U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV
-
-
Note (1)
Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
-
Note (2)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
Note (3)
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
-
-
Note (4)
Machine Build Number 17A
-
-
Displacement
-
220 in³
-
Net Power - 2,200 rpm - SAE J1349
-
92 HP
-
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
-
92 HP
-
Power Train
-
Hydrostatic
-
Weights
Operating Weight
65644 lb
18382 lb
-
Note (1)
Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar.
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
Operating Weight - LGP
-
19066 lb
-
Note (2)
-
For machine with ripper, add 554 kg (1,222 lb).
-
Transmission
Power Train
Fully Automatic 4-Speed
-
-
Drive Pumps
-
1
-
Maximum Travel Speed - Forward
-
5.6 mile/h
-
Relief Valve Settings
-
7033 psi
-
Maximum Travel Speed - Reverse
-
6.2 mile/h
-
Track Motors
-
2
-
Service Refill Capacities
Fuel Tank
123 gal (US)
51.5 gal (US)
-
DEF Tank
12 gal (US)
-
-
Crankcase - With Filter
-
2.8 gal (US)
-
Final Drive - Each - LGP
-
2.6 gal (US)
-
Cooling System
-
5 gal (US)
-
Transmission - Hydraulic Tank
-
23.8 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
-
4.9 gal (US)
-
Final Drives - Each Side
-
2.6 gal (US)
-
Standard SU
Operating Weight
65644 lb
-
-
Ground Pressure
10 psi
-
-
Width of Standard Shoe
24 in
-
-
Blade
Semi-Universal (SU)
-
-
Blade Capacity
10 yd³
-
-
LGP S
Operating Weight
63220 lb
-
-
Ground Pressure
6 psi
-
-
Width of Standard Shoe
36 in
-
-
Blade
Straight (S)
-
-
Blade Capacity
8 yd³
-
-
Waste Handler
Operating Weight
62035 lb
-
-
Ground Pressure
10 psi
-
-
Width of Standard Shoe
24 in
-
-
Blade
Universal Landfill (U)
-
-
Blade Capacity
22 yd³
-
-
Sustainability
Recyclability
98%
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Note (2)
Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.
-
-
Hydraulic Controls
Pump Output
-
17.2 gal/min
-
Relief Valve Settings
-
2988 psi
-
Ripper
Type
-
Parallelogram
-
Number of Shanks
-
3
-
Height
-
6.5 in
-
Weight
-
1222 lb
-
Maximum Digging Depth
-
13.3 in
-
Maximum Ground Clearance Under Tip
-
17.6 in
-
Overall Width
-
67.3 in
-
Maximum Reach - Ground Line
-
30.2 in
-
Dimensions
Length of Basic Dozer (without blade) - LGP
-
129.5 in
-
Width of Dozer (standard shoes, no blade) - Standard
-
79.1 in
-
Dozer Height - LGP
-
108.9 in
-
Dozer Height - Standard
-
108.9 in
-
Width of Dozer (standard shoes, no blade) - LGP
-
92.9 in
-
Length of Basic Dozer (without blade) - Standard
-
129.5 in
-
BLADE: Digging Depth - LGP
-
23.2 in
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
-
52° to 58°
-
BLADE: Blade Lift Height - LGP
-
27.9 in
-
BLADE: Blade Width - LGP
-
124 in
-
BLADE: Blade Width at Maximum Angle - LGP
-
113.1 in
-
Track Gauge - LGP
-
67.9 in
-
Ground Clearance - LGP
-
13 in
-
BLADE: Blade Height - LGP
-
35.8 in
-
Overall Length - With Blade - LGP
-
168.2 in
-
BLADE: Blade Capacity (SAE) - LGP
-
2.42 yd³
-
BLADE: Maximum Tilt - LGP
-
17.2 in
-
BLADE: Maximum Angle (either side) - LGP
-
25°
-
BLADE: Maximum Angle (either side) - Standard
-
25°
-
Ground Clearance - Standard
-
13 in
-
Overall Length - With Blade - Standard
-
168.5 in
-
Note
-
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
-
52° to 58°
-
BLADE: Maximum Tilt - Standard
-
15.2 in
-
Track Gauge - Standard
-
61 in
-
BLADE: Digging Depth - Standard
-
23.3 in
-
BLADE: Blade Width - Standard
-
109.5 in
-
BLADE: Blade Lift Height - Standard
-
29.3 in
-
BLADE: Blade Capacity (SAE) - Standard
-
2.59 yd³
-
BLADE: Blade Width at Maximum Angle - Standard
-
100.1 in
-
BLADE: Blade Height - Standard
-
39.8 in
-
Cab
FOPS
-
ISO 3449:2005 Level II
-
ROPS
-
ISO 3471:2008
-
Undercarriage
Length - Track on Ground - LGP
-
89 in
-
Track Gauge
-
61 in
-
Number of Rollers - Each Side
-
7
-
Track Gauge - LGP
-
68 in
-
Ground Pressure - LGP
-
4.3 psi
-
Shoe Width - Standard
-
18 in
-
Shoe Width - LGP
-
25 in
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
-
43
-
Number of Shoes - Each Side - Abrasion Undercarriage