADE: Blade Height - LGP - - 35.8 in
    Overall Length - With Blade - LGP - - 168.2 in
    BLADE: Blade Capacity (SAE) - LGP - - 2.42 yd³
    BLADE: Maximum Tilt - LGP - - 17.2 in
    BLADE: Maximum Angle (either side) - LGP - - 25°
    BLADE: Maximum Angle (either side) - Standard - - 25°
    Ground Clearance - Standard - - 13 in
    Overall Length - With Blade - Standard - - 168.5 in
    Note - - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58°
    BLADE: Maximum Tilt - Standard - - 15.2 in
    Track Gauge - Standard - - 61 in
    BLADE: Digging Depth - Standard - - 23.3 in
    BLADE: Blade Width - Standard - - 109.5 in
    BLADE: Blade Lift Height - Standard - - 29.3 in
    BLADE: Blade Capacity (SAE) - Standard - - 2.59 yd³
    BLADE: Blade Width at Maximum Angle - Standard - - 100.1 in
    BLADE: Blade Height - Standard - - 39.8 in

    Retrieval Winch
    Maximum Line Speed - Full Drum - - 79 ft/min
    Maximum Line Speed - Bare Drum - - 50 ft/min
    Weight - - 1747 lb
    Drum Capacity - Optional Cable - - 195 ft
    Rope Diameter - Recommended - - 0.63 in
    Winch Drive - - Hydraulic
    Rope Diameter - Optional - - 0.75 in
    Drum Capacity - Recommended Cable - - 277 ft
    Maximum Line Pull - Full Drum - - 20350 lb
    Speed - - Variable
    Maximum Line Pull - Bare Drum - - 32150 lb
    Control - - Hydraulic
    Overall width - - 27.91 in
    Drum Width - - 9.65 in
    Drum Diameter - - 8 in
    Winch Length - - 35.63 in
    Throat Clearance - - 5.6 in

    High Performance Winch
    Maximum line pull – bare drum - - 40000 lb
    Drum capacity – recommended cable - - 371 ft
    Winch length - - 27.76 in
    Overall width - - 29.2 in
    Control - - Hydraulic
    Maximum line speed – bare drum - - 131 ft/min
    Maximum line speed – full drum - - 207 ft/min
    Drum width - - 10.8 in
    Drum capacity – optional - - 256 ft
    Throat clearance - - 6.75 in
    Weight - - 1345 lb
    Rope diameter – recommended - - 0.63 in
    Speed - - Variable
    Maximum line pull – full drum - - 25000 lb
    Drum diameter - - 10 in
    Rope diameter – optional - - 0.75 in
    Winch drive - - Hydrostatic
    Add a Similar Product: