CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    844 Wheel Dozer
    View Product Remove
    D2 Dozer
    View Product Remove
    834 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B C27 Cat® Cat® C3.6 Cat® C18
    Power - Net 265 HP - 92 HP -
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2 - U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2.
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - - -
    Note (4) Machine Build Number 17A - - -
    Rated Speed - 1800 r/min - 1900 r/min
    Gross Power - ISO 14396 - 752 HP - -
    Gross Power - SAE J1995 - 766 HP - 562 HP
    Net Power - SAE J1349 - Standard Ambient - 699 HP - -
    Net Power - SAE J1349 - High Ambient - 648 HP - -
    Bore - 5.4 in - 5.7 in
    Stroke - 6 in - 7.2 in
    Displacement - 1649.5 in³ 220 in³ 1105 in³
    Peak Torque - Speed - 2624 lb/ft - -
    Torque Rise - 18 % - 52 %
    Net Power - 2,200 rpm - SAE J1349 - - 92 HP -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 92 HP -
    Power Train - - Hydrostatic -
    Peak Power Speed - - - 1500 r/min
    Net Power - SAE J1349 - - - 496 HP
    Peak Torque - 1,300 rpm - - - 2092 lb/ft

    Weights
    Operating Weight 65644 lb - 18382 lb -
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. -
    Operating Weight - LGP - - 19066 lb -
    Note (2) - - For machine with ripper, add 554 kg (1,222 lb). -

    Transmission
    Power Train Fully Automatic 4-Speed - - -
    Transmission Type - Cat Planetary Power Shift - Cat planetary power shift
    Converter Drive - Forward 1 - 4.5 mile/h - -
    Converter Drive - Forward 2 - 8.3 mile/h - -
    Converter Drive - Forward 3 - 14.2 mile/h - -
    Converter Drive - Reverse 1 - 4.9 mile/h - -
    Converter Drive - Reverse 2 - 9.1 mile/h - -
    Converter Drive - Reverse 3 - 15.5 mile/h - -
    Direct Drive - Forward 1 - Lock-up disabled - Lock-up disabled
    Direct Drive - Forward 2 - 8.5 mile/h - 7.7 mile/h
    Direct Drive - Forward 3 - 15.2 mile/h - 13.7 mile/h
    Direct Drive - Reverse 1 - 5.4 mile/h - 4.5 mile/h
    Direct Drive - Reverse 2 - 9.6 mile/h - 8.1 mile/h
    Direct Drive - Reverse 3 - 16.4 mile/h - 14.3 mile/h
    Drive Pumps - - 1 -
    Maximum Travel Speed - Forward - - 5.6 mile/h -
    Relief Valve Settings - - 7033 psi -
    Maximum Travel Speed - Reverse - - 6.2 mile/h -
    Track Motors - - 2 -
    Forward - 1 - - - 4.2 mile/h
    Forward - 2 - - - 7.2 mile/h
    Forward - 3 - - - 12.6 mile/h
    Forward - 4 - - - 22 mile/h
    Reverse - 1 - - - 4.2 mile/h
    Reverse - 2 - - - 7.6 mile/h
    Reverse - 3 - - - 13.3 mile/h
    Direct Drive - Forward 4 - - - 23.9 mile/h

    Service Refill Capacities
    Fuel Tank 123 gal (US) - 51.5 gal (US) 209.5 gal (US)
    DEF Tank 12 gal (US) - - -
    Fuel Tank - Standard - 286.6 gal (US) - -
    Cooling System - 54.9 gal (US) 5 gal (US) 31.7 gal (US)
    Crankcase - 20 gal (US) - 15.9 gal (US)
    Transmission - 29.1 gal (US) - 31.7 gal (US)
    Differential - Final Drives - Front - 71.6 gal (US) - 49.1 gal (US)
    Differential - Final Drives - Rear - 68.9 gal (US) - 49.1 gal (US)
    Hydraulic System - Implement and Hydraulic Fan - 68.9 gal (US) - -
    Hydraulic System - Steering and Braking - 34.9 gal (US) - -
    Crankcase - With Filter - - 2.8 gal (US) -
    Final Drive - Each - LGP - - 2.6 gal (US) -
    Transmission - Hydraulic Tank - - 23.8 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US) -
    Final Drives - Each Side - - 2.6 gal (US) -
    Diesel Exhaust Fluid Tank - - - 8.7 gal (US)
    Hydraulic System Factory Fill - - - 63.4 gal (US)
    Hydraulic System - Tank Only - - - 37 gal (US)

    Standard SU
    Operating Weight 65644 lb - - -
    Ground Pressure 10 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 10 yd³ - - -

    LGP S
    Operating Weight 63220 lb - - -
    Ground Pressure 6 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade Straight (S) - - -
    Blade Capacity 8 yd³ - - -

    Waste Handler
    Operating Weight 62035 lb - - -
    Ground Pressure 10 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Universal Landfill (U) - - -
    Blade Capacity 22 yd³ - - -

    Sustainability
    Recyclability 98% - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - - -

    Operating Specifications
    Operating Weight - 165089 lb - 105271 lb
    Blade Capacities - 15.9 - 30.7 m3 (20.7 - 40.2 yd3) - 7.9 – 22.2 m3 (10.3 – 29.0 yd3)
    Coal Scoop Operating Weight - - - 112428 lb
    Chip Scoop Operating Weight - - - 112838 lb

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - 82 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 133 mm × 1535 mm (5.25 in × 60.4 in) - 139.75 mm × 1021 mm (5.5 in × 40.2 in)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 210 mm × 188 mm (8.25 in × 7.4 in) - -
    Relief Valve Setting - Bulldozer (Large Pump) - 2700 psi - -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - 2920 psi - -
    Lift/Tilt System - Circuit - - - Pilot operated LS valve with EH
    Lift/Tilt System - - - Variable displacement piston
    Maximum Flow at 1,900 rpm - - - 153 gal/min
    Relief Valve Setting - Lift/Tilt - - - 4641 psi
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - - 140 mm × 230 mm (5.5 in × 9.1 in)
    Pilot System - - - Variable displacement piston
    Pilot Maximum Flow - - - 13.7 gal/min
    Pilot Relief Valve Setting - - - 580 psi

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing - Pilot, load sensing
    Steering System - Pump - Piston, variable displacement - Piston, variable displacement
    Minimum Turning Radius - Over Blade - 34 ft - -
    Total Steering Angle - 35 ° - 86 °
    Maximum Flow - 94.3 gal/min - 65.8 gal/min
    Relief Valve Setting - 4500 psi - -
    Relief Valve Setting - Steering - - - 3495 psi
    Steering Cycle Times - High Idle - - - 3.1 s
    Steering Cycle Times - Low Idle - - - 5.7 s

    Axles
    Front - Fixed - Fixed
    Rear - Trunnion - Trunnion
    Oscillation Angle - 8.5 ° - ±13°

    Brakes
    Brakes - Meets ISO 3540:2011 - ISO 3450: 2011

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) - -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards - -
    FOPS - - ISO 3449:2005 Level II -
    ROPS - - ISO 3471:2008 -

    Dimensions (Approximate)
    Height - Top of ROPS - 17.2 ft - -
    Height - Top of Exhaust Pipe - 16.6 ft - -
    Height - Top of Hood - 12.7 ft - -
    Ground Clearance - 2 ft - -
    Centerline of Front Axle to Hitch - 7.5 ft - -
    Centerline of Rear Axle to Edge of Bumper - 12.5 ft - -
    Wheel Base - 15.1 ft - -
    Length - With Blade on Ground - 36.5 ft - -

    Hydraulic Controls
    Pump Output - - 17.2 gal/min -
    Relief Valve Settings - - 2988 psi -

    Ripper
    Type - - Parallelogram -
    Number of Shanks - - 3 -
    Height - - 6.5 in -
    Weight - - 1222 lb -
    Maximum Digging Depth - - 13.3 in -
    Maximum Ground Clearance Under Tip - - 17.6 in -
    Overall Width - - 67.3 in -
    Maximum Reach - Ground Line - - 30.2 in -

    Dimensions
    Length of Basic Dozer (without blade) - LGP - - 129.5 in -
    Width of Dozer (standard shoes, no blade) - Standard - - 79.1 in -
    Dozer Height - LGP - - 108.9 in -
    Dozer Height - Standard - - 108.9 in -
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in -
    Length of Basic Dozer (without blade) - Standard - - 129.5 in -
    BLADE: Digging Depth - LGP - - 23.2 in -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58° -
    BLADE: Blade Lift Height - LGP - - 27.9 in -
    BLADE: Blade Width - LGP - - 124 in -
    BLADE: Blade Width at Maximum Angle - LGP - - 113.1 in -
    Track Gauge - LGP - - 67.9 in -
    Ground Clearance - LGP - - 13 in -
    BLADE: Blade Height - LGP - - 35.8 in -
    Overall Length - With Blade - LGP - - 168.2 in -
    BLADE: Blade Capacity (SAE) - LGP - - 2.42 yd³ -
    BLADE: Maximum Tilt - LGP - - 17.2 in -
    BLADE: Maximum Angle (either side) - LGP - - 25° -
    BLADE: Maximum Angle (either side) - Standard - - 25° -
    Ground Clearance - Standard - - 13 in -
    Overall Length - With Blade - Standard - - 168.5 in -
    Note - - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58° -
    BLADE: Maximum Tilt - Standard - - 15.2 in -
    Track Gauge - Standard - - 61 in -
    BLADE: Digging Depth - Standard - - 23.3 in -
    BLADE: Blade Width - Standard - - 109.5 in -
    BLADE: Blade Lift Height - Standard - - 29.3 in -
    BLADE: Blade Capacity (SAE) - Standard - - 2.59 yd³ -
    BLADE: Blade Width at Maximum Angle - Standard - - 100.1 in -
    BLADE: Blade Height - Standard - - 39.8 in -
    Height - Top of Exhaust Stack - - - 15.9 ft
    Height - Top of Air Cleaner - - - 12.8 ft
    Height - Top of Hood - - - 10.9 ft
    Ground Clearance - Bumper - - - 3.1 ft
    Centerline of Rear Axle to Edge of Bumper - - - 10.5 ft
    Wheel Base - - - 14.9 ft
    Length - Front of Tire - - - 28.4 ft
    Length - Straight Blade on Ground - - - 32.6 ft
    Centerline of Front Axle to Hitch - - - 7.5 ft
    Length - Universal Blade on Ground - - - 34.4 ft
    Ground Clearance - - - 1.7 ft
    Height - Top of Cab - - - 13.7 ft

    Undercarriage
    Length - Track on Ground - LGP - - 89 in -
    Track Gauge - - 61 in -
    Number of Rollers - Each Side - - 7 -
    Track Gauge - LGP - - 68 in -
    Ground Pressure - LGP - - 4.3 psi -
    Shoe Width - Standard - - 18 in -
    Shoe Width - LGP - - 25 in -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 43 -
    Number of Shoes - Each Side - Abrasion Undercarriage - - 38 -
    Ground Pressure - - 5.7 psi -
    Length of Track on Ground - - 89 in -

    Retrieval Winch
    Maximum Line Speed - Full Drum - - 79 ft/min -
    Maximum Line Speed - Bare Drum - - 50 ft/min -
    Weight - - 1747 lb -
    Drum Capacity - Optional Cable - - 195 ft -
    Rope Diameter - Recommended - - 0.63 in -
    Winch Drive - - Hydraulic -
    Rope Diameter - Optional - - 0.75 in -
    Drum Capacity - Recommended Cable - - 277 ft -
    Maximum Line Pull - Full Drum - - 20350 lb -
    Speed - - Variable -
    Maximum Line Pull - Bare Drum - - 32150 lb -
    Control - - Hydraulic -
    Overall width - - 27.91 in -
    Drum Width - - 9.65 in -
    Drum Diameter - - 8 in -
    Winch Length - - 35.63 in -
    Throat Clearance - - 5.6 in -

    High Performance Winch
    Maximum line pull – bare drum - - 40000 lb -
    Drum capacity – recommended cable - - 371 ft -
    Winch length - - 27.76 in -
    Overall width - - 29.2 in -
    Control - - Hydraulic -
    Maximum line speed – bare drum - - 131 ft/min -
    Maximum line speed – full drum - - 207 ft/min -
    Drum width - - 10.8 in -
    Drum capacity – optional - - 256 ft -
    Throat clearance - - 6.75 in -
    Weight - - 1345 lb -
    Rope diameter – recommended - - 0.63 in -
    Speed - - Variable -
    Maximum line pull – full drum - - 25000 lb -
    Drum diameter - - 10 in -
    Rope diameter – optional - - 0.75 in -
    Winch drive - - Hydrostatic -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - - 113 dB(A)

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - - 109 dB(A)

    Scoops
    Chip Scoop Carry Capacity - - - 35 yd³
    Chip Scoop Doze Capacity - - - 70 yd³
    Coal Scoop Carry Capacity - - - 30 yd³
    Coal Scoop Doze Capacity - - - 60 yd³
    Add a Similar Product: