Compare

Compare Equipment Go Back

Engine
	D7 Dozer View Product	D10 Dozer View Product Remove	D11 Dozer View Product Remove
Engine Model	Cat C9.3B	-	-
Power - Net	265 HP	-	-
Net Power - Rated - ISO 9249/SAE J1349	265 HP	-	-
Net Power (Rated) - ISO 9249 (DIN)	268 mhp	-	-
Emissions	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV	-	-
Note (1)	Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t	-	-
Note (2)	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (	-	-
Note (3)	Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.	-	-
Note (4)	Machine Build Number 17A	-	-
Weights
Operating Weight	65644 lb	154888 lb	229800 lb
Note (1)	Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar.	D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Shipping Weight	-	111739 lb	-
Note (2)	-	D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.	D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Operating Weight - Carrydozer	-	-	250665 lb
Transmission
Power Train	Fully Automatic 4-Speed	-	-
1.0 Forward	-	2.5 mile/h	2.5 mile/h
1.5 Forward	-	3.4 mile/h	-
2.0 Forward	-	4.5 mile/h	4.4 mile/h
2.5 Forward	-	6 mile/h	-
3.0 Forward	-	7.8 mile/h	7.6 mile/h
1.0 Reverse	-	3.2 mile/h	3 mile/h
1.5 Reverse	-	4.2 mile/h	-
2.0 Reverse	-	5.6 mile/h	5.3 mile/h
2.5 Reverse	-	7.5 mile/h	-
3.0 Reverse	-	9.8 mile/h	9.1 mile/h
Transmission Clutch Diameter	-	17 in	-
Type	-	Planetary powershift	-
Drawbar Pull - 3 Forward	-	-	46250 ft·lbf
Drawbar Pull - 1 Forward	-	-	148200 ft·lbf
Drawbar Pull - 2 Forward	-	-	82300 ft·lbf
Service Refill Capacities
Fuel Tank	123 gal (US)	-	-
DEF Tank	12 gal (US)	-	-
Cooling System	-	-	46.8 gal (US)
Cooling System Refill - Tier 2 Equivalent Engine	-	-	41.7 gal (US)
Engine Crankcase	-	-	35.1 gal (US)
Power Train	-	-	120 gal (US)
Power Train - Refill Volume	-	-	103.3 gal (US)
Final Drive - Each	-	-	12.4 gal (US)
Roller Frames - Each	-	-	24.8 gal (US)
Hydraulic Tank	-	-	42.2 gal (US)
Hydraulic System Tank and Chassis	-	-	64.7 gal (US)
Hydraulic System Chassis + Blade and Ripper (Standard)	-	-	117.6 gal (US)
Hydraulic System Chassis + Blade and Ripper (Carrydozer)	-	-	143.4 gal (US)
Standard SU
Operating Weight	65644 lb	-	-
Ground Pressure	10 psi	-	-
Width of Standard Shoe	24 in	-	-
Blade	Semi-Universal (SU)	-	-
Blade Capacity	10 yd³	-	-
LGP S
Operating Weight	63220 lb	-	-
Ground Pressure	6 psi	-	-
Width of Standard Shoe	36 in	-	-
Blade	Straight (S)	-	-
Blade Capacity	8 yd³	-	-
Waste Handler
Operating Weight	62035 lb	-	-
Ground Pressure	10 psi	-	-
Width of Standard Shoe	24 in	-	-
Blade	Universal Landfill (U)	-	-
Blade Capacity	22 yd³	-	-
Sustainability
Recyclability	98%	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.	-
Note (1)	-	-	The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)

Note (2)	Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.	-	-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model	-	Cat® C27	Cat® C32
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	602 HP	-
Engine Power - Gross SAE J1995* - Forward	-	631 HP	-
Engine Power - Gross SAE J1995* - Reverse	-	766 HP	-
Engine Power - ISO 14396* - Forward	-	620 HP	-
Engine Power - ISO 14396* - Reverse	-	754 HP	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	722 HP	-
Displacement	-	1648 in³	1959 in³
Stroke	-	6 in	-
Bore	-	5.4 in	-
Emissions	-	U.S. EPA Tier 4 Final/EU Stage V	-
Note (1)	-	*Excludes all fan losses.	*Excludes all fan losses.
Note (2)	-	All Engine ratings apply at 1,800 rpm.	Engine ratings apply at 1,800 rpm.
Note (3)	-	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note (4)	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-
Note (5)	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	-	850 HP
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	-	955 HP
Undercarriage
Shoe Type	-	Extreme Service (ES)	Extreme Service
Width - Shoe	-	24 in	28 in
Shoes/Side	-	44	41
Grouser Height	-	3.7 in	4 in
Pitch	-	10.2 in	12.5 in
Ground Clearance	-	28.5 in	-
Track Gauge	-	100.4 in	114 in
Length - Track on Ground	-	152.8 in	175 in
Ground Contact Area	-	7347 in²	9781 in²
Track Rollers/Side	-	8	8
Number of Carrier Rollers	-	1 per side (optional)	1 per side (optional)
Width - Shoe - CD	-	-	36 in
Ground Clearance*	-	-	30.6 in
Ground Contact Area - CD	-	-	12605 in²
Standards
ROPS	-	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS	-	Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
Sound	-	Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)	-
Note	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and	-
Sound (1)	-	Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)	The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
Note (1)	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.	-
Note (2)	-	The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.	-
Note (3)	-	The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).	-
Sound (2)	-	-	The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
Steering and Brakes
Steering Type	-	Hydraulically Applied Multiple-Disc Steering Clutch	-
Brake Type	-	Spring Applied Multiple- Disc Brake	-
Brake Diameter	-	15.4 in	-
Brake Count	-	10	-
Blades
10SU ABR - Capacity (SAE J1265)	-	24.2 yd³	-
10SU ABR - Width (over end bits)	-	194.5 in	-
10SU ABR - Height	-	83.5 in	-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	19.98 in	-
10SU ABR - Digging Depth - Blade Pitch: Nominal	-	25.23 in	-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	30.08 in³	-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	66.14 in	-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	53.86 in	-
10SU ABR - Ground Clearance - Maximum Tilt LH	-	56.3 in	-
10SU ABR - Ground Clearance - Maximum Tilt RH	-	56.3 in	-
10U ABR - Capacity (SAE J1265)	-	28.7 yd³	-
10U ABR - Width (over end bits)	-	207.1 in	-
10U ABR - Height	-	83.5 in	-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	19.98 in	-
10U ABR - Digging Depth - Blade Pitch: Nominal	-	60 in	-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	30.1 in	-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	66.1 in	-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	53.9 in	-
10U ABR - Ground Clearance - Maximum Tilt LH	-	60.8 in	-
10U ABR - Ground Clearance - Maximum Tilt RH	-	60.8 in	-
10U ABR - Weights - Blade Weight*	-	23585 lb	-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)	-	154888 lb	-
Note (1)	-	Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees	-
Note (2)	-	*Does not include hydraulic controls but includes blade cylinders, pusharms.	-
Note (3)	-	**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	-
Semi-Universal (SU)* Capacity	-	-	35.6 yd³
Semi-Universal (SU)* Width Over Endbits	-	-	219.8 in
U-Blade Capacity	-	-	45 yd³
U-Blade Width	-	-	249.6 in
Reclamation Universal - Blade capacity (SAE J1265)	-	-	55 yd³
Reclamation Universal - Width with blade (over end bits)	-	-	251.8 in
Carry Dozer - Blade capacity (SAE J1265)	-	-	57 yd³
Carry Dozer - Width with blade (over end bits)	-	-	263.9 in
Ripper - Single Shank
Maximum penetration force * (shank vertical)	-	49233 lbf	66000 lb
Maximum penetration depth (standard tip)	-	59.2 in	63.5 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	36 in	-
Weight	-	14209 lb	-
Note	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	-
Pryout Force	-	-	148510 lb
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	-	53055 lbf	66110 lb
Maximum penetration depth (standard tip)	-	78.3 in	85.5 in
Weight	-	14548 lb	-
Note	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	-
Pryout Force	-	-	148510 lb
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	-	Cat® C27	Cat® C32
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	603 HP	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	722 HP	-
Engine Power - Gross SAE J1995* - Forward	-	631 HP	-
Engine Power - Gross SAE J1995* - Reverse	-	766 HP	-
Engine Power - ISO 14396* - Forward	-	622 HP	-
Engine Power - ISO 14396* - Reverse	-	756 HP	-
Displacement	-	1648 in³	1959 in³
Bore	-	5.4 in	-
Stroke	-	6 in	-
Emissions	-	U.S. EPA Tier 2 Equivalent	-
Note (1)	-	*Excludes all fan losses.	*Excludes all fan losses.
Note (2)	-	All Engine ratings apply at 1,800 rpm.	Engine ratings apply at 1,800 rpm.
Note (3)	-	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note (4)	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-
Note (5)	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	-	850 HP
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	-	957 HP
Fuel Tank Capacities
Fuel Tank - Usable Volume	-	323.3 gal (US)	475 gal (US)
Fuel Tank - Total Volume	-	335.2 gal (US)	500 gal (US)
Hydraulic Controls
Pump Type	-	Variable displacement piston	Variable displacement piston pump
Pump Output - Implement	-	112 gal/min	-
Note (1)	-	Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).	-
Fan Pump	-	21.7 gal/min	-
Note (2)	-	Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).	-
Tilt Cylinder Flow - Rod End Flow	-	112 gal/min	-
Tilt Cylinder Flow - Head End Flow	-	63.4 gal/min	-
Lift Cylinder Relief Valve Setting	-	4061.1 psi	-
Tilt Cylinder Relief Valve Setting	-	3872.5 psi	-
Ripper - Lift - Relief Valve Setting	-	4061.1 psi	-
Ripper - Pitch - Relief Valve Setting	-	4061.1 psi	-
Tank Capacity	-	32.2 gal (US)	-
Cylinder Sizing - Blade Lift - Bore	-	5.5 in	-
Cylinder Sizing - Blade Tilt - Bore	-	8.3 in	-
Cylinder Sizing - Ripper Shank Lift - Bore	-	8.3 in	-
Cylinder Sizing - Ripper Shank Angle - Bore	-	7.1 in	-
Cylinder Sizing - Blade Lift - Stroke	-	65.1 in	-
Cylinder Sizing - Blade Tilt - Stroke	-	9.5 in	-
Cylinder Sizing - Ripper Shank Lift - Stroke	-	21.1 in	-
Cylinder Sizing - Ripper Shank Angle - Stroke	-	26 in	-
Note (3)	-	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.	-
Combined Pump Output - Implement	-	-	177 gal/min
Dimensions (Approximate)
Ground Clearance*	-	28.5 in	-
Track Gauge	-	100.4 in	-
Width - Without Trunnions - 610 mm/24 in ES	-	130.4 in	-
Width - Over Trunnions	-	148 in	-
Height - FOPS Cab*	-	162.8 in	-
Height - Top of Stack*	-	171.5 in	-
Height - ROPS/Canopy*	-	173.5 in	-
Note (1)	-	*Includes grouser height for total dimensions on hard surfaces.	-
Length - Track on Ground	-	152.8 in	-
Overall Length - Basic Tractor	-	209.6 in	-
Length - With SU-Blade	-	292 in	-
Length - With U-Blade	-	305.1 in	-
Length - With Single-Shank Ripper	-	278.8 in	-
Length - With Multi-Shank Ripper	-	285.1 in	-
Overall Length - SU-Blade/SS Ripper	-	360.6 in	-
FLUID CAPACITIES
Cooling System Refill – Tier 4 Final Engine	-	46.2 gal (US)	-
Engine Crankcase Sump	-	27.2 gal (US)	-
Power Train - Total Volume	-	81.4 gal (US)	-
Power Train - Refill Volume	-	74.8 gal (US)	-
Final Drives (each)	-	12.2 gal (US)	-
Track Roller Frames (each)	-	16.9 gal (US)	-
Pivot Shaft Oil	-	9.5 gal (US)	-
Hydraulic System Tank	-	32.2 gal (US)	-
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width	-	-	131.1 in
Maximum Penetration Force - Shank Vertical	-	-	77350 lb
Maximum Penetration - Standard Tip	-	-	43.3 in
Pry-Out Force - Multi-Shank Ripper with One Tooth	-	-	145640 lb
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)	-	-	149.8 in
Length with SU-Blade** - No rear attachment	-	-	345.1 in
Overall Length SU-Blade and SS Ripper**	-	-	421.7 in
Dimensions - D11
Ground Clearance*	-	-	31.4 in
Track Gauge	-	-	114 in
Width at Outside of Track (710 mm Track Shoe)	-	-	142 in
Height (ROPS/canopy)*	-	-	185.9 in
Length of Track on Ground	-	-	175 in
Length with SU-Blade** - No rear attachment	-	-	337.8 in
Overall Length SU-Blade and SS Ripper**	-	-	414.4 in
Note	-	-	*Includes grouser height for total dimensions on hard surfaces.

Compare Equipment Go Back

D7 Dozer

D10 Dozer

D11 Dozer

Engine

Weights

Transmission

Service Refill Capacities

Standard SU

LGP S

Waste Handler

Sustainability

Air Conditioning System

Engine - U.S. EPA Tier 4 Final/EU Stage V

Undercarriage

Standards

Steering and Brakes

Blades

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Hydraulic Controls

Dimensions (Approximate)

FLUID CAPACITIES

Ripper - Multi-Shank, Adjustable Parallelogram

Dimensions - D11 Carrydozer

Dimensions - D11

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us