CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    995 Wheel Loader
    View Product
    972 XE
    View Product Remove
    980 XE
    View Product Remove

    Engine
    Engine Model Cat® 3516E Cat C9.3B Cat C13
    Emissions U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent - -
    Engine Power - ISO 14396 1847 HP - -
    Gross Power - SAE J1995 1870 HP - -
    Net Power - SAE J1349 - Standard Ambient 1739 HP - -
    Net Power - SAE J1349 - High Ambient 1696 HP - -
    Bore 6.7 in - -
    Stroke 8.5 in - -
    Displacement 4766 in³ 9.3 L -
    Peak Torque - 1,200 rpm - SAE J1995 8549 lb/ft - -
    Torque Rise 39% - -
    Note (1) The power ratings apply when tested under the reference conditions for the specified standard. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards.
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Note (3) The gross power advertised is with the fan at maximum speed. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
    Engine Power @ 1,600 rpm - ISO 14396:2002 - 339 HP -
    Gross Power @ 1,600 rpm - SAE J1995:2014 - 343 HP -
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 - 316 HP -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 - 1287 ft-lb -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1375 lb/ft 1612 lb/ft
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1388 lb/ft 1627 lb/ft
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 393 HP
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1539 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 420 HP
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 425 HP

    Operating Specifications
    Operating Weight - Standard 543772 lb - -
    Bucket Capacity Range 17.2-43.6 m3 (22.3-57 yd3) - -
    Operating Weight - High Lift 547675 lb - -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Note *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
    Cat Truck Match - Standard 785/789 - -
    Cat Truck Match - High Lift 789/793/794 - -
    Breakout Force - 44072 lb 51008 lbf
    Note (1) - For a machine configuration as defined under Weight. For a machine configuration as defined under Weight.
    Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - 17505 kg 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - 35919 lb 43432 lb

    Complete System Fill
    Fuel Tank - Standard 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment 1414 gal (US) - -
    Cooling System 138 gal (US) - -
    Engine Crankcase 76 gal (US) - -
    Transmission 110 gal (US) - -
    Differential - Final Drives - Front 220 gal (US) - -
    Differential - Final Drives - Rear 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan 270 gal (US) - -
    Hydraulic Tank - Steering and Braking 100 gal (US) - -
    Oil Renewal System (ORS)* 20 gal (US) - -
    Note *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Axles
    Front Fixed - -
    Rear Trunnion - -
    Oscillation Angle 9° - -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 119 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 117 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing - -
    Steering System - Pump Piston, Variable Displacement - -
    Total Steering Angle 80 degrees - -
    Steering Cycle Times - Low Idle 7.6 s - -
    Steering Cycle Times - High Idle 4.3 s - -

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift 28.8 ft - -
    Clearance at Maximum Lift 19.8 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 21.9 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 39.3 ft - -
    Maximum Overall Length 64.6 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.5 degrees - -
    Rack Back Angle - Carry 47.7 degrees - -
    Rack Back Angle - Ground Level 39.7 degrees - -
    Reach - Maximum Lift 9.6 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift 31.6 ft - -
    Clearance at Maximum Lift 22.6 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 24.2 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 42.1 ft - -
    Maximum Overall Length 66.9 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.4 degrees - -
    Rack Back Angle - Carry 53.5 degrees - -
    Rack Back Angle - Ground Level 45 degrees - -
    Reach - Maximum Lift 9.4 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Transmission
    Transmission Type Cat Planetary Power Shift - -
    Forward - 1 4.6 mile/h 4.1 mile/h 4.4 mile/h
    Forward - 2 8 mile/h 8.4 mile/h 8.4 mile/h
    Forward - 3 13.6 mile/h 15 mile/h 14.9 mile/h
    Reverse - 1 5 mile/h 4.5 mile/h 5 mile/h
    Reverse - 2 8.8 mile/h 9.2 mile/h 9.6 mile/h
    Reverse - 3 14.9 mile/h 16.5 mile/h 18.3 mile/h
    Direct Drive - Forward 1 Lock-up disables - -
    Direct Drive - Forward 2 8.7 mile/h - -
    Direct Drive - Forward 3 15.2 mile/h - -
    Direct Drive - Reverse 1 Lock-up disables - -
    Direct Drive - Reverse 2 9.6 mile/h - -
    Direct Drive - Reverse 3 16.8 mile/h - -
    Note Travel speeds based on 58/85-57 tires. Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Forward - 4 - 24.5 mile/h 24.5 mile/h
    Reverse - 4 - 24.5 mile/h -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control - -
    Lift/Tilt System - Pump Variable Displacement Piston - -
    Maximum Flow at 1,700 rpm Engine Speed 541 gal/min - -
    Relief Valve Setting - Lift/Tilt 5004 psi - -
    Cylinders, Double Acting - Lift, Bore and Stroke 370 × 1713 mm (14.6 × 67.4 in) - -
    Cylinders, Double Acting - Tilt, Bore and Stroke 310 × 1086 mm (12.2 × 42.8 in) - -
    Pilot System Open Loop and Pressure Reducing - -

    Hydraulic Cycle Times
    Rack Back 4.9 s - -
    Raise 12.6 s - -
    Dump 3.1 s - -
    Lower Float Down 4.2 s - -

    Brakes
    Brakes ISO 3450:2011 - -

    Weights
    Operating Weight - 54858 lb 66877 lb
    Note - Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Bucket Capacities
    Bucket Range - 2.8-14.0 m³ 3.75-18.25 yd³ 4.0-14.5 m³ 5.25-19 yd³

    Sound
    Note (1) - ** For machines in European Union countries and in countries that adopt the EU Directives. For machines in European Union countries and in countries that adopt the EU Directives.
    Note (2) - ***European Union Directive 2000/14/EC as amended by 2005/88/EC. European Union Directive 2000/14/EC as amended by 2005/88/EC.
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 108 110
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 69 dB(A) 70 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 109 dB(A) 107 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 76 75
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 70 dB(A) 70 dB(A)
    With Cooling Fan Speed at Maximum Value - Note - Distance of 15 m (49.2 ft), moving forward in second gear ratio. -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Service Refill Capacities
    Cooling System - 17.4 gal (US) 13.7 gal (US)
    Crankcase - 6.1 gal (US) 9.8 gal (US)
    DEF Tank - 6.9 gal (US) 5.5 gal (US)
    Differential - Final Drives - Front - 15.1 gal (US) 24.3 gal (US)
    Differential - Final Drives - Rear - 15.1 gal (US) 24.3 gal (US)
    Fuel Tank - 80.1 gal (US) 112.5 gal (US)
    Hydraulic Tank - 30.1 gal (US) 40.4 gal (US)
    Transmission - 15.5 gal (US) 20.3 gal (US)

    Hydraulic System
    Implement System - Maximum Operating Pressure - 4496 psi 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - 99 gal/min -
    Hydraulic Cycle Time - Total - 10.7 seconds 10.1 seconds

    Dimensions
    Note - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.1 ft 8.9 ft
    Centerline of Rear Axle to Hitch - 5.1 ft 6.3 ft
    Ground Clearance - 1.4 ft 1.5 ft
    Height - Top of Exhaust Pipe - 11.8 ft 12.5 ft
    Height - Top of Hood - 9.5 ft 10.1 ft
    Height - Top of ROPS - 11.1 ft 12.7 ft
    Hinge Pin Height at Carry - 2.6 ft 2.2 ft
    Hinge Pin Height at Maximum Lift - 15.9 ft 15.7 ft
    Lift Arm Clearance at Maximum Lift - 13.8 ft 13.6 ft
    Overall Length - Without Bucket - 26.6 ft 27.5 ft
    Tread Width - 7.3 ft 8 ft
    Wheel Base - 11.8 ft 12.6 ft
    Width over Tires (Loaded) - 9.11 ft 10.9 ft
    Rack Back at Ground - 37 degrees -
    Rack Back - Maximum Lift - 71 degrees -
    Rack Back - Carry Height - 49 degrees -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch - 5.1 ft 6.3 ft
    Ground Clearance - 420 mm 456 mm
    Height - Top of Exhaust Pipe - 3527 mm 3764 mm
    Height - Top of Hood - 2846 mm 3064 mm
    Height - Top of ROPS - 3589 mm 3829 mm
    Hinge Pin Height at Carry - 2.2 ft 2 ft
    Hinge Pin Height at Maximum Lift - 4464 mm 4554 mm
    Lift Arm Clearance at Maximum Lift - 3843 mm 3881 mm
    Overall Length - Without Bucket - 7731 mm 8155 mm
    Tread Width - 7.3 ft 8 ft
    Wheel Base - 3550 mm 3800 mm
    Width over Tires (Loaded) - 9.11 ft 10.9 ft
    Rack Back - Carry Height - 49 degrees -
    Rack Back at Ground - 39 degrees -
    Centerline of Rear Axle to Edge of Counterweight - 8 ft 8.7 ft
    Rack Back - Maximum Lift - 56 degrees -

    Sustainability
    Recyclability - - 98%
    Add a Similar Product: