CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    834 Wheel Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove
    824K Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B Cat® C18 - Cat® C15
    Power - Net 265 HP - - -
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. - Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - - -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - - -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - - -
    Note (4) Machine Build Number 17A - - -
    Rated Speed - 1900 r/min - -
    Peak Power Speed - 1500 r/min - -
    Gross Power - SAE J1995 - 562 HP - -
    Net Power - SAE J1349 - 496 HP - -
    Bore - 5.7 in - 5.4 in
    Stroke - 7.2 in - 6.7 in
    Displacement - 1105 in³ - 927.6 in³
    Peak Torque - 1,300 rpm - 2092 lb/ft - -
    Torque Rise - 52 % - -
    Net Power - ISO 9249 - - - 405 HP
    Gross Power - - - 435 HP

    Weights
    Operating Weight 65644 lb - - -
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. - - -

    Transmission
    Power Train Fully Automatic 4-Speed - - -
    Transmission Type - Cat planetary power shift Cat Planetary Power Shift Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
    Forward - 1 - 4.2 mile/h 3.7 mile/h -
    Forward - 2 - 7.2 mile/h 6.5 mile/h -
    Forward - 3 - 12.6 mile/h 11.2 mile/h -
    Forward - 4 - 22 mile/h 19.4 mile/h -
    Reverse - 1 - 4.2 mile/h 4.2 mile/h -
    Reverse - 2 - 7.6 mile/h 7.3 mile/h -
    Reverse - 3 - 13.3 mile/h 12.8 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled - -
    Direct Drive - Forward 2 - 7.7 mile/h - -
    Direct Drive - Forward 3 - 13.7 mile/h - -
    Direct Drive - Forward 4 - 23.9 mile/h - -
    Direct Drive - Reverse 1 - 4.5 mile/h - -
    Direct Drive - Reverse 2 - 8.1 mile/h - -
    Direct Drive - Reverse 3 - 14.3 mile/h - -
    Reverse - 4 - - 22.1 mile/h -

    Service Refill Capacities
    Fuel Tank 123 gal (US) 209.5 gal (US) 132.1 gal (US) 206.6 gal (US)
    DEF Tank 12 gal (US) - - -
    Cooling System - 31.7 gal (US) - 30.6 gal (US)
    Crankcase - 15.9 gal (US) - -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) 4.2 gal (US) -
    Transmission - 31.7 gal (US) 13.2 gal (US) 17.4 gal (US)
    Hydraulic System Factory Fill - 63.4 gal (US) - -
    Differential - Final Drives - Front - 49.1 gal (US) 17.2 gal (US) 26.4 gal (US)
    Differential - Final Drives - Rear - 49.1 gal (US) 17.2 gal (US) 29.1 gal (US)
    Hydraulic System - Tank Only - 37 gal (US) - -
    Cooling Systems - Tier 4 Final/EU Stage V - - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - - 19.3 gal (US) -
    Engine Crankcase - - 5.3 gal (US) -
    Hydraulic System - Implement/Steering - - 34.1 gal (US) -
    Hydraulic Tank Only - - 19.8 gal (US) -

    Standard SU
    Operating Weight 65644 lb - - -
    Ground Pressure 10 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 10 yd³ - - -

    LGP S
    Operating Weight 63220 lb - - -
    Ground Pressure 6 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade Straight (S) - - -
    Blade Capacity 8 yd³ - - -

    Waste Handler
    Operating Weight 62035 lb - - -
    Ground Pressure 10 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Universal Landfill (U) - - -
    Blade Capacity 22 yd³ - - -

    Sustainability
    Recyclability 98% - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - - -

    Operating Specifications
    Operating Weight - 105271 lb - 74966 lb
    Blade Capacities - 7.9 – 22.2 m3 (10.3 – 29.0 yd3) - -
    Coal Scoop Operating Weight - 112428 lb - -
    Chip Scoop Operating Weight - 112838 lb - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston Variable displacement piston -
    Maximum Flow at 1,900 rpm - 153 gal/min - -
    Relief Valve Setting - Lift/Tilt - 4641 psi 3190 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 139.75 mm × 1021 mm (5.5 in × 40.2 in) 120 mm × 915 mm (4.7 in × 36.0 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 140 mm × 230 mm (5.5 in × 9.1 in) 101.6 mm × 234 mm (4.0 in × 9.2 in) -
    Pilot System - Variable displacement piston Open center, fixed displacement gear -
    Pilot Maximum Flow - 13.7 gal/min - -
    Pilot Relief Valve Setting - 580 psi 3046 psi -
    Maximum Flow at 2,200 rpm - - 23.5 gal/min -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing Double Acting – End Mounted
    Steering System - Pump - Piston, variable displacement Variable displacement piston Piston – Variable Displacement
    Maximum Flow - 65.8 gal/min - -
    Relief Valve Setting - Steering - 3495 psi 4003 psi -
    Total Steering Angle - 86 ° 72° -
    Steering Cycle Times - High Idle - 3.1 s 3 s -
    Steering Cycle Times - Low Idle - 5.7 s 8.2 s -
    Maximum Flow at 2,200 rpm - - 38.8 gal/min -

    Axles
    Front - Fixed Planetary – Fixed Planetary – Fixed
    Rear - Trunnion Planetary – Oscillating Planetary – Oscillating
    Oscillation Angle - ±13° ±10° ±11°

    Brakes
    Brakes - ISO 3450: 2011 - -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) 70 dB(A) -
    Machine Sound Level (ISO 6395) - 113 dB(A) 111 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) 70 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) 109 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Dimensions
    Height - Top of Exhaust Stack - 15.9 ft - -
    Height - Top of Air Cleaner - 12.8 ft - -
    Height - Top of Hood - 10.9 ft - -
    Ground Clearance - Bumper - 3.1 ft - -
    Centerline of Rear Axle to Edge of Bumper - 10.5 ft - -
    Wheel Base - 14.9 ft - -
    Length - Front of Tire - 28.4 ft - -
    Length - Straight Blade on Ground - 32.6 ft - -
    Centerline of Front Axle to Hitch - 7.5 ft - -
    Length - Universal Blade on Ground - 34.4 ft - -
    Ground Clearance - 1.7 ft - -
    Height - Top of Cab - 13.7 ft - -

    Scoops
    Chip Scoop Carry Capacity - 35 yd³ 19 yd³ -
    Chip Scoop Doze Capacity - 70 yd³ 37.9 yd³ -
    Coal Scoop Carry Capacity - 30 yd³ - -
    Coal Scoop Doze Capacity - 60 yd³ - -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - - Cat C7.1 -
    Net Power (SAE J1349:2011) - - 249 HP -
    Net Power (ISO 9249:2007) - - 249 HP -
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - - 2200 r/min -
    Gross Power (SAE J1995:2014) - - 284 HP -
    Engine Power (ISO 14396:2002) - - 275 HP -
    Peak Torque - 1,400 rpm - - 902 lb/ft -
    Torque Rise - - 52% -
    Bore - - 4.1 in -
    Stroke - - 5.3 in -
    Displacement - - 427.8 in³ -
    High Idle Speed - - 2270 r/min -
    Low Idle Speed - - 800 r/min -
    Maximum Altitude without Derating - - 9842.5 ft -
    Note - - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - - 48526 lb -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - - Cat C7.1 -
    Emissions - - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - - 2200 r/min -
    Net Power (SAE J1349:2011) - - 249 HP -
    Gross Power (SAE J1995:2014) - - 286 HP -
    Engine Power (ISO 14396:2002) - - 275 HP -
    Peak Torque - 1,400 rpm - - 749 lb/ft -
    Torque Rise - - 26% -
    Bore - - 4.1 in -
    Stroke - - 5.3 in -
    Displacement - - 427.8 in³ -
    High Idle Speed - - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - - 51639 lb -

    Braking System
    Service Brakes - - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - - Drum and Shoe, Spring Applied, Hydraulic Released -

    Dimensions (Approximate)
    Height to Top of Beacon - - 13.1 ft -
    Height - Top of Cab - - 12.1 ft 13.5 ft
    Height - Top of Exhaust Pipe - - 11.3 ft -
    Height - Top of Hood - - 8.7 ft 10.5 ft
    Height to Top of Radiator Guard - - 8 ft -
    Ground Clearance to Hitch - - 1.4 ft -
    Ground Clearance to Transmission Guard - - 1.4 ft -
    Ground Clearance to Bottom of Bumper - - 2.3 ft -
    Centerline of Rear Axle to Bumper - - 6.5 ft -
    Centerline of Front Axle to Hitch - - 5.5 ft 6.1 ft
    Wheel Base - - 11 ft 12.1 ft
    Width over Platform - - 10.3 ft -
    Overall Length to Front Tire - - 21 ft -
    Overall Machine Length with Straight Blade - - 23.6 ft -
    Overall Machine Length with Coal Blade - - 25.5 ft -
    Centerline of Rear Axle to Edge of Bumper - - - 9.3 ft
    Height - Top of Exhaust Stack - - - 14.2 ft
    Ground Clearance - - - 1.4 ft

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A) -
    Machine Sound Level (ISO 6395) - - 112 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A) -
    Machine Sound Level (ISO 6395) - - 110 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Hydraulic System
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - - 140 mm × 230 mm (5.5 in × 9.1 in)
    Cylinders, Double Acting - Lift, Bore and Stroke - - - 120 mm × 1070 mm (4.7 in × 42.1 in)
    Add a Similar Product: