CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    844 Wheel Dozer
    View Product Remove
    D10 Dozer
    View Product Remove
    D9 Dozer
    View Product Remove
    D2 Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B C27 Cat® - - Cat® C3.6
    Power - Net 265 HP - - - 92 HP
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - - - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2 - - -
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - - - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - - - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - - - -
    Note (4) Machine Build Number 17A - - - -
    Rated Speed - 1800 r/min - - -
    Gross Power - ISO 14396 - 752 HP - - -
    Gross Power - SAE J1995 - 766 HP - - -
    Net Power - SAE J1349 - Standard Ambient - 699 HP - - -
    Net Power - SAE J1349 - High Ambient - 648 HP - - -
    Bore - 5.4 in - - -
    Stroke - 6 in - - -
    Displacement - 1649.5 in³ - - 220 in³
    Peak Torque - Speed - 2624 lb/ft - - -
    Torque Rise - 18 % - - -
    Net Power - 2,200 rpm - SAE J1349 - - - - 92 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - - 92 HP
    Power Train - - - - Hydrostatic

    Weights
    Operating Weight 65644 lb - 154888 lb 110225 lb 18382 lb
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. - D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Shipping Weight - - 111739 lb 84373 lb -
    Note (2) - - D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - - - 19066 lb

    Transmission
    Power Train Fully Automatic 4-Speed - - - -
    Transmission Type - Cat Planetary Power Shift - - -
    Converter Drive - Forward 1 - 4.5 mile/h - - -
    Converter Drive - Forward 2 - 8.3 mile/h - - -
    Converter Drive - Forward 3 - 14.2 mile/h - - -
    Converter Drive - Reverse 1 - 4.9 mile/h - - -
    Converter Drive - Reverse 2 - 9.1 mile/h - - -
    Converter Drive - Reverse 3 - 15.5 mile/h - - -
    Direct Drive - Forward 1 - Lock-up disabled - - -
    Direct Drive - Forward 2 - 8.5 mile/h - - -
    Direct Drive - Forward 3 - 15.2 mile/h - - -
    Direct Drive - Reverse 1 - 5.4 mile/h - - -
    Direct Drive - Reverse 2 - 9.6 mile/h - - -
    Direct Drive - Reverse 3 - 16.4 mile/h - - -
    1.0 Forward - - 2.5 mile/h 2.2 mile/h -
    1.5 Forward - - 3.4 mile/h - -
    2.0 Forward - - 4.5 mile/h 3.9 mile/h -
    2.5 Forward - - 6 mile/h - -
    3.0 Forward - - 7.8 mile/h 6.8 mile/h -
    1.0 Reverse - - 3.2 mile/h 2.7 mile/h -
    1.5 Reverse - - 4.2 mile/h - -
    2.0 Reverse - - 5.6 mile/h 4.8 mile/h -
    2.5 Reverse - - 7.5 mile/h - -
    3.0 Reverse - - 9.8 mile/h 8.4 mile/h -
    Transmission Clutch Diameter - - 17 in - -
    Type - - Planetary powershift Planetary powershift -
    Drive Pumps - - - - 1
    Maximum Travel Speed - Forward - - - - 5.6 mile/h
    Relief Valve Settings - - - - 7033 psi
    Maximum Travel Speed - Reverse - - - - 6.2 mile/h
    Track Motors - - - - 2

    Service Refill Capacities
    Fuel Tank 123 gal (US) - - - 51.5 gal (US)
    DEF Tank 12 gal (US) - - - -
    Fuel Tank - Standard - 286.6 gal (US) - - -
    Cooling System - 54.9 gal (US) - - 5 gal (US)
    Crankcase - 20 gal (US) - - -
    Transmission - 29.1 gal (US) - - -
    Differential - Final Drives - Front - 71.6 gal (US) - - -
    Differential - Final Drives - Rear - 68.9 gal (US) - - -
    Hydraulic System - Implement and Hydraulic Fan - 68.9 gal (US) - - -
    Hydraulic System - Steering and Braking - 34.9 gal (US) - - -
    Crankcase - With Filter - - - - 2.8 gal (US)
    Final Drive - Each - LGP - - - - 2.6 gal (US)
    Transmission - Hydraulic Tank - - - - 23.8 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - - 4.9 gal (US)
    Final Drives - Each Side - - - - 2.6 gal (US)

    Standard SU
    Operating Weight 65644 lb - - - -
    Ground Pressure 10 psi - - - -
    Width of Standard Shoe 24 in - - - -
    Blade Semi-Universal (SU) - - - -
    Blade Capacity 10 yd³ - - - -

    LGP S
    Operating Weight 63220 lb - - - -
    Ground Pressure 6 psi - - - -
    Width of Standard Shoe 36 in - - - -
    Blade Straight (S) - - - -
    Blade Capacity 8 yd³ - - - -

    Waste Handler
    Operating Weight 62035 lb - - - -
    Ground Pressure 10 psi - - - -
    Width of Standard Shoe 24 in - - - -
    Blade Universal Landfill (U) - - - -
    Blade Capacity 22 yd³ - - - -

    Sustainability
    Recyclability 98% - - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - - - -

    Operating Specifications
    Operating Weight - 165089 lb - - -
    Blade Capacities - 15.9 - 30.7 m3 (20.7 - 40.2 yd3) - - -

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - 82 gal/min - - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 133 mm × 1535 mm (5.25 in × 60.4 in) - - -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 210 mm × 188 mm (8.25 in × 7.4 in) - - -
    Relief Valve Setting - Bulldozer (Large Pump) - 2700 psi - - -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - 2920 psi - - -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing - - -
    Steering System - Pump - Piston, variable displacement - - -
    Minimum Turning Radius - Over Blade - 34 ft - - -
    Total Steering Angle - 35 ° - - -
    Maximum Flow - 94.3 gal/min - - -
    Relief Valve Setting - 4500 psi - - -

    Axles
    Front - Fixed - - -
    Rear - Trunnion - - -
    Oscillation Angle - 8.5 ° - - -

    Brakes
    Brakes - Meets ISO 3540:2011 - - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - - -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) - - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - - -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) - - -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards - - -
    FOPS - - - - ISO 3449:2005 Level II
    ROPS - - - - ISO 3471:2008

    Dimensions (Approximate)
    Height - Top of ROPS - 17.2 ft - - -
    Height - Top of Exhaust Pipe - 16.6 ft - - -
    Height - Top of Hood - 12.7 ft - - -
    Ground Clearance - 2 ft - - -
    Centerline of Front Axle to Hitch - 7.5 ft - - -
    Centerline of Rear Axle to Edge of Bumper - 12.5 ft - - -
    Wheel Base - 15.1 ft - - -
    Length - With Blade on Ground - 36.5 ft - - -
    Ground Clearance* - - 28.5 in 18.1 in -
    Track Gauge - - 100.4 in 88.6 in -
    Width - Without Trunnions - 610 mm/24 in ES - - 130.4 in - -
    Width - Over Trunnions - - 148 in 130.3 in -
    Height - FOPS Cab* - - 162.8 in 150.4 in -
    Height - Top of Stack* - - 171.5 in 152.6 in -
    Height - ROPS/Canopy* - - 173.5 in 157.5 in -
    Note (1) - - *Includes grouser height for total dimensions on hard surfaces. *Includes grouser height for total dimensions on hard surfaces. -
    Length - Track on Ground - - 152.8 in 136.6 in -
    Overall Length - Basic Tractor - - 209.6 in 193.3 in -
    Length - With SU-Blade - - 292 in - -
    Length - With U-Blade - - 305.1 in 274.3 in -
    Length - With Single-Shank Ripper - - 278.8 in 257 in -
    Length - With Multi-Shank Ripper - - 285.1 in 257.4 in -
    Overall Length - SU-Blade/SS Ripper - - 360.6 in 323.6 in -
    Width - Without Trunnions - Standard Shoe - - - 113 in -
    Drawbar Height (Center of Clevis)* - - - 30 in -
    Length - Basic Tractor - With Drawbar - - - 206.4 in -
    Length - Basic Tractor - With Winch - - - 218.3 in -
    Length - With SU-Blade** - - - 259.9 in -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - Cat® C27 Cat® C18 -
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - 602 HP - -
    Engine Power - Gross SAE J1995* - Forward - - 631 HP - -
    Engine Power - Gross SAE J1995* - Reverse - - 766 HP - -
    Engine Power - ISO 14396* - Forward - - 620 HP - -
    Engine Power - ISO 14396* - Reverse - - 754 HP - -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - 722 HP - -
    Displacement - - 1648 in³ 1106 in³ -
    Stroke - - 6 in 7.2 in³ -
    Bore - - 5.4 in 5.7 in³ -
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 / EU Stage V -
    Note (1) - - *Excludes all fan losses. All Engine ratings apply at 1,750 rpm. -
    Note (2) - - All Engine ratings apply at 1,800 rpm. No derating required up to 2499 m (8,200 ft). -
    Note (3) - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). - -
    Note (4) - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). - -
    Note (5) - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. - -
    Engine Power - Gross SAE J1995 - - - 477 HP -
    Engine Power - ISO 14396 - - - 468 HP -
    Engine Power - Net SAE J1349/ISO 9249 - - - 440 HP -

    Undercarriage
    Shoe Type - - Extreme Service (ES) Extreme Service -
    Width - Shoe - - 24 in 24 in -
    Shoes/Side - - 44 43 -
    Grouser Height - - 3.7 in 3.3 in -
    Pitch - - 10.2 in 9.4 in -
    Ground Clearance - - 28.5 in 18.1 in -
    Track Gauge - - 100.4 in 88.6 in 61 in
    Length - Track on Ground - - 152.8 in 136.6 in -
    Ground Contact Area - - 7347 in² 45.6 ft² -
    Track Rollers/Side - - 8 8 -
    Number of Carrier Rollers - - 1 per side (optional) 1 per side (optional) -
    Length - Track on Ground - LGP - - - - 89 in
    Number of Rollers - Each Side - - - - 7
    Track Gauge - LGP - - - - 68 in
    Ground Pressure - LGP - - - - 4.3 psi
    Shoe Width - Standard - - - - 18 in
    Shoe Width - LGP - - - - 25 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - - 43
    Number of Shoes - Each Side - Abrasion Undercarriage - - - - 38
    Ground Pressure - - - - 5.7 psi
    Length of Track on Ground - - - - 89 in

    Standards
    ROPS - - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. -
    FOPS - - Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. -
    Sound - - Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling -
    Note - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and - -
    Sound (1) - - Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c -
    Note (1) - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. - -
    Note (2) - - The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. - -
    Note (3) - - The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). - -
    Sound (2) - - - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. -

    Steering and Brakes
    Steering Type - - Hydraulically Applied Multiple-Disc Steering Clutch Differential -
    Brake Type - - Spring Applied Multiple- Disc Brake Spring Applied Wet Disc -
    Brake Diameter - - 15.4 in 15.5 in -
    Brake Count - - 10 8 -

    Blades
    10SU ABR - Capacity (SAE J1265) - - 24.2 yd³ - -
    10SU ABR - Width (over end bits) - - 194.5 in - -
    10SU ABR - Height - - 83.5 in - -
    10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - 19.98 in - -
    10SU ABR - Digging Depth - Blade Pitch: Nominal - - 25.23 in - -
    10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - 30.08 in³ - -
    10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - 66.14 in - -
    10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - 53.86 in - -
    10SU ABR - Ground Clearance - Maximum Tilt LH - - 56.3 in - -
    10SU ABR - Ground Clearance - Maximum Tilt RH - - 56.3 in - -
    10U ABR - Capacity (SAE J1265) - - 28.7 yd³ - -
    10U ABR - Width (over end bits) - - 207.1 in - -
    10U ABR - Height - - 83.5 in - -
    10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - 19.98 in - -
    10U ABR - Digging Depth - Blade Pitch: Nominal - - 60 in - -
    10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - 30.1 in - -
    10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - 66.1 in - -
    10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - 53.9 in - -
    10U ABR - Ground Clearance - Maximum Tilt LH - - 60.8 in - -
    10U ABR - Ground Clearance - Maximum Tilt RH - - 60.8 in - -
    10U ABR - Weights - Blade Weight* - - 23585 lb - -
    10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) - - 154888 lb - -
    Note (1) - - Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees - -
    Note (2) - - *Does not include hydraulic controls but includes blade cylinders, pusharms. - -
    Note (3) - - **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - 49233 lbf 35520 lbf -
    Maximum penetration depth (standard tip) - - 59.2 in 48.5 in -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 36 in 34.7 in -
    Weight - - 14209 lb 10701 lb -
    Note - - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -
    Pryout Force - - - 74637 lbf -
    Number of Pockets - - - 1 -
    Total Operating Weight* (with SU Blade and noted ripper) - - - 110205 lb -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - 53055 lbf 38667 lbf -
    Maximum penetration depth (standard tip) - - 78.3 in 68 in -
    Weight - - 14548 lb 10981 lb -
    Note - - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -
    Pryout Force - - - 74412 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - - 32.2 in -
    Number of Pockets - - - 1 -
    Total Operating Weight* (with SU Blade and noted ripper) - - - 110485 lb -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - - Cat® C27 - -
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - 603 HP - -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - 722 HP - -
    Engine Power - Gross SAE J1995* - Forward - - 631 HP - -
    Engine Power - Gross SAE J1995* - Reverse - - 766 HP - -
    Engine Power - ISO 14396* - Forward - - 622 HP - -
    Engine Power - ISO 14396* - Reverse - - 756 HP - -
    Displacement - - 1648 in³ - -
    Bore - - 5.4 in - -
    Stroke - - 6 in - -
    Emissions - - U.S. EPA Tier 2 Equivalent - -
    Note (1) - - *Excludes all fan losses. - -
    Note (2) - - All Engine ratings apply at 1,800 rpm. - -
    Note (3) - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). - -
    Note (4) - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). - -
    Note (5) - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. - -

    Fuel Tank Capacities
    Fuel Tank - Usable Volume - - 323.3 gal (US) - -
    Fuel Tank - Total Volume - - 335.2 gal (US) - -

    Hydraulic Controls
    Pump Type - - Variable displacement piston Piston-type geared to flywheel -
    Pump Output - Implement - - 112 gal/min - -
    Note (1) - - Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). -
    Fan Pump - - 21.7 gal/min 21 gal/min -
    Note (2) - - Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). -
    Tilt Cylinder Flow - Rod End Flow - - 112 gal/min 53 gal/min -
    Tilt Cylinder Flow - Head End Flow - - 63.4 gal/min 53 gal/min -
    Lift Cylinder Relief Valve Setting - - 4061.1 psi 3800 lbf/in -
    Tilt Cylinder Relief Valve Setting - - 3872.5 psi 2799 psi -
    Ripper - Lift - Relief Valve Setting - - 4061.1 psi 3800 psi -
    Ripper - Pitch - Relief Valve Setting - - 4061.1 psi 3800 psi -
    Tank Capacity - - 32.2 gal (US) 24 gal/min -
    Cylinder Sizing - Blade Lift - Bore - - 5.5 in - -
    Cylinder Sizing - Blade Tilt - Bore - - 8.3 in - -
    Cylinder Sizing - Ripper Shank Lift - Bore - - 8.3 in - -
    Cylinder Sizing - Ripper Shank Angle - Bore - - 7.1 in - -
    Cylinder Sizing - Blade Lift - Stroke - - 65.1 in - -
    Cylinder Sizing - Blade Tilt - Stroke - - 9.5 in - -
    Cylinder Sizing - Ripper Shank Lift - Stroke - - 21.1 in - -
    Cylinder Sizing - Ripper Shank Angle - Stroke - - 26 in - -
    Note (3) - - Electro-hydraulic pilot valves assist operations of ripper and dozer controls. Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) -
    Pump Output - Steering - - - 96 gal/min -
    Steering System - Pressure - - - 5874 psi -
    Pump Output - - - - 17.2 gal/min
    Relief Valve Settings - - - - 2988 psi

    FLUID CAPACITIES
    Cooling System Refill – Tier 4 Final Engine - - 46.2 gal (US) - -
    Engine Crankcase Sump - - 27.2 gal (US) - -
    Power Train - Total Volume - - 81.4 gal (US) - -
    Power Train - Refill Volume - - 74.8 gal (US) - -
    Final Drives (each) - - 12.2 gal (US) 4 gal (US) -
    Track Roller Frames (each) - - 16.9 gal (US) - -
    Pivot Shaft Oil - - 9.5 gal (US) 8 gal (US) -
    Hydraulic System Tank - - 32.2 gal (US) 24 gal (US) -
    Fuel Tank (Splash Fill) - - - 254 gal (US) -
    DEF Tank (Tier 4 only) - - - 9.5 gal (US) -
    Fuel Tank (Fast Fill) - - - 248 gal (US) -
    Cooling System - - - 21 gal (US) -
    Engine Crankcase* - - - 10 gal (US) -
    Powertrain - - - 40 gal (US) -
    Roller Frames (each) - - - 12 gal (US) -
    Note - - - *With oil filters. -
    Note 2 - - - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or -
    Note 3 - - - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. -
    Note 4 - - - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - - - Cat® C18 -
    Engine Power - Net SAE J1349/ISO 9249 - - - 452 HP -
    Bore - - - 5.7 in³ -
    Stroke - - - 7.2 in -
    Displacement - - - 1106 in³ -
    Engine Power - Gross SAE J1995 - - - 487 HP -
    Engine Power - ISO 14396 - - - 479 HP -
    Emissions - - - U.S. EPA Tier 2 or Tier 3 equivalent -
    Note (1) - - - All engine ratings apply at 1,750 rpm. -
    Note (2) - - - No derating required up to 4267 m (14,000 ft) altitude. -

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - - - 17.8 yd³ -
    Blade Width (over end bits) - - - 171.3 in -
    Blade Height - - - 76.1 in -
    Maximum Digging Depth - - - 23.9 in -
    Ground Clearance at Full Lift - - - 56 in -
    Maximum Tilt - - - 37 in -
    Blade Weight - - - 10587 lb -
    Total Operating Weight* (with blade and single-shank ripper) - - - 110205 lb -
    Note - - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Blade - Universal
    Blade Capacity (SAE J1265) - - - 21.7 yd³ -
    Blade Width (over end bits) - - - 184.3 in -
    Blade Height - - - 76.1 in -
    Maximum Digging Depth - - - 23.9 in -
    Ground Clearance at Full Lift - - - 56 in -
    Maximum Tilt - - - 39.9 in -
    Blade Weight - - - 12016 lb -
    Total Operating Weight* (with blade and single-shank ripper) - - - 111362 lb -
    Note - - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - - - 34621 lbf -
    Maximum Penetration - Standard Tip - - - 31.4 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - - 81156 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - - 34.6 in -
    Number of Pockets - - - 3 -
    Weight - - - 12136 lb -
    Total Operating Weight* - With SU-Blade and Ripper - - - 111739 lb -
    Note - - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Winches
    Winch Model - - - PA 140VS -
    Weight* - - - 3950 lb -
    Oil Capacity - - - 4 gal (US) -
    Drum Width - - - 12.6 in -
    Wire Cable Diameter - Recommended - - - 1.13 in -
    Wire Cable Diameter - Optional - - - 1.25 ft -
    Maximum Drum Capacity - Recommended Cable Length - - - 257 in -
    Maximum Drum Capacity - Optional Cable Length - - - 204 ft -
    Wire Cable Ferrule Size - Outside Diameter - - - 2.4 in -
    Wire Cable Ferrule Size - Length - - - 2.8 in -
    Note - - - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). -
    Note (2) - - - Variable speed, hydraulically driven, dual braking system, three-roller fairlead. -

    Ripper
    Type - - - - Parallelogram
    Number of Shanks - - - - 3
    Height - - - - 6.5 in
    Weight - - - - 1222 lb
    Maximum Digging Depth - - - - 13.3 in
    Maximum Ground Clearance Under Tip - - - - 17.6 in
    Overall Width - - - - 67.3 in
    Maximum Reach - Ground Line - - - - 30.2 in

    Dimensions
    Length of Basic Dozer (without blade) - LGP - - - - 129.5 in
    Width of Dozer (standard shoes, no blade) - Standard - - - - 79.1 in
    Dozer Height - LGP - - - - 108.9 in
    Dozer Height - Standard - - - - 108.9 in
    Width of Dozer (standard shoes, no blade) - LGP - - - - 92.9 in
    Length of Basic Dozer (without blade) - Standard - - - - 129.5 in
    BLADE: Digging Depth - LGP - - - - 23.2 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - - 52° to 58°
    BLADE: Blade Lift Height - LGP - - - - 27.9 in
    BLADE: Blade Width - LGP - - - - 124 in
    BLADE: Blade Width at Maximum Angle - LGP - - - - 113.1 in
    Track Gauge - LGP - - - - 67.9 in
    Ground Clearance - LGP - - - - 13 in
    BLADE: Blade Height - LGP - - - - 35.8 in
    Overall Length - With Blade - LGP - - - - 168.2 in
    BLADE: Blade Capacity (SAE) - LGP - - - - 2.42 yd³
    BLADE: Maximum Tilt - LGP - - - - 17.2 in
    BLADE: Maximum Angle (either side) - LGP - - - - 25°
    BLADE: Maximum Angle (either side) - Standard - - - - 25°
    Ground Clearance - Standard - - - - 13 in
    Overall Length - With Blade - Standard - - - - 168.5 in
    Note - - - - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - - 52° to 58°
    BLADE: Maximum Tilt - Standard - - - - 15.2 in
    Track Gauge - Standard - - - - 61 in
    BLADE: Digging Depth - Standard - - - - 23.3 in
    BLADE: Blade Width - Standard - - - - 109.5 in
    BLADE: Blade Lift Height - Standard - - - - 29.3 in
    BLADE: Blade Capacity (SAE) - Standard - - - - 2.59 yd³
    BLADE: Blade Width at Maximum Angle - Standard - - - - 100.1 in
    BLADE: Blade Height - Standard - - - - 39.8 in

    Retrieval Winch
    Maximum Line Speed - Full Drum - - - - 79 ft/min
    Maximum Line Speed - Bare Drum - - - - 50 ft/min
    Weight - - - - 1747 lb
    Drum Capacity - Optional Cable - - - - 195 ft
    Rope Diameter - Recommended - - - - 0.63 in
    Winch Drive - - - - Hydraulic
    Rope Diameter - Optional - - - - 0.75 in
    Drum Capacity - Recommended Cable - - - - 277 ft
    Maximum Line Pull - Full Drum - - - - 20350 lb
    Speed - - - - Variable
    Maximum Line Pull - Bare Drum - - - - 32150 lb
    Control - - - - Hydraulic
    Overall width - - - - 27.91 in
    Drum Width - - - - 9.65 in
    Drum Diameter - - - - 8 in
    Winch Length - - - - 35.63 in
    Throat Clearance - - - - 5.6 in

    High Performance Winch
    Maximum line pull – bare drum - - - - 40000 lb
    Drum capacity – recommended cable - - - - 371 ft
    Winch length - - - - 27.76 in
    Overall width - - - - 29.2 in
    Control - - - - Hydraulic
    Maximum line speed – bare drum - - - - 131 ft/min
    Maximum line speed – full drum - - - - 207 ft/min
    Drum width - - - - 10.8 in
    Drum capacity – optional - - - - 256 ft
    Throat clearance - - - - 6.75 in
    Weight - - - - 1345 lb
    Rope diameter – recommended - - - - 0.63 in
    Speed - - - - Variable
    Maximum line pull – full drum - - - - 25000 lb
    Drum diameter - - - - 10 in
    Rope diameter – optional - - - - 0.75 in
    Winch drive - - - - Hydrostatic
    Add a Similar Product: