CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    844 Wheel Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B C27 Cat® -
    Power - Net 265 HP - -
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2 -
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - -
    Note (4) Machine Build Number 17A - -
    Rated Speed - 1800 r/min -
    Gross Power - ISO 14396 - 752 HP -
    Gross Power - SAE J1995 - 766 HP -
    Net Power - SAE J1349 - Standard Ambient - 699 HP -
    Net Power - SAE J1349 - High Ambient - 648 HP -
    Bore - 5.4 in -
    Stroke - 6 in -
    Displacement - 1649.5 in³ -
    Peak Torque - Speed - 2624 lb/ft -
    Torque Rise - 18 % -

    Weights
    Operating Weight 65644 lb - -
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. - -

    Transmission
    Power Train Fully Automatic 4-Speed - -
    Transmission Type - Cat Planetary Power Shift Cat Planetary Power Shift
    Converter Drive - Forward 1 - 4.5 mile/h -
    Converter Drive - Forward 2 - 8.3 mile/h -
    Converter Drive - Forward 3 - 14.2 mile/h -
    Converter Drive - Reverse 1 - 4.9 mile/h -
    Converter Drive - Reverse 2 - 9.1 mile/h -
    Converter Drive - Reverse 3 - 15.5 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 8.5 mile/h -
    Direct Drive - Forward 3 - 15.2 mile/h -
    Direct Drive - Reverse 1 - 5.4 mile/h -
    Direct Drive - Reverse 2 - 9.6 mile/h -
    Direct Drive - Reverse 3 - 16.4 mile/h -
    Forward - 1 - - 3.7 mile/h
    Forward - 2 - - 6.5 mile/h
    Forward - 3 - - 11.2 mile/h
    Forward - 4 - - 19.4 mile/h
    Reverse - 1 - - 4.2 mile/h
    Reverse - 2 - - 7.3 mile/h
    Reverse - 3 - - 12.8 mile/h
    Reverse - 4 - - 22.1 mile/h

    Service Refill Capacities
    Fuel Tank 123 gal (US) - 132.1 gal (US)
    DEF Tank 12 gal (US) - -
    Fuel Tank - Standard - 286.6 gal (US) -
    Cooling System - 54.9 gal (US) -
    Crankcase - 20 gal (US) -
    Transmission - 29.1 gal (US) 13.2 gal (US)
    Differential - Final Drives - Front - 71.6 gal (US) 17.2 gal (US)
    Differential - Final Drives - Rear - 68.9 gal (US) 17.2 gal (US)
    Hydraulic System - Implement and Hydraulic Fan - 68.9 gal (US) -
    Hydraulic System - Steering and Braking - 34.9 gal (US) -
    Diesel Exhaust Fluid Tank - - 4.2 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V - - 21.4 gal (US)
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - - 19.3 gal (US)
    Engine Crankcase - - 5.3 gal (US)
    Hydraulic System - Implement/Steering - - 34.1 gal (US)
    Hydraulic Tank Only - - 19.8 gal (US)

    Standard SU
    Operating Weight 65644 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 10 yd³ - -

    LGP S
    Operating Weight 63220 lb - -
    Ground Pressure 6 psi - -
    Width of Standard Shoe 36 in - -
    Blade Straight (S) - -
    Blade Capacity 8 yd³ - -

    Waste Handler
    Operating Weight 62035 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Universal Landfill (U) - -
    Blade Capacity 22 yd³ - -

    Sustainability
    Recyclability 98% - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - -

    Operating Specifications
    Operating Weight - 165089 lb -
    Blade Capacities - 15.9 - 30.7 m3 (20.7 - 40.2 yd3) -

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - 82 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - 133 mm × 1535 mm (5.25 in × 60.4 in) 120 mm × 915 mm (4.7 in × 36.0 in)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 210 mm × 188 mm (8.25 in × 7.4 in) -
    Relief Valve Setting - Bulldozer (Large Pump) - 2700 psi -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - 2920 psi -
    Lift/Tilt System - Circuit - - Pilot operated LS valve with EH
    Lift/Tilt System - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - 23.5 gal/min
    Relief Valve Setting - Lift/Tilt - - 3190 psi
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - 101.6 mm × 234 mm (4.0 in × 9.2 in)
    Pilot System - - Open center, fixed displacement gear
    Pilot Relief Valve Setting - - 3046 psi

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Variable displacement piston
    Minimum Turning Radius - Over Blade - 34 ft -
    Total Steering Angle - 35 ° 72°
    Maximum Flow - 94.3 gal/min -
    Relief Valve Setting - 4500 psi -
    Maximum Flow at 2,200 rpm - - 38.8 gal/min
    Relief Valve Setting - Steering - - 4003 psi
    Steering Cycle Times - High Idle - - 3 s
    Steering Cycle Times - Low Idle - - 8.2 s

    Axles
    Front - Fixed Planetary – Fixed
    Rear - Trunnion Planetary – Oscillating
    Oscillation Angle - 8.5 ° ±10°

    Brakes
    Brakes - Meets ISO 3540:2011 -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards -

    Dimensions (Approximate)
    Height - Top of ROPS - 17.2 ft -
    Height - Top of Exhaust Pipe - 16.6 ft 11.3 ft
    Height - Top of Hood - 12.7 ft 8.7 ft
    Ground Clearance - 2 ft -
    Centerline of Front Axle to Hitch - 7.5 ft 5.5 ft
    Centerline of Rear Axle to Edge of Bumper - 12.5 ft -
    Wheel Base - 15.1 ft 11 ft
    Length - With Blade on Ground - 36.5 ft -
    Height to Top of Beacon - - 13.1 ft
    Height - Top of Cab - - 12.1 ft
    Height to Top of Radiator Guard - - 8 ft
    Ground Clearance to Hitch - - 1.4 ft
    Ground Clearance to Transmission Guard - - 1.4 ft
    Ground Clearance to Bottom of Bumper - - 2.3 ft
    Centerline of Rear Axle to Bumper - - 6.5 ft
    Width over Platform - - 10.3 ft
    Overall Length to Front Tire - - 21 ft
    Overall Machine Length with Straight Blade - - 23.6 ft
    Overall Machine Length with Coal Blade - - 25.5 ft

    Engine - Tier 4 Final/EU Stage V
    Engine Model - - Cat C7.1
    Net Power (SAE J1349:2011) - - 249 HP
    Net Power (ISO 9249:2007) - - 249 HP
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V
    Rated Speed - - 2200 r/min
    Gross Power (SAE J1995:2014) - - 284 HP
    Engine Power (ISO 14396:2002) - - 275 HP
    Peak Torque - 1,400 rpm - - 902 lb/ft
    Torque Rise - - 52%
    Bore - - 4.1 in
    Stroke - - 5.3 in
    Displacement - - 427.8 in³
    High Idle Speed - - 2270 r/min
    Low Idle Speed - - 800 r/min
    Maximum Altitude without Derating - - 9842.5 ft
    Note - - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - - 48526 lb

    Scoops
    Chip Scoop Doze Capacity - - 37.9 yd³
    Chip Scoop Carry Capacity - - 19 yd³

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - - Cat C7.1
    Emissions - - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
    Rated Speed - - 2200 r/min
    Net Power (SAE J1349:2011) - - 249 HP
    Gross Power (SAE J1995:2014) - - 286 HP
    Engine Power (ISO 14396:2002) - - 275 HP
    Peak Torque - 1,400 rpm - - 749 lb/ft
    Torque Rise - - 26%
    Bore - - 4.1 in
    Stroke - - 5.3 in
    Displacement - - 427.8 in³
    High Idle Speed - - 2270 r/min

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - - 47887 lb

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - - 52280 lb

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - - 51639 lb

    Braking System
    Service Brakes - - Single Disc Wet (enclosed) 4 WHL
    Parking Brake - - Drum and Shoe, Spring Applied, Hydraulic Released

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 111 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A)

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 109 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 112 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).
    Add a Similar Product: