CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    D11 Dozer
    View Product Remove
    D2 Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B - Cat® C3.6
    Power - Net 265 HP - 92 HP
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV - -
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - -
    Note (4) Machine Build Number 17A - -
    Displacement - - 220 in³
    Net Power - 2,200 rpm - SAE J1349 - - 92 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 92 HP
    Power Train - - Hydrostatic

    Weights
    Operating Weight 65644 lb 229800 lb 18382 lb
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Operating Weight - Carrydozer - 250665 lb -
    Note (2) - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - 19066 lb

    Transmission
    Power Train Fully Automatic 4-Speed - -
    1.0 Forward - 2.5 mile/h -
    2.0 Forward - 4.4 mile/h -
    3.0 Forward - 7.6 mile/h -
    1.0 Reverse - 3 mile/h -
    2.0 Reverse - 5.3 mile/h -
    3.0 Reverse - 9.1 mile/h -
    Drawbar Pull - 3 Forward - 46250 ft·lbf -
    Drawbar Pull - 1 Forward - 148200 ft·lbf -
    Drawbar Pull - 2 Forward - 82300 ft·lbf -
    Drive Pumps - - 1
    Maximum Travel Speed - Forward - - 5.6 mile/h
    Relief Valve Settings - - 7033 psi
    Maximum Travel Speed - Reverse - - 6.2 mile/h
    Track Motors - - 2

    Service Refill Capacities
    Fuel Tank 123 gal (US) - 51.5 gal (US)
    DEF Tank 12 gal (US) - -
    Cooling System - 46.8 gal (US) 5 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) -
    Engine Crankcase - 35.1 gal (US) -
    Power Train - 120 gal (US) -
    Power Train - Refill Volume - 103.3 gal (US) -
    Final Drive - Each - 12.4 gal (US) -
    Roller Frames - Each - 24.8 gal (US) -
    Hydraulic Tank - 42.2 gal (US) -
    Hydraulic System Tank and Chassis - 64.7 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) -
    Crankcase - With Filter - - 2.8 gal (US)
    Final Drive - Each - LGP - - 2.6 gal (US)
    Transmission - Hydraulic Tank - - 23.8 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US)
    Final Drives - Each Side - - 2.6 gal (US)

    Standard SU
    Operating Weight 65644 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 10 yd³ - -

    LGP S
    Operating Weight 63220 lb - -
    Ground Pressure 6 psi - -
    Width of Standard Shoe 36 in - -
    Blade Straight (S) - -
    Blade Capacity 8 yd³ - -

    Waste Handler
    Operating Weight 62035 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Universal Landfill (U) - -
    Blade Capacity 22 yd³ - -

    Sustainability
    Recyclability 98% - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) -

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in -
    U-Blade Capacity - 45 yd³ -
    U-Blade Width - 249.6 in -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ -
    Carry Dozer - Width with blade (over end bits) - 263.9 in -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) -
    Fuel Tank - Usable Volume - 475 gal (US) -

    Hydraulic Controls
    Pump Type - Variable displacement piston pump -
    Combined Pump Output - Implement - 177 gal/min -
    Pump Output - - 17.2 gal/min
    Relief Valve Settings - - 2988 psi

    Undercarriage
    Shoe Type - Extreme Service -
    Width - Shoe - 28 in -
    Width - Shoe - CD - 36 in -
    Shoes/Side - 41 -
    Grouser Height - 4 in -
    Pitch - 12.5 in -
    Ground Clearance* - 30.6 in -
    Track Gauge - 114 in 61 in
    Length - Track on Ground - 175 in -
    Ground Contact Area - 9781 in² -
    Ground Contact Area - CD - 12605 in² -
    Track Rollers/Side - 8 -
    Number of Carrier Rollers - 1 per side (optional) -
    Length - Track on Ground - LGP - - 89 in
    Number of Rollers - Each Side - - 7
    Track Gauge - LGP - - 68 in
    Ground Pressure - LGP - - 4.3 psi
    Shoe Width - Standard - - 18 in
    Shoe Width - LGP - - 25 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 43
    Number of Shoes - Each Side - Abrasion Undercarriage - - 38
    Ground Pressure - - 5.7 psi
    Length of Track on Ground - - 89 in

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb -
    Maximum penetration depth (standard tip) - 63.5 in -
    Pryout Force - 148510 lb -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb -
    Maximum penetration depth (standard tip) - 85.5 in -
    Pryout Force - 148510 lb -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in -
    Maximum Penetration Force - Shank Vertical - 77350 lb -
    Maximum Penetration - Standard Tip - 43.3 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in -
    Length with SU-Blade** - No rear attachment - 345.1 in -
    Overall Length SU-Blade and SS Ripper** - 421.7 in -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). -

    Dimensions - D11
    Ground Clearance* - 31.4 in -
    Track Gauge - 114 in -
    Width at Outside of Track (710 mm Track Shoe) - 142 in -
    Height (ROPS/canopy)* - 185.9 in -
    Length of Track on Ground - 175 in -
    Length with SU-Blade** - No rear attachment - 337.8 in -
    Overall Length SU-Blade and SS Ripper** - 414.4 in -
    Note - *Includes grouser height for total dimensions on hard surfaces. -

    Ripper
    Type - - Parallelogram
    Number of Shanks - - 3
    Height - - 6.5 in
    Weight - - 1222 lb
    Maximum Digging Depth - - 13.3 in
    Maximum Ground Clearance Under Tip - - 17.6 in
    Overall Width - - 67.3 in
    Maximum Reach - Ground Line - - 30.2 in

    Dimensions
    Length of Basic Dozer (without blade) - LGP - - 129.5 in
    Width of Dozer (standard shoes, no blade) - Standard - - 79.1 in
    Dozer Height - LGP - - 108.9 in
    Dozer Height - Standard - - 108.9 in
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in
    Length of Basic Dozer (without blade) - Standard - - 129.5 in
    BLADE: Digging Depth - LGP - - 23.2 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58°
    BLADE: Blade Lift Height - LGP - - 27.9 in
    BLADE: Blade Width - LGP - - 124 in
    BLADE: Blade Width at Maximum Angle - LGP - - 113.1 in
    Track Gauge - LGP - - 67.9 in
    Ground Clearance - LGP - - 13 in
    BLADE: Blade Height - LGP - - 35.8 in
    Overall Length - With Blade - LGP - - 168.2 in
    BLADE: Blade Capacity (SAE) - LGP - - 2.42 yd³
    BLADE: Maximum Tilt - LGP - - 17.2 in
    BLADE: Maximum Angle (either side) - LGP - - 25°
    BLADE: Maximum Angle (either side) - Standard - - 25°
    Ground Clearance - Standard - - 13 in
    Overall Length - With Blade - Standard - - 168.5 in
    Note - - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58°
    BLADE: Maximum Tilt - Standard - - 15.2 in
    Track Gauge - Standard - - 61 in
    BLADE: Digging Depth - Standard - - 23.3 in
    BLADE: Blade Width - Standard - - 109.5 in
    BLADE: Blade Lift Height - Standard - - 29.3 in
    BLADE: Blade Capacity (SAE) - Standard - - 2.59 yd³
    BLADE: Blade Width at Maximum Angle - Standard - - 100.1 in
    BLADE: Blade Height - Standard - - 39.8 in

    Cab
    FOPS - - ISO 3449:2005 Level II
    ROPS - - ISO 3471:2008

    Retrieval Winch
    Maximum Line Speed - Full Drum - - 79 ft/min
    Maximum Line Speed - Bare Drum - - 50 ft/min
    Weight - - 1747 lb
    Drum Capacity - Optional Cable - - 195 ft
    Rope Diameter - Recommended - - 0.63 in
    Winch Drive - - Hydraulic
    Rope Diameter - Optional - - 0.75 in
    Drum Capacity - Recommended Cable - - 277 ft
    Maximum Line Pull - Full Drum - - 20350 lb
    Speed - - Variable
    Maximum Line Pull - Bare Drum - - 32150 lb
    Control - - Hydraulic
    Overall width - - 27.91 in
    Drum Width - - 9.65 in
    Drum Diameter - - 8 in
    Winch Length - - 35.63 in
    Throat Clearance - - 5.6 in

    High Performance Winch
    Maximum line pull – bare drum - - 40000 lb
    Drum capacity – recommended cable - - 371 ft
    Winch length - - 27.76 in
    Overall width - - 29.2 in
    Control - - Hydraulic
    Maximum line speed – bare drum - - 131 ft/min
    Maximum line speed – full drum - - 207 ft/min
    Drum width - - 10.8 in
    Drum capacity – optional - - 256 ft
    Throat clearance - - 6.75 in
    Weight - - 1345 lb
    Rope diameter – recommended - - 0.63 in
    Speed - - Variable
    Maximum line pull – full drum - - 25000 lb
    Drum diameter - - 10 in
    Rope diameter – optional - - 0.75 in
    Winch drive - - Hydrostatic
    Add a Similar Product: