Compare

Compare Equipment Go Back

Engine
	D7 Dozer View Product	D9 Dozer View Product Remove	D10 Dozer View Product Remove
Engine Model	Cat C9.3B	-	-
Power - Net	265 HP	-	-
Net Power - Rated - ISO 9249/SAE J1349	265 HP	-	-
Net Power (Rated) - ISO 9249 (DIN)	268 mhp	-	-
Emissions	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV	-	-
Note (1)	Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t	-	-
Note (2)	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (	-	-
Note (3)	Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.	-	-
Note (4)	Machine Build Number 17A	-	-
Weights
Operating Weight	65644 lb	110225 lb	154888 lb
Note (1)	Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar.	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.	D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Shipping Weight	-	84373 lb	111739 lb
Note (2)	-	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.	D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
Transmission
Power Train	Fully Automatic 4-Speed	-	-
1.0 Forward	-	2.2 mile/h	2.5 mile/h
2.0 Forward	-	3.9 mile/h	4.5 mile/h
3.0 Forward	-	6.8 mile/h	7.8 mile/h
1.0 Reverse	-	2.7 mile/h	3.2 mile/h
2.0 Reverse	-	4.8 mile/h	5.6 mile/h
3.0 Reverse	-	8.4 mile/h	9.8 mile/h
Type	-	Planetary powershift	Planetary powershift
1.5 Forward	-	-	3.4 mile/h
2.5 Forward	-	-	6 mile/h
1.5 Reverse	-	-	4.2 mile/h
2.5 Reverse	-	-	7.5 mile/h
Transmission Clutch Diameter	-	-	17 in
Service Refill Capacities
Fuel Tank	123 gal (US)	-	-
DEF Tank	12 gal (US)	-	-
Standard SU
Operating Weight	65644 lb	-	-
Ground Pressure	10 psi	-	-
Width of Standard Shoe	24 in	-	-
Blade	Semi-Universal (SU)	-	-
Blade Capacity	10 yd³	-	-
LGP S
Operating Weight	63220 lb	-	-
Ground Pressure	6 psi	-	-
Width of Standard Shoe	36 in	-	-
Blade	Straight (S)	-	-
Blade Capacity	8 yd³	-	-
Waste Handler
Operating Weight	62035 lb	-	-
Ground Pressure	10 psi	-	-
Width of Standard Shoe	24 in	-	-
Blade	Universal Landfill (U)	-	-
Blade Capacity	22 yd³	-	-
Sustainability
Recyclability	98%	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.

Note (2)	Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.	-	-
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model	-	Cat® C18	-
Engine Power - Net SAE J1349/ISO 9249	-	452 HP	-
Bore	-	5.7 in³	-
Stroke	-	7.2 in	-
Displacement	-	1106 in³	-
Engine Power - Gross SAE J1995	-	487 HP	-
Engine Power - ISO 14396	-	479 HP	-
Emissions	-	U.S. EPA Tier 2 or Tier 3 equivalent	-
Note (1)	-	All engine ratings apply at 1,750 rpm.	-
Note (2)	-	No derating required up to 4267 m (14,000 ft) altitude.	-
Undercarriage
Shoe Type	-	Extreme Service	Extreme Service (ES)
Width - Shoe	-	24 in	24 in
Shoes/Side	-	43	44
Grouser Height	-	3.3 in	3.7 in
Pitch	-	9.4 in	10.2 in
Ground Clearance	-	18.1 in	28.5 in
Track Gauge	-	88.6 in	100.4 in
Length - Track on Ground	-	136.6 in	152.8 in
Ground Contact Area	-	45.6 ft²	7347 in²
Track Rollers/Side	-	8	8
Number of Carrier Rollers	-	1 per side (optional)	1 per side (optional)
Standards
ROPS	-	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
FOPS	-	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.	Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Sound	-	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling	Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
Sound (1)	-	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c	Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
Sound (2)	-	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.	-
Note	-	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
Note (1)	-	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (2)	-	-	The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
Note (3)	-	-	The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
Steering and Brakes
Steering Type	-	Differential	Hydraulically Applied Multiple-Disc Steering Clutch
Brake Type	-	Spring Applied Wet Disc	Spring Applied Multiple- Disc Brake
Brake Diameter	-	15.5 in	15.4 in
Brake Count	-	8	10
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model	-	Cat® C18	Cat® C27
Bore	-	5.7 in³	5.4 in
Stroke	-	7.2 in³	6 in
Displacement	-	1106 in³	1648 in³
Engine Power - Gross SAE J1995	-	477 HP	-
Engine Power - ISO 14396	-	468 HP	-
Engine Power - Net SAE J1349/ISO 9249	-	440 HP	-
Emissions	-	U.S. EPA Tier 4 / EU Stage V	U.S. EPA Tier 4 Final/EU Stage V
Note (1)	-	All Engine ratings apply at 1,750 rpm.	*Excludes all fan losses.
Note (2)	-	No derating required up to 2499 m (8,200 ft).	All Engine ratings apply at 1,800 rpm.
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	-	602 HP
Engine Power - Gross SAE J1995* - Forward	-	-	631 HP
Engine Power - Gross SAE J1995* - Reverse	-	-	766 HP
Engine Power - ISO 14396* - Forward	-	-	620 HP
Engine Power - ISO 14396* - Reverse	-	-	754 HP
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	-	722 HP
Note (3)	-	-	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Note (4)	-	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)	-	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
FLUID CAPACITIES
Fuel Tank (Splash Fill)	-	254 gal (US)	-
DEF Tank (Tier 4 only)	-	9.5 gal (US)	-
Fuel Tank (Fast Fill)	-	248 gal (US)	-
Cooling System	-	21 gal (US)	-
Engine Crankcase*	-	10 gal (US)	-
Powertrain	-	40 gal (US)	-
Final Drives (each)	-	4 gal (US)	12.2 gal (US)
Roller Frames (each)	-	12 gal (US)	-
Pivot Shaft Oil	-	8 gal (US)	9.5 gal (US)
Hydraulic System Tank	-	24 gal (US)	32.2 gal (US)
Note	-	*With oil filters.	-
Note 2	-	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or	-
Note 3	-	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.	-
Note 4	-	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.	-
Cooling System Refill – Tier 4 Final Engine	-	-	46.2 gal (US)
Engine Crankcase Sump	-	-	27.2 gal (US)
Power Train - Total Volume	-	-	81.4 gal (US)
Power Train - Refill Volume	-	-	74.8 gal (US)
Track Roller Frames (each)	-	-	16.9 gal (US)
Hydraulic Controls
Pump Type	-	Piston-type geared to flywheel	Variable displacement piston
Pump Output - Steering	-	96 gal/min	-
Fan Pump	-	21 gal/min	21.7 gal/min
Tilt Cylinder Flow - Rod End Flow	-	53 gal/min	112 gal/min
Tilt Cylinder Flow - Head End Flow	-	53 gal/min	63.4 gal/min
Lift Cylinder Relief Valve Setting	-	3800 lbf/in	4061.1 psi
Tilt Cylinder Relief Valve Setting	-	2799 psi	3872.5 psi
Ripper - Lift - Relief Valve Setting	-	3800 psi	4061.1 psi
Ripper - Pitch - Relief Valve Setting	-	3800 psi	4061.1 psi
Steering System - Pressure	-	5874 psi	-
Tank Capacity	-	24 gal/min	32.2 gal (US)
Note (1)	-	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).	Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).
Note (2)	-	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).	Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
Note (3)	-	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Pump Output - Implement	-	-	112 gal/min
Cylinder Sizing - Blade Lift - Bore	-	-	5.5 in
Cylinder Sizing - Blade Tilt - Bore	-	-	8.3 in
Cylinder Sizing - Ripper Shank Lift - Bore	-	-	8.3 in
Cylinder Sizing - Ripper Shank Angle - Bore	-	-	7.1 in
Cylinder Sizing - Blade Lift - Stroke	-	-	65.1 in
Cylinder Sizing - Blade Tilt - Stroke	-	-	9.5 in
Cylinder Sizing - Ripper Shank Lift - Stroke	-	-	21.1 in
Cylinder Sizing - Ripper Shank Angle - Stroke	-	-	26 in
Blade - Semi-Universal
Blade Capacity (SAE J1265)	-	17.8 yd³	-
Blade Width (over end bits)	-	171.3 in	-
Blade Height	-	76.1 in	-
Maximum Digging Depth	-	23.9 in	-
Ground Clearance at Full Lift	-	56 in	-
Maximum Tilt	-	37 in	-
Blade Weight	-	10587 lb	-
Total Operating Weight* (with blade and single-shank ripper)	-	110205 lb	-
Note	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-
Blade - Universal
Blade Capacity (SAE J1265)	-	21.7 yd³	-
Blade Width (over end bits)	-	184.3 in	-
Blade Height	-	76.1 in	-
Maximum Digging Depth	-	23.9 in	-
Ground Clearance at Full Lift	-	56 in	-
Maximum Tilt	-	39.9 in	-
Blade Weight	-	12016 lb	-
Total Operating Weight* (with blade and single-shank ripper)	-	111362 lb	-
Note	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-
Ripper - Single Shank
Maximum penetration force * (shank vertical)	-	35520 lbf	49233 lbf
Maximum penetration depth (standard tip)	-	48.5 in	59.2 in
Pryout Force	-	74637 lbf	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	34.7 in	36 in
Number of Pockets	-	1	-
Weight	-	10701 lb	14209 lb
Total Operating Weight* (with SU Blade and noted ripper)	-	110205 lb	-
Note	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	-	38667 lbf	53055 lbf
Maximum penetration depth (standard tip)	-	68 in	78.3 in
Pryout Force	-	74412 lbf	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	32.2 in	-
Number of Pockets	-	1	-
Weight	-	10981 lb	14548 lb
Total Operating Weight* (with SU Blade and noted ripper)	-	110485 lb	-
Note	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical	-	34621 lbf	-
Maximum Penetration - Standard Tip	-	31.4 in	-
Pry-Out Force - Multi-Shank Ripper with One Tooth	-	81156 lbf	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	34.6 in	-
Number of Pockets	-	3	-
Weight	-	12136 lb	-
Total Operating Weight* - With SU-Blade and Ripper	-	111739 lb	-
Note	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-
Dimensions (Approximate)
Ground Clearance*	-	18.1 in	28.5 in
Track Gauge	-	88.6 in	100.4 in
Width - Without Trunnions - Standard Shoe	-	113 in	-
Width - Over Trunnions	-	130.3 in	148 in
Height - FOPS Cab*	-	150.4 in	162.8 in
Height - Top of Stack*	-	152.6 in	171.5 in
Height - ROPS/Canopy*	-	157.5 in	173.5 in
Drawbar Height (Center of Clevis)*	-	30 in	-
Length - Track on Ground	-	136.6 in	152.8 in
Overall Length - Basic Tractor	-	193.3 in	209.6 in
Length - Basic Tractor - With Drawbar	-	206.4 in	-
Length - Basic Tractor - With Winch	-	218.3 in	-
Length - With SU-Blade**	-	259.9 in	-
Length - With U-Blade	-	274.3 in	305.1 in
Length - With Single-Shank Ripper	-	257 in	278.8 in
Length - With Multi-Shank Ripper	-	257.4 in	285.1 in
Overall Length - SU-Blade/SS Ripper	-	323.6 in	360.6 in
Note (1)	-	*Includes grouser height for total dimensions on hard surfaces.	*Includes grouser height for total dimensions on hard surfaces.
Width - Without Trunnions - 610 mm/24 in ES	-	-	130.4 in
Length - With SU-Blade	-	-	292 in
Winches
Winch Model	-	PA 140VS	-
Weight*	-	3950 lb	-
Oil Capacity	-	4 gal (US)	-
Drum Width	-	12.6 in	-
Wire Cable Diameter - Recommended	-	1.13 in	-
Wire Cable Diameter - Optional	-	1.25 ft	-
Maximum Drum Capacity - Recommended Cable Length	-	257 in	-
Maximum Drum Capacity - Optional Cable Length	-	204 ft	-
Wire Cable Ferrule Size - Outside Diameter	-	2.4 in	-
Wire Cable Ferrule Size - Length	-	2.8 in	-
Note	-	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).	-
Note (2)	-	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.	-
Blades
10SU ABR - Capacity (SAE J1265)	-	-	24.2 yd³
10SU ABR - Width (over end bits)	-	-	194.5 in
10SU ABR - Height	-	-	83.5 in
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	-	19.98 in
10SU ABR - Digging Depth - Blade Pitch: Nominal	-	-	25.23 in
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	-	30.08 in³
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	-	66.14 in
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	-	53.86 in
10SU ABR - Ground Clearance - Maximum Tilt LH	-	-	56.3 in
10SU ABR - Ground Clearance - Maximum Tilt RH	-	-	56.3 in
10U ABR - Capacity (SAE J1265)	-	-	28.7 yd³
10U ABR - Width (over end bits)	-	-	207.1 in
10U ABR - Height	-	-	83.5 in
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	-	19.98 in
10U ABR - Digging Depth - Blade Pitch: Nominal	-	-	60 in
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	-	30.1 in
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	-	66.1 in
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	-	53.9 in
10U ABR - Ground Clearance - Maximum Tilt LH	-	-	60.8 in
10U ABR - Ground Clearance - Maximum Tilt RH	-	-	60.8 in
10U ABR - Weights - Blade Weight*	-	-	23585 lb
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)	-	-	154888 lb
Note (1)	-	-	Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
Note (2)	-	-	*Does not include hydraulic controls but includes blade cylinders, pusharms.
Note (3)	-	-	**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	-	-	Cat® C27
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	-	603 HP
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	-	722 HP
Engine Power - Gross SAE J1995* - Forward	-	-	631 HP
Engine Power - Gross SAE J1995* - Reverse	-	-	766 HP
Engine Power - ISO 14396* - Forward	-	-	622 HP
Engine Power - ISO 14396* - Reverse	-	-	756 HP
Displacement	-	-	1648 in³
Bore	-	-	5.4 in
Stroke	-	-	6 in
Emissions	-	-	U.S. EPA Tier 2 Equivalent
Note (1)	-	-	*Excludes all fan losses.
Note (2)	-	-	All Engine ratings apply at 1,800 rpm.
Note (3)	-	-	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Note (4)	-	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)	-	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
Fuel Tank Capacities
Fuel Tank - Usable Volume	-	-	323.3 gal (US)
Fuel Tank - Total Volume	-	-	335.2 gal (US)

Compare Equipment Go Back

D7 Dozer

D9 Dozer

D10 Dozer

Engine

Weights

Transmission

Service Refill Capacities

Standard SU

LGP S

Waste Handler

Sustainability

Air Conditioning System

Engine - U.S. EPA Tier 2/3 Equivalent

Undercarriage

Standards

Steering and Brakes

Engine - U.S. EPA Tier 4 Final/EU Stage V

FLUID CAPACITIES

Hydraulic Controls

Blade - Semi-Universal

Blade - Universal

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Ripper - Multi-Shank, Adjustable Parallelogram

Dimensions (Approximate)

Winches

Blades

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us