CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    D10 Dozer
    View Product Remove
    D9 Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B - -
    Power - Net 265 HP - -
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV - -
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - -
    Note (4) Machine Build Number 17A - -

    Weights
    Operating Weight 65644 lb 154888 lb 110225 lb
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
    Shipping Weight - 111739 lb 84373 lb
    Note (2) - D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.

    Transmission
    Power Train Fully Automatic 4-Speed - -
    1.0 Forward - 2.5 mile/h 2.2 mile/h
    1.5 Forward - 3.4 mile/h -
    2.0 Forward - 4.5 mile/h 3.9 mile/h
    2.5 Forward - 6 mile/h -
    3.0 Forward - 7.8 mile/h 6.8 mile/h
    1.0 Reverse - 3.2 mile/h 2.7 mile/h
    1.5 Reverse - 4.2 mile/h -
    2.0 Reverse - 5.6 mile/h 4.8 mile/h
    2.5 Reverse - 7.5 mile/h -
    3.0 Reverse - 9.8 mile/h 8.4 mile/h
    Transmission Clutch Diameter - 17 in -
    Type - Planetary powershift Planetary powershift

    Service Refill Capacities
    Fuel Tank 123 gal (US) - -
    DEF Tank 12 gal (US) - -

    Standard SU
    Operating Weight 65644 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 10 yd³ - -

    LGP S
    Operating Weight 63220 lb - -
    Ground Pressure 6 psi - -
    Width of Standard Shoe 36 in - -
    Blade Straight (S) - -
    Blade Capacity 8 yd³ - -

    Waste Handler
    Operating Weight 62035 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Universal Landfill (U) - -
    Blade Capacity 22 yd³ - -

    Sustainability
    Recyclability 98% - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C27 Cat® C18
    Engine Power - Net SAE J1349/ISO 9249** - Forward - 602 HP -
    Engine Power - Gross SAE J1995* - Forward - 631 HP -
    Engine Power - Gross SAE J1995* - Reverse - 766 HP -
    Engine Power - ISO 14396* - Forward - 620 HP -
    Engine Power - ISO 14396* - Reverse - 754 HP -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - 722 HP -
    Displacement - 1648 in³ 1106 in³
    Stroke - 6 in 7.2 in³
    Bore - 5.4 in 5.7 in³
    Emissions - U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 / EU Stage V
    Note (1) - *Excludes all fan losses. All Engine ratings apply at 1,750 rpm.
    Note (2) - All Engine ratings apply at 1,800 rpm. No derating required up to 2499 m (8,200 ft).
    Note (3) - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). -
    Note (4) - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -
    Engine Power - Gross SAE J1995 - - 477 HP
    Engine Power - ISO 14396 - - 468 HP
    Engine Power - Net SAE J1349/ISO 9249 - - 440 HP

    Undercarriage
    Shoe Type - Extreme Service (ES) Extreme Service
    Width - Shoe - 24 in 24 in
    Shoes/Side - 44 43
    Grouser Height - 3.7 in 3.3 in
    Pitch - 10.2 in 9.4 in
    Ground Clearance - 28.5 in 18.1 in
    Track Gauge - 100.4 in 88.6 in
    Length - Track on Ground - 152.8 in 136.6 in
    Ground Contact Area - 7347 in² 45.6 ft²
    Track Rollers/Side - 8 8
    Number of Carrier Rollers - 1 per side (optional) 1 per side (optional)

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
    FOPS - Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
    Sound - Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
    Note - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and -
    Sound (1) - Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
    Note (1) - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. -
    Note (2) - The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. -
    Note (3) - The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). -
    Sound (2) - - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.

    Steering and Brakes
    Steering Type - Hydraulically Applied Multiple-Disc Steering Clutch Differential
    Brake Type - Spring Applied Multiple- Disc Brake Spring Applied Wet Disc
    Brake Diameter - 15.4 in 15.5 in
    Brake Count - 10 8

    Blades
    10SU ABR - Capacity (SAE J1265) - 24.2 yd³ -
    10SU ABR - Width (over end bits) - 194.5 in -
    10SU ABR - Height - 83.5 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - 19.98 in -
    10SU ABR - Digging Depth - Blade Pitch: Nominal - 25.23 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - 30.08 in³ -
    10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - 66.14 in -
    10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - 53.86 in -
    10SU ABR - Ground Clearance - Maximum Tilt LH - 56.3 in -
    10SU ABR - Ground Clearance - Maximum Tilt RH - 56.3 in -
    10U ABR - Capacity (SAE J1265) - 28.7 yd³ -
    10U ABR - Width (over end bits) - 207.1 in -
    10U ABR - Height - 83.5 in -
    10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - 19.98 in -
    10U ABR - Digging Depth - Blade Pitch: Nominal - 60 in -
    10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - 30.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - 66.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - 53.9 in -
    10U ABR - Ground Clearance - Maximum Tilt LH - 60.8 in -
    10U ABR - Ground Clearance - Maximum Tilt RH - 60.8 in -
    10U ABR - Weights - Blade Weight* - 23585 lb -
    10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) - 154888 lb -
    Note (1) - Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees -
    Note (2) - *Does not include hydraulic controls but includes blade cylinders, pusharms. -
    Note (3) - **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 49233 lbf 35520 lbf
    Maximum penetration depth (standard tip) - 59.2 in 48.5 in
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 36 in 34.7 in
    Weight - 14209 lb 10701 lb
    Note - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
    Pryout Force - - 74637 lbf
    Number of Pockets - - 1
    Total Operating Weight* (with SU Blade and noted ripper) - - 110205 lb

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 53055 lbf 38667 lbf
    Maximum penetration depth (standard tip) - 78.3 in 68 in
    Weight - 14548 lb 10981 lb
    Note - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
    Pryout Force - - 74412 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 32.2 in
    Number of Pockets - - 1
    Total Operating Weight* (with SU Blade and noted ripper) - - 110485 lb

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C27 -
    Engine Power - Net SAE J1349/ISO 9249** - Forward - 603 HP -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - 722 HP -
    Engine Power - Gross SAE J1995* - Forward - 631 HP -
    Engine Power - Gross SAE J1995* - Reverse - 766 HP -
    Engine Power - ISO 14396* - Forward - 622 HP -
    Engine Power - ISO 14396* - Reverse - 756 HP -
    Displacement - 1648 in³ -
    Bore - 5.4 in -
    Stroke - 6 in -
    Emissions - U.S. EPA Tier 2 Equivalent -
    Note (1) - *Excludes all fan losses. -
    Note (2) - All Engine ratings apply at 1,800 rpm. -
    Note (3) - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). -
    Note (4) - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -

    Fuel Tank Capacities
    Fuel Tank - Usable Volume - 323.3 gal (US) -
    Fuel Tank - Total Volume - 335.2 gal (US) -

    Hydraulic Controls
    Pump Type - Variable displacement piston Piston-type geared to flywheel
    Pump Output - Implement - 112 gal/min -
    Note (1) - Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
    Fan Pump - 21.7 gal/min 21 gal/min
    Note (2) - Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
    Tilt Cylinder Flow - Rod End Flow - 112 gal/min 53 gal/min
    Tilt Cylinder Flow - Head End Flow - 63.4 gal/min 53 gal/min
    Lift Cylinder Relief Valve Setting - 4061.1 psi 3800 lbf/in
    Tilt Cylinder Relief Valve Setting - 3872.5 psi 2799 psi
    Ripper - Lift - Relief Valve Setting - 4061.1 psi 3800 psi
    Ripper - Pitch - Relief Valve Setting - 4061.1 psi 3800 psi
    Tank Capacity - 32.2 gal (US) 24 gal/min
    Cylinder Sizing - Blade Lift - Bore - 5.5 in -
    Cylinder Sizing - Blade Tilt - Bore - 8.3 in -
    Cylinder Sizing - Ripper Shank Lift - Bore - 8.3 in -
    Cylinder Sizing - Ripper Shank Angle - Bore - 7.1 in -
    Cylinder Sizing - Blade Lift - Stroke - 65.1 in -
    Cylinder Sizing - Blade Tilt - Stroke - 9.5 in -
    Cylinder Sizing - Ripper Shank Lift - Stroke - 21.1 in -
    Cylinder Sizing - Ripper Shank Angle - Stroke - 26 in -
    Note (3) - Electro-hydraulic pilot valves assist operations of ripper and dozer controls. Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
    Pump Output - Steering - - 96 gal/min
    Steering System - Pressure - - 5874 psi

    Dimensions (Approximate)
    Ground Clearance* - 28.5 in 18.1 in
    Track Gauge - 100.4 in 88.6 in
    Width - Without Trunnions - 610 mm/24 in ES - 130.4 in -
    Width - Over Trunnions - 148 in 130.3 in
    Height - FOPS Cab* - 162.8 in 150.4 in
    Height - Top of Stack* - 171.5 in 152.6 in
    Height - ROPS/Canopy* - 173.5 in 157.5 in
    Note (1) - *Includes grouser height for total dimensions on hard surfaces. *Includes grouser height for total dimensions on hard surfaces.
    Length - Track on Ground - 152.8 in 136.6 in
    Overall Length - Basic Tractor - 209.6 in 193.3 in
    Length - With SU-Blade - 292 in -
    Length - With U-Blade - 305.1 in 274.3 in
    Length - With Single-Shank Ripper - 278.8 in 257 in
    Length - With Multi-Shank Ripper - 285.1 in 257.4 in
    Overall Length - SU-Blade/SS Ripper - 360.6 in 323.6 in
    Width - Without Trunnions - Standard Shoe - - 113 in
    Drawbar Height (Center of Clevis)* - - 30 in
    Length - Basic Tractor - With Drawbar - - 206.4 in
    Length - Basic Tractor - With Winch - - 218.3 in
    Length - With SU-Blade** - - 259.9 in

    FLUID CAPACITIES
    Cooling System Refill – Tier 4 Final Engine - 46.2 gal (US) -
    Engine Crankcase Sump - 27.2 gal (US) -
    Power Train - Total Volume - 81.4 gal (US) -
    Power Train - Refill Volume - 74.8 gal (US) -
    Final Drives (each) - 12.2 gal (US) 4 gal (US)
    Track Roller Frames (each) - 16.9 gal (US) -
    Pivot Shaft Oil - 9.5 gal (US) 8 gal (US)
    Hydraulic System Tank - 32.2 gal (US) 24 gal (US)
    Fuel Tank (Splash Fill) - - 254 gal (US)
    DEF Tank (Tier 4 only) - - 9.5 gal (US)
    Fuel Tank (Fast Fill) - - 248 gal (US)
    Cooling System - - 21 gal (US)
    Engine Crankcase* - - 10 gal (US)
    Powertrain - - 40 gal (US)
    Roller Frames (each) - - 12 gal (US)
    Note - - *With oil filters.
    Note 2 - - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
    Note 3 - - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
    Note 4 - - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - - Cat® C18
    Engine Power - Net SAE J1349/ISO 9249 - - 452 HP
    Bore - - 5.7 in³
    Stroke - - 7.2 in
    Displacement - - 1106 in³
    Engine Power - Gross SAE J1995 - - 487 HP
    Engine Power - ISO 14396 - - 479 HP
    Emissions - - U.S. EPA Tier 2 or Tier 3 equivalent
    Note (1) - - All engine ratings apply at 1,750 rpm.
    Note (2) - - No derating required up to 4267 m (14,000 ft) altitude.

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - - 17.8 yd³
    Blade Width (over end bits) - - 171.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 37 in
    Blade Weight - - 10587 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 110205 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Blade - Universal
    Blade Capacity (SAE J1265) - - 21.7 yd³
    Blade Width (over end bits) - - 184.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 39.9 in
    Blade Weight - - 12016 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 111362 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - - 34621 lbf
    Maximum Penetration - Standard Tip - - 31.4 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - 81156 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.6 in
    Number of Pockets - - 3
    Weight - - 12136 lb
    Total Operating Weight* - With SU-Blade and Ripper - - 111739 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Winches
    Winch Model - - PA 140VS
    Weight* - - 3950 lb
    Oil Capacity - - 4 gal (US)
    Drum Width - - 12.6 in
    Wire Cable Diameter - Recommended - - 1.13 in
    Wire Cable Diameter - Optional - - 1.25 ft
    Maximum Drum Capacity - Recommended Cable Length - - 257 in
    Maximum Drum Capacity - Optional Cable Length - - 204 ft
    Wire Cable Ferrule Size - Outside Diameter - - 2.4 in
    Wire Cable Ferrule Size - Length - - 2.8 in
    Note - - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
    Note (2) - - Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
    Add a Similar Product: