CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    814 Wheel Dozer
    View Product Remove
    D2 Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B - Cat® C3.6
    Power - Net 265 HP - 92 HP
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV - -
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - -
    Note (4) Machine Build Number 17A - -
    Displacement - - 220 in³
    Net Power - 2,200 rpm - SAE J1349 - - 92 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 92 HP
    Power Train - - Hydrostatic

    Weights
    Operating Weight 65644 lb - 18382 lb
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Operating Weight - LGP - - 19066 lb
    Note (2) - - For machine with ripper, add 554 kg (1,222 lb).

    Transmission
    Power Train Fully Automatic 4-Speed - -
    Transmission Type - Cat Planetary Power Shift -
    Forward - 1 - 3.7 mile/h -
    Forward - 2 - 6.5 mile/h -
    Forward - 3 - 11.2 mile/h -
    Forward - 4 - 19.4 mile/h -
    Reverse - 1 - 4.2 mile/h -
    Reverse - 2 - 7.3 mile/h -
    Reverse - 3 - 12.8 mile/h -
    Reverse - 4 - 22.1 mile/h -
    Drive Pumps - - 1
    Maximum Travel Speed - Forward - - 5.6 mile/h
    Relief Valve Settings - - 7033 psi
    Maximum Travel Speed - Reverse - - 6.2 mile/h
    Track Motors - - 2

    Service Refill Capacities
    Fuel Tank 123 gal (US) 132.1 gal (US) 51.5 gal (US)
    DEF Tank 12 gal (US) - -
    Diesel Exhaust Fluid Tank - 4.2 gal (US) -
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - 19.3 gal (US) -
    Engine Crankcase - 5.3 gal (US) -
    Transmission - 13.2 gal (US) -
    Differential - Final Drives - Front - 17.2 gal (US) -
    Differential - Final Drives - Rear - 17.2 gal (US) -
    Hydraulic System - Implement/Steering - 34.1 gal (US) -
    Hydraulic Tank Only - 19.8 gal (US) -
    Crankcase - With Filter - - 2.8 gal (US)
    Final Drive - Each - LGP - - 2.6 gal (US)
    Cooling System - - 5 gal (US)
    Transmission - Hydraulic Tank - - 23.8 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US)
    Final Drives - Each Side - - 2.6 gal (US)

    Standard SU
    Operating Weight 65644 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 10 yd³ - -

    LGP S
    Operating Weight 63220 lb - -
    Ground Pressure 6 psi - -
    Width of Standard Shoe 36 in - -
    Blade Straight (S) - -
    Blade Capacity 8 yd³ - -

    Waste Handler
    Operating Weight 62035 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Universal Landfill (U) - -
    Blade Capacity 22 yd³ - -

    Sustainability
    Recyclability 98% - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - Cat C7.1 -
    Net Power (SAE J1349:2011) - 249 HP -
    Net Power (ISO 9249:2007) - 249 HP -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - 2200 r/min -
    Gross Power (SAE J1995:2014) - 284 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 902 lb/ft -
    Torque Rise - 52% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -
    Low Idle Speed - 800 r/min -
    Maximum Altitude without Derating - 9842.5 ft -
    Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - 48526 lb -

    Scoops
    Chip Scoop Doze Capacity - 37.9 yd³ -
    Chip Scoop Carry Capacity - 19 yd³ -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - Cat C7.1 -
    Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - 2200 r/min -
    Net Power (SAE J1349:2011) - 249 HP -
    Gross Power (SAE J1995:2014) - 286 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 749 lb/ft -
    Torque Rise - 26% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - 51639 lb -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 2,200 rpm - 23.5 gal/min -
    Relief Valve Setting - Lift/Tilt - 3190 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 915 mm (4.7 in × 36.0 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 101.6 mm × 234 mm (4.0 in × 9.2 in) -
    Pilot System - Open center, fixed displacement gear -
    Pilot Relief Valve Setting - 3046 psi -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Variable displacement piston -
    Maximum Flow at 2,200 rpm - 38.8 gal/min -
    Relief Valve Setting - Steering - 4003 psi -
    Total Steering Angle - 72° -
    Steering Cycle Times - High Idle - 3 s -
    Steering Cycle Times - Low Idle - 8.2 s -

    Axles
    Front - Planetary – Fixed -
    Rear - Planetary – Oscillating -
    Oscillation Angle - ±10° -

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released -

    Dimensions (Approximate)
    Height to Top of Beacon - 13.1 ft -
    Height - Top of Cab - 12.1 ft -
    Height - Top of Exhaust Pipe - 11.3 ft -
    Height - Top of Hood - 8.7 ft -
    Height to Top of Radiator Guard - 8 ft -
    Ground Clearance to Hitch - 1.4 ft -
    Ground Clearance to Transmission Guard - 1.4 ft -
    Ground Clearance to Bottom of Bumper - 2.3 ft -
    Centerline of Rear Axle to Bumper - 6.5 ft -
    Centerline of Front Axle to Hitch - 5.5 ft -
    Wheel Base - 11 ft -
    Width over Platform - 10.3 ft -
    Overall Length to Front Tire - 21 ft -
    Overall Machine Length with Straight Blade - 23.6 ft -
    Overall Machine Length with Coal Blade - 25.5 ft -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 111 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Hydraulic Controls
    Pump Output - - 17.2 gal/min
    Relief Valve Settings - - 2988 psi

    Ripper
    Type - - Parallelogram
    Number of Shanks - - 3
    Height - - 6.5 in
    Weight - - 1222 lb
    Maximum Digging Depth - - 13.3 in
    Maximum Ground Clearance Under Tip - - 17.6 in
    Overall Width - - 67.3 in
    Maximum Reach - Ground Line - - 30.2 in

    Dimensions
    Length of Basic Dozer (without blade) - LGP - - 129.5 in
    Width of Dozer (standard shoes, no blade) - Standard - - 79.1 in
    Dozer Height - LGP - - 108.9 in
    Dozer Height - Standard - - 108.9 in
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in
    Length of Basic Dozer (without blade) - Standard - - 129.5 in
    BLADE: Digging Depth - LGP - - 23.2 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58°
    BLADE: Blade Lift Height - LGP - - 27.9 in
    BLADE: Blade Width - LGP - - 124 in
    BLADE: Blade Width at Maximum Angle - LGP - - 113.1 in
    Track Gauge - LGP - - 67.9 in
    Ground Clearance - LGP - - 13 in
    BLADE: Blade Height - LGP - - 35.8 in
    Overall Length - With Blade - LGP - - 168.2 in
    BLADE: Blade Capacity (SAE) - LGP - - 2.42 yd³
    BLADE: Maximum Tilt - LGP - - 17.2 in
    BLADE: Maximum Angle (either side) - LGP - - 25°
    BLADE: Maximum Angle (either side) - Standard - - 25°
    Ground Clearance - Standard - - 13 in
    Overall Length - With Blade - Standard - - 168.5 in
    Note - - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58°
    BLADE: Maximum Tilt - Standard - - 15.2 in
    Track Gauge - Standard - - 61 in
    BLADE: Digging Depth - Standard - - 23.3 in
    BLADE: Blade Width - Standard - - 109.5 in
    BLADE: Blade Lift Height - Standard - - 29.3 in
    BLADE: Blade Capacity (SAE) - Standard - - 2.59 yd³
    BLADE: Blade Width at Maximum Angle - Standard - - 100.1 in
    BLADE: Blade Height - Standard - - 39.8 in

    Cab
    FOPS - - ISO 3449:2005 Level II
    ROPS - - ISO 3471:2008

    Undercarriage
    Length - Track on Ground - LGP - - 89 in
    Track Gauge - - 61 in
    Number of Rollers - Each Side - - 7
    Track Gauge - LGP - - 68 in
    Ground Pressure - LGP - - 4.3 psi
    Shoe Width - Standard - - 18 in
    Shoe Width - LGP - - 25 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 43
    Number of Shoes - Each Side - Abrasion Undercarriage - - 38
    Ground Pressure - - 5.7 psi
    Length of Track on Ground - - 89 in

    Retrieval Winch
    Maximum Line Speed - Full Drum - - 79 ft/min
    Maximum Line Speed - Bare Drum - - 50 ft/min
    Weight - - 1747 lb
    Drum Capacity - Optional Cable - - 195 ft
    Rope Diameter - Recommended - - 0.63 in
    Winch Drive - - Hydraulic
    Rope Diameter - Optional - - 0.75 in
    Drum Capacity - Recommended Cable - - 277 ft
    Maximum Line Pull - Full Drum - - 20350 lb
    Speed - - Variable
    Maximum Line Pull - Bare Drum - - 32150 lb
    Control - - Hydraulic
    Overall width - - 27.91 in
    Drum Width - - 9.65 in
    Drum Diameter - - 8 in
    Winch Length - - 35.63 in
    Throat Clearance - - 5.6 in

    High Performance Winch
    Maximum line pull – bare drum - - 40000 lb
    Drum capacity – recommended cable - - 371 ft
    Winch length - - 27.76 in
    Overall width - - 29.2 in
    Control - - Hydraulic
    Maximum line speed – bare drum - - 131 ft/min
    Maximum line speed – full drum - - 207 ft/min
    Drum width - - 10.8 in
    Drum capacity – optional - - 256 ft
    Throat clearance - - 6.75 in
    Weight - - 1345 lb
    Rope diameter – recommended - - 0.63 in
    Speed - - Variable
    Maximum line pull – full drum - - 25000 lb
    Drum diameter - - 10 in
    Rope diameter – optional - - 0.75 in
    Winch drive - - Hydrostatic
    Add a Similar Product: